Design optimization of radially magnetized, iron-cored, tubular permanent-magnet machines and drive systems

In this paper we deduce, from analytical field solutions, the influence of leading design parameters on the performance of a radially magnetized, iron-cored, tubular permanent-magnet machine and its drive system. We derive analytical formulas for predicting the open-circuit electromotive force, the thrust force, the iron loss, and the winding resistance and inductances, as well as the converter losses. The force density, the machine and drive system efficiencies, and the power factor and converter volt-ampere (VA) rating are established as functions of a set of machine dimensional ratios, with due account of magnetic saturation and subject to a specified thermal constraint. We validate the utility and accuracy of the analytically derived formulas by finite-element calculations. Finally, we show that the design optimization of such a linear drive system must account for the losses and VA rating of the converter as well as the design parameters of the tubular machine.     

Effect of magnetic hysteresis on rotational losses in heteropolar magnetic bearings

This paper extends a method for predicting rotational losses for laminated rotors of heteropolar magnetic bearings by using an eddy-current model to include the effect of magnetic hysteresis in the rotor material. It compares the modeling results to the experimental data that were used earlier to assess the loss model neglecting hysteresis. The correction to the total electromagnetic loss in the rotor due to the hysteresis is significant at rotational speeds below 6000 revolutions per minute (RPM), where the model including hysteresis effects provides much better agreement with existing experimental data.     

Analysis of two-dimensional shielded pole heads using singular expansion functions

We have used a series of singular expansion functions to represent the potential across the gap of a shielded pole head in the presence of a highly permeable underlayer. This method of analysis reduces the size of the system of equations to be solved for the series coefficients to the number of coefficients that will be used. Just two series terms suffice to evaluate the magnetic potential to within 1% of the pole potential at any point on the air-bearing surface for a large range of head dimensions. Here, we express the surface field spectrum analytically. Including just two series terms provides an excellent estimate.     

Properties of fine-grained graphites based on two-component fillers

The effect of the nature of two-component fillers on the physical and mechanical properties of finegrained graphites was studied using highly oriented needle coke and nearly isotropic synthetic graphite as components of fillers. Each filler was prepared in the form of coarse (-120 µm) and fine (-10 µm) powders. Different mixtures of these components were used in producing graphite samples, which were then characterized by density, thermal expansion, compressive strength, and modulus of elasticity measurements. The results demonstrate that the thermal expansion, compressive strength, and modulus of elasticity of the graphites thus prepared depend on the microtexture, size, and shape of the filler particles.Translated from Neorganicheskie Materialy, Vol. 40, No. 12, 2004, pp. 1448–1454.Original Russian Text Copyright © 2004 by Samoilov.     

Composition, Structure, and Thermal Expansion of Ca3Fe4S3O6 and CaFeSO

The iron calcium oxysulfides Ca₃Fe₄S₃O₆ and CaFeSO are synthesized by reacting mixtures of CaO and FeS in an inert atmosphere. Their elemental compositions and lattice parameters are determined by x-ray microanalysis and x-ray diffraction. From the temperature-dependent lattice parameters of the oxysulfides (measured up to 1020 K), their thermal expansion coefficients are evaluated.     

Nonadditivity of Properties and the Possibility of Formation of Ensembles of Incommensurate Structures in the GaSe–Ga2Se3 System

The GaSe–Ga₂Se₃ system is studied by x-ray diffraction, electron microscopy, and differential scanning calorimetry. The results demonstrate that the nonadditivity of heat capacity observed near the eutectic composition after quenching is similar to the nonadditivity of properties in misfit layer compounds, which contain incommensurate structural components. The origin of this similarity is discussed in terms of the self-organization of interacting incommensurate elements in the melt and the formation of unstable suprastructural ensembles.     

Stability of a floating cylinder

A cylinder having a length less than 0.707 of its diameter will float with its axis vertical while one of length exceeding one diameter floats with its axis horizontal. This transition range was investigated and under certain circumstances, two stable positions of the cylinder axis were found in each quadrant of rotation. Details of behaviour in the transition range were attributed to the edges of the square-ended cylinder.     

A family of lower- and higher-order transversal linearization techniques in non-linear stochastic engineering dynamics

Sample pathwise numerical integration of noise-driven engineering dynamical systems cannot generally be performed beyond a limited level of accuracy, especially when the noise processes are modelled using (filtered) white noises. Recently, a locally transversal linearization (LTL) strategy has been proposed by the author (Proc Roy Soc London A 2001; 457 :539–566) for direct integration of deterministic and stochastic non-linear dynamical systems. The present effort is focussed on a host of extensions along with detailed theoretical error analyses of the linearization approach, especially as applied to problems in non-linear stochastic engineering dynamics. Thus, to begin with, estimates of local and global error orders in the basic LTL scheme are obtained separately for the displacement and velocity vectors when the system is driven either by a set of additive noises or by an arbitrary combination of (independently evolving) additive and multiplicative noises. Following this, a new family of higher-order LTL schemes is proposed in order to improve upon the basic LTL method and the associated error orders are established. A stepwise implementation of the lower- and higher-order versions of the LTL method, along with certain computational aspects, is also outlined. The proposed schemes are numerically illustrated, to a limited extent, for a single degree-of-freedom (SDOF) and a two degree-of-freedom (TDOF) non-linear engineering systems under additive and/or multiplicative white noise excitations. Copyright © 2004 John Wiley & Sons, Ltd.     

Fixed mesh front‐tracking methodology for finite element simulations

A direct front‐tracking method using an Eulerian–Lagrangian formulation is developed in two space dimensions. The front‐tracking method is general in that it can track any type of interface once its local velocity is specified or has been determined by calculation. The method uses marker points to describe the interface position and tracks the interface evolution on a fixed finite‐element mesh, including growth, contraction, splitting and merging. Interfacial conditions are applied directly at the interface position. The method is applied to three scenarios that involve different interface conditions and are based on energy and mass diffusion. The three calculations are for the dendritic solidification of a pure substance, the cellular growth of an alloy, and the Ostwald ripening of silica particles in silicon. Numerical results show that very complicated interface morphologies and topological changes can be simulated properly and efficiently. Copyright © 2004 John Wiley & Sons, Ltd.     

Optimization of support positions to maximize the fundamental frequency of structures

In this paper, the position optimization of simple supports is implemented to maximize the fundamental frequency of a beam or plate structure. Both elastic and rigid supports are taken into account. First, the frequency sensitivity with respect to the movement of a simple support is derived using the discrete method. By means of the shape functions of the finite element method, closed‐form sensitivity formulations are developed straightforwardly. Then, a heuristic approach, called evolutionary shift method, is presented for optimizing support positions with a fixed grid mesh scheme. Based on the design sensitivity analysis, the support with the highest efficiency is shifted in priority along the elementary edges with the interval (step) of the elementary size. To facilitate the convergence of the process, the interpolation technique is employed to evaluate the solution more accurately. Finally, three numerical examples are presented to demonstrate the validity of the sensitivity analysis and the effectiveness of the optimization method. Copyright © 2004 John Wiley & Sons, Ltd.