Anatomically constrained electrical impedance tomography forthree-dimensional anisotropic bodies

As shown previously for two-dimensional geometries, anisotropy effects should not be ignored in electrical impedance tomography (EIT) and structural information is important for the reconstruction of anisotropic conductivities. Here, we describe the static reconstruction of an anisotropic conductivity distribution for the more realistic three-dimensional (3-D) case. Boundaries between different conductivity regions are anatomically constrained using magnetic resonance imaging (MRI) data. The values of the conductivities are then determined using gradient-type-algorithms in a nonlinear-indirect approach. At each iteration, the forward problem is solved by the finite element method. The approach is used to reconstruct the 3-D conductivity profile of a canine torso. Both computational performance and simulated reconstruction results are presented together with a detailed study on the sensitivity of the prediction error with respect to different parameters. In particular, the use of an intracavity catheter to better extract interior conductivities is demonstrated     

A transimpedance CMOS multichannel amplifier with a 50 Ω-wideoutput range buffer for high counting rate applications

A fast transimpedance multichannel amplifier has been designed, fabricated in CMOS 1.2-μm technology and tested. Each channel consists of a current sensitive preamplifier followed by a voltage amplification stage and an on-chip buffer able to drive 50 Ω loads with an output range of ±800 mV. Measured peaking time at the output is 40 ns and the circuit recovers to baseline in 90 ns. This results in a counting capability of more than 10⁷ hits/s, Signals of both polarities can be handled. The first two stages consume a total of 2 mW per channel and the 50 Ω buffer consumes another 17 mW. The equivalent noise charge (ENC) is 1100 e^- rms with a slope of 40e^-/pF. The IC is intended for use in gas and solid-state detectors with high particle rate and extensive charge release as in high energy calorimetry     

A Metallographic Study of the High-Temperature Decomposition of Austenite in Alloy Steels Containing Mo and Cr

Optical and electron microscopy have been used to study the complex microstructures developed during the isothermal decomposition of austenite above 550°C in Fe-4Mo-0.2C and Fe-10Cr-0.4C alloy steels. As the transformation temperature is decreased, the decomposition products change from the disordered growth of nodular alloy pearlites to blocky ferrite structures containing fine dispersions of alloy carbide, and finally to acicular ferrite structures also containing alloy carbide. The branched M₆C and M₂₃C₆ of the high-temperature pearlite is replaced by Mo₂C and M₇C₃ with a fibrous or lath morphology in the lower temperature structures. The decomposition microstructures are explained in terms of a model which takes account of the growth of particular alloy carbides at the interfaces of ferrite allotriomorphs, where the growth mechanism, and hence the morphology, is sensitive to transformation temperature.     

Differentiation of Arthroderma spp. by random amplification of polymorphic DNA (RAPD) and Southern hybridization

To develop the molecular differentiation analysis of dermatophytes, we carried out RAPD and Southern hybridization analyses using genomic DNAs of six Arthroderma species, including A. fulvum, A. grubyi, A. gypseum, A. incurvatum, A. otae and A. racemosum. The RAPD analysis gave different band patterns specific to each of the six Arthroderma fungi. However, minor differences in the banding patterns were observed between the strains of plus (+) and minus (-) mating types of A. gypseum, A. fulvum and A. incurvatum. Southern blot analysis using a probe (1S) obtained from A. grubyi DNA gave specific bands only in the DNA samples of A. grubyi and A. incurvatum. On the other hand, Southern blot analysis using a probe (C3) obtained from A. otae DNA gave specific bands in all six Arthroderma species examined, and the size of the bands were specific to each species. These findings indicate that RAPD and Southern hybridization analyses are useful in the differentiation of these Arthroderma species.     

Supramedullary modulation of sympathetic vasomotor function

1. Supramedullary structures including the ventral medial prefrontal cortex (MPFC) and the midbrain cuneiform nucleus (CnF) project directly and indirectly to premotor sympatho-excitatory neurons of the rostral ventrolateral medulla (RVLM) that are critically involved in the generation of sympathetic vasomotor tone. 2. Electrophysiological studies have demonstrated that activation of depressor sites within the MPFC is associated with splanchnic sympathetic vasomotor inhibition and inhibition of the activity of RVLM sympathoexcitatory neurons. 3. Antidromic mapping and anatomical studies support the notion that a relay in the nucleus tractus solitarius is involved in the cardiovascular response to MPFC stimulation. 4. The midbrain CnF, which lies adjacent to the midbrain periaqueductal grey, is a sympathoexcitatory region of the midbrain reticular formation. Sympathoexcitatory responses evoked from the CnF are associated with short-latency excitation of RVLM neurons. 5. Cuneiform nucleus stimulation induces the expression of mRNA for the immediate early genes c-fos and NGFI-A in mid-brain, pontine and hypothalamic structures. 6. The MPFC and CnF are supramedullary structures with opposing modulatory influences on sympathetic vasomotor drive, whose roles in cardiovascular control mechanisms warrant further investigation.     

Quality of data regarding diagnoses of spinal disorders in administrative databases. A multicenter study

The purpose of the present study was to evaluate the accuracy of data regarding diagnoses of spinal disorders in administrative databases at eight different institutions. The records of 189 patients who had been managed for a disorder of the lumbar spine were independently reviewed by a physician who assigned the appropriate diagnostic codes according to the International Classification of Diseases, Ninth Revision, Clinical Modification (ICD-9-CM). The age range of the 189 patients was seventeen to eighty-four years. The six major diagnostic categories studied were herniation of a lumbar disc, a previous operation on the lumbar spine, spinal stenosis, cauda equina syndrome, acquired spondylolisthesis, and congenital spondylolisthesis. The diagnostic codes assigned by the physician were compared with the codes that had been assigned during the ordinary course of events by personnel in the medical records department of each of the eight hospitals. The accuracy of coding was also compared among the eight hospitals, and it was found to vary depending on the diagnosis. Although there were both false-negative and false-positive codes at each institution, most errors were related to the low sensitivity of coding for previous spinal operations: only seventeen (28 per cent) of sixty-one such diagnoses were coded correctly. Other errors in coding were less frequent, but their implications for conclusions drawn from the information in administrative databases depend on the frequency of a diagnosis and its importance in an analysis. This study demonstrated that the accuracy of a diagnosis of a spinal disorder recorded in an administrative database varies according to the specific condition being evaluated. It is necessary to document the relative accuracy of specific ICD-9-CM diagnostic codes in order to improve the ability to validate the conclusions derived from investigations based on administrative databases.     

A Hammerstein-based dynamic model for hysteresis phenomenon

The Hammerstein configuration, which includes a nonlinear static block followed by a linear dynamic block, is applied to model the rate-dependent and temperature-dependent hysteresis phenomenon. The nonlinear static block is realized by a modified Preisach model, which includes both the irreversible and reversible components of magnetization. The linear dynamic block is realized by a low-pass filter, which takes into account the rate-dependent effects of hysteresis. Temperature dependencies are incorporated into the model by fitting the model parameters as piecewise-linear functions of temperature. A procedure is described for the extraction of a single set of model parameters over the frequency, amplitude, and temperature ranges of interest. The theory is verified experimentally