Crystallization behaviour of Ni-Co-base metallic glasses by isochronal and isothermal annealing

The crystallization behaviour of three amorphous alloys, Co₅₀Ni₂₅Si₁₅B₁₀, Ni₅₀Co₂₅Si₁₅B₁₀ and Ni₅₀Co₂₅P₁₅B₁₀, was studied by means of differential thermal analysis in conjunction with scanning transmission electron microscopy. Isochronal annealing showed a strong dependence of crystallization on scan rate over the range of 1.99 to 20.70 K min^–1. At high Co/Ni ratios, a sequential two-stage crystallization process involving primary MS-I phase followed by MS-II phase precipitation was observed. At low Co/Ni ratios MS-I and MS-II crystallization were concurrent and inseparable. Replacement of the metalloid Si with P as the glass-former dramatically reduced the activation energy for crystallization as well as the crystallization temperature. A mechanistic understanding of these findings was pursued in light of TEM/STEM microanalysis     

A new method of excitation control based on fuzzy set theory

The synthesis of the structure of the power system stabiliser (PSS) and its parametrization are based entirely on methods of linear system theory. Thus the desired effect of the PSS is limited to a bounded area around one system operating point. The use of a controller based on fuzzy set theory introduces an event controlled excitation of the synchronous machine taking into account the power system operation. The desired response of the fuzzy controller is given by a set of rules which are obtained from the limits of the voltage regulator and the undesired performance of the conventional excitation control. A fuzzy controller has been developed for which simulation results are provided. These results support the concept of a fuzzy controller for the purpose of excitation control. They show that a well designed fuzzy controller is superior to a fast excitation control with an additional PSS     

Specimen size effect during tensile testing of an unreinforced polymer

Various specimen sizes of an unreinforced polymer, Hercules 3501 -6 thermosetting epoxy, were subjected to a tensile test. The general specimen geometry was a rectangular dog-bone shape with constant gauge length, but with each specimen size having a different crosssectional area. These cross-sectional areas were obtained by varying the thickness of the epoxy during casting, and the gauge section width during grinding. The resulting failure surfaces of the specimens were observed and photographed using scanning electron microscopy. The results indicate that failure stress, dimensions of the critical flaw which caused failure, and a quantity which is proportional to the fracture toughness, are all correlated with specimen size.     

A storage heat pump using an ‘ozone-friendly’ refrigerant

The paper describes the integration of a chemical and a vapour-compression heat pump for energy storage applications. The vapour-compression system is designed to operate using the UK cheap rate ‘Economy 7’ electricity tariff. The system is characterized thermodynamically using various refrigerant/absorbent pairs in the chemical storage circuit and an ozone-friendly refrigerant, R134a, in the vapour-compression circuit. Results indicate that the H₂O/Na₂S pair provides a high energy storage density and is the most suitable for use in this system. The paper also describes the design features of a domestic-sized version of this heat pump system. Air in the sunspace (conservatory) of a house was used as a heat source for the heat pump.     

STEAM DRYING TECHNOLOGIES: JAPANESE R&D

This report reviews some fundamental and practical aspects of steam drying technologies based mainly on studies published in Japan. Steam drying kinetics, and some industrial technologies particularly for drying of foods, textiles and sludges are reviewed with focus on quality of dried material, drying time, dryer selection and energy recovery from steam dryer exhaust. For energy recovery, heat pump technologies are outlined along with characteristics of different types of steam compressors. A new process is proposed for steam drying; it combines a direct-indirect dryer followed by a direct steam dryer for internal moisture removal.     

Ultralow-Dielectric-Constant foams by crystallisation from supercritical solution: Application to advanced electronic packaging

Accurate moulding of polymer foams of density 0.02–0.3 g cm^?3 has been achieved by crystallising polyethylene and ethylene/methlacrylate copolymers from dry supercritical solutions. Adherent thick films can be sealed to electronic substrates and are proposed as insulating layers for interconnections on multichip modules and other high-speed electronic devices. The dielectric constant achieved for films of several-mil thickness is between 1.05 and 1.3 and can be tailored along with the physical properties of the film by adjusting the density and composition of the copolymer. Planarisation or complex patterning is possible by detailing the mould.     

Pressure indicators for measurements in wind tunnels

The results of an investigation of new materials sensitive to air pressure in a given pressure range are reported. Examples of their application to wind tunnels are given.Central Aero-Hydrodynamics Institute, Moscow. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 63, No. 2, pp. 183–187, August, 1992.     

Prolonged poststrike elevation in tongue-flicking rate with rapid onset in gila monster,Heloderma suspectum: Relation to diet and foraging and implications for evolution of chemosensory searching

Experimental tests showed that poststrike elevation in tongue-flicking rate (PETF) and strike-induced chemosensory searching (SICS) in the gila monster last longer than reported for any other lizard. Based on analysis of numbers of tongue-flicks emitted in 5-min intervals, significant PETF was detected in all intervals up to and including minutes 41–45. Using 10-min intervals, PETF lasted though minutes 46–55. Two of eight individuals continued tongue-flicking throughout the 60 min after biting prey, whereas all individuals ceased tongue-flicking in a control condition after minute 35. The apparent presence of PETF lasting at least an hour in some individuals suggests that there may be important individual differences in duration of PETF. PETF and/or SICS are present in all families of autarchoglossan lizards studied except Cordylidae, the only family lacking linguallly mediated prey chemical discrimination. However, its duration is known to be greater than 2-min only in Helodermatidae and Varanidae, the living representatives of Varanoidea. That prolonged PETF and SICS are typical of snakes provides another character supporting a possible a varanoid ancestry for Serpentes. Analysis of 1-min intervals showed that PETF occurred in the first minute. A review of the literature suggests that a pause in tongue-flicking and delay of searching movements are absent in lizards and the few nonvenomous colubrid snakes tested. The delayed onset of SICS may be a specific adaptation of some viperid snakes to allow potentially dangerous prey to be rendered harmless by venom following voluntary release after envenomation and preceding further physical contact with the prey.     

Multiple access for UWB impulse radio with pseudochaotic time hopping

Pseudochaotic time hopping (PCTH) is a previously proposed encoding/modulation scheme for ultra-wideband (UWB) impulse radio. PCTH exploits concepts from symbolic dynamics to generate aperiodic spreading sequences, resulting in a noise-like spectrum. We present a multiple-access technique suitable for the PCTH scheme. In particular, we provide an analytical expression of the bit-error rate performance as a function of the number of users and validate it by simulation.