Quantitation of amphetamine,methamphetamine, and their methylenedioxy derivatives in urine by solid-phase microextraction coupled with electrospray ionization-high-field asymmetric waveform ion mobility spectrometry-mass spectrometry

Amphetamine, methamphetamine, and their methylenedioxy derivatives have been identified and measured in a human urine matrix using solid-phase microextraction (SPME) and high-field asymmetric waveform ion mobility spectrometry (FAIMS) in combination with electrospray ionization (ESI) and mass spectrometric detection (MS). Limits of detection in human urine between 200 pg/mL and 7.5 ng/mL have been achieved. The use of a simple extraction method, SPME, combined with the high sensitivity and selectivity of ESI-FAIMS-MS eliminates the need for chromatographic separation and allows for very rapid sample processing.     

Tunable diode laser absorption spectroscopy in coiled hollow optical waveguides

We demonstrate tunable diode laser absorption spectroscopy of CO2 and NH3 near 1.5 microm using a distributed feedback diode laser in conjunction with hollow optical waveguides as long-path sample cells. The waveguides are coiled to reduce the physical extent of the system. The small volume of the waveguide provides rapid instrument response to changes in gas concentration. To reduce the pressure drop associated with long lengths and high flow rates, we perforate the waveguides in a novel geometry providing parallel pneumatic paths while maintaining optical path length. A minimum detectable absorbance of 3.5 x 10(-5) in a 3-m section of waveguide is demonstrated.     

The three-dimensional model of Dictyostelium discoideum racE based on the human rhoA-GDP crystal structure

The three-dimensional structure of racE was modeled using several homologous small G proteins, and the best model obtained using the human rhoA as modeling template is reported. The three-dimensional fold of the racE model is remarkably similar to the cellular form of human ras p21 crystal structure. Its secondary structure consists of six alpha-helices, six beta-strands and three 3(10) helices. The model retains its secondary structure after a 300 K, 300 ps molecular dynamics (MD) simulation. Important domains of the protein include its effector loop (residues 34-46), the insertion domain (residues 121-136), and the polybasic motif (between 210 and 220) not modeled in the current structure. The effector loop is inherently flexible and the structure docked with GDP exhibits the effector loop moving significantly closer to the nucleotide binding pocket, forming a tighter complex with the bound GDP. The mobility of the effector loop is conferred by a single residue 'hinge' point at residue 34Asp, also allowing the Switch I region, immediately preceding the effector loop, to be equally mobile. In comparison, the Switch II region shows average mobility. The insertion domain is highly flexible, with the insertion taking the form of a helical domain, with several charged residues forming a complex charged interface over the entire insertion region. While the GDP moiety is loosely held in the active site, the metal cation is extensively co-ordinated. The critical residue 38Thr exhibits high mobility, and is seen interacting directly with the metal ion at a distance of 2.64 A, and indirectly via an intervening water molecule. 64Gln, a key residue involved in GTP hydrolysis in ras, is seen facing the beta-phosphate group and the metal ion. Certain residues (i.e. 51Asn, 38Thr and 65Glu) exhibit unique characteristics and these residues, together with 158Val, may play important roles in the maintenance of the protein's integrity and function. There is strong consensus of secondary structural elements between models generated using various templates, such as h-rac1, h-rhoA and h-cdc42 bound to RhoGDI, all sharing only 50-55% sequence identity with racE, which suggests that this model is in all probability an accurate prediction of the true tertiary structure of racE.     

Simultaneous uptake of anionic surfactants and micellar-solubilized contaminants using anion-exchange resins

This research studied simultaneous uptake of anionic surfactants and micellar-solubilized organic contaminants by anion-exchange resins. Anionic surfactant molecules adsorbed onto the positively charged resin mainly through electrostatic attraction, while the micellar-solubilized contaminants were excluded from aqueous solutions once the remaining micelles could no longer solubilize them. Data suggest that the excess contaminants adsorbed onto the resin skeleton and admicelle layer formed on the resin surface through hydrophobic interactions and eventually partitioned into the resin gel phase matrix. In batch adsorption, the contaminant solubilization capacity did not decrease linearly with respect to surfactant concentration decrease due to the increased solution counterion activity during anion exchange, and caused "delayed" contaminant uptake relative to that of the surfactant. No such effect occurred in continuous column adsorption, where the surfactant and contaminant breakthrough occurred simultaneously. Surfactant head and tail group properties, along with resin structure and particle size significantly affected surfactant and contaminant uptake rates. Relative to recovering the surfactant, the high exchange potential of the anionic surfactant prevented effective surfactant desorption, even at high electrolyte concentration and in the presence of a cosolvent. The resin matrix also had high affinity for the partitioned contaminant, and the contaminant elution from the resin seemed to be controlled by equilibrium partitioning.     

The role of situation assessment and flight experience in pilots' decisions to continue visual flight rules flight into adverse weather

Visual flight rules (VFR) flight into instrument meteorological conditions (IMC) is a major safety hazard in general aviation. In this study we examined pilots' decisions to continue or divert from a VFR flight into IMC during a dynamic simulation of a cross-country flight. Pilots encountered IMC either early or later into the flight, and the amount of time and distance pilots flew into the adverse weather prior to diverting was recorded. Results revealed that pilots who encountered the deteriorating weather earlier in the flight flew longer into the weather prior to diverting and had more optimistic estimates of weather conditions than did pilots who encountered the deteriorating weather later in the flight. Both the time and distance traveled into the weather prior to diverting were negatively correlated with pilots' previous flight experience. These findings suggest that VFR flight into IMC may be attributable, at least in part, to poor situation assessment and experience rather than to motivational judgment that induces risk-taking behavior as more time and effort are invested in a flight. Actual or potential applications of this research include the design of interventions that focus on improving weather evaluation skills in addition to addressing risk-taking attitudes.     

Instrumentation for chemical cytometry

Capillary electrophoresis is ideally suited to chemical analysis of individual cells. Small mammalian somatic cells (approximately 15 microns in diameter) can be analyzed by injecting the intact cell into a capillary, lysing the cell, separating and detecting the cellular components, and reconditioning the capillary prior to the next injection. In this paper, we report on technical improvements to single-cell analysis. We designed an inexpensive multipurpose single-cell injector that facilitates the following: (i) monitoring of injection, (ii) reproducible pressure- or electrokinetic-driven injection of the cell, (iii) complete cell lysis by SDS within 30 s of injection, and (iv) pressure-driven capillary reconditioning. Furthermore, we report on the analysis of glycosylation and glycolysis in single human carcinoma cells (HT29 cell line). The reliability and quality of the analysis is confirmed by comparing electropherograms from single cells and those from purified cell extracts.     

Effects of molecular oxygen on multiphoton-excited photochemical analysis of hydroxyindoles

We have examined the effects of dissolved molecular oxygen on multiphoton-excited (MPE) photochemical derivatization of serotonin (5HT) and related cellular metabolites in various buffer systems and find that oxygen has a profound effect on the formation efficiency of visible-emitting photoproducts. Previously, end-column MPE photoderivatization provided low mass detection limits for capillary electrophoretic analysis of hydroxyindoles, but relied on the use of Good's buffers to generate high-sensitivity visible signal. In the present studies, visible emission from 5HT photoderivatized in different buffers varied by 20-fold under ambient oxygen levels but less than 2-fold in the absence of oxygen; oxygen did not significantly alter the photoproduct excited-state lifetime (approximately 0.8 ns). These results support a model in which oxygen interferes with formation of visible-emitting photoproducts by quenching a reaction intermediate, an effect that can be suppressed by buffer molecules. Deoxygenation of capillary electrophoresis separation buffers improves mass detection limits for 5-hydroxyindoles fractionated in 600-nm channels by approximately 2-fold to < or =30000 molecules and provides new flexibility in identifying separation conditions for resolving 5HT from molecules with similar electrophoretic mobilities, such as the catecholamine neurotransmitters.     

Occurrence and load of selected herbicides and metabolites in the lower Mississippi River

Analyses of water samples collected from the Mississippi River at Baton Rouge, Louisiana, during 1991-1997 indicate that hundreds of metric tons of herbicides and herbicide metabolites are being discharged annually to the Gulf of Mexico. Atrazine, metolachlor, and the ethane-sulfonic acid metabolite of alachlor (alachlor ESA) were the most frequently detected herbicides and, in general, were present in the largest concentrations. Almost 80% of the annual herbicide load to the Gulf of Mexico occurred during the growing season from May to August. The concentrations and loads of alachlor in the Mississippi River decreased dramatically after 1993 in response to decreased use in the basin. In contrast, the concentrations and loads of acetochlor increased after 1994, reflecting its role as a replacement for alachlor. The peak annual herbicide load occurred in 1993, when approximately 640 metric tons (t) of atrazine, 320 t of cyanazine, 215 t of metolachlor, 53 t of simazine, and 50 t of alachlor were discharged to the Gulf of Mexico. The annual loads of atrazine and cyanazine were generally 1-2% of the amount annually applied in the Mississippi River drainage basin; the annual loads of acetochlor, alachlor, and metolachlor were generally less than 1%. Despite a reduction in atrazine use, historical data do not indicate a long-term downward trend in the atrazine load to the Gulf of Mexico. Although a relation (r2 = 0.62) exists between the atrazine load and stream discharge during May to August, variations in herbicide use and rainfall patterns within subbasins can have a large effect on herbicide loads in the Mississippi River Basin and probably explain a large part of the annual variation in atrazine load to the Gulf of Mexico.     

Multidrug-resistant Salmonella Typhimurium DT104 in poultry

Salmonella Typhimurium isolates from feed ingredients or poultry sources isolated during 1995 to 1997 from different geographical locations within Minnesota were examined for the presence of Salmonella Typhimurium definitive type 104 (DT104). Antibiotic susceptibility studies indicated that 15 of 50 isolates of Salmonella Typhimurium had an antibiotic resistance pattern (ampicillin, chloramphenicol, streptomycin, sulfonamides, and tetracycline) that is usually observed with multidrug-resistant Salmonella Typhimurium DT104. Of the 15 isolates showing the antibiotic resistance pattern, 8 isolates were phage type 104, 3 isolates were typed as phage type 104 complex, and the remaining 4 isolates belonged to phage types 193, 81, and 126. DT104 was recovered from both feed ingredients and poultry samples. Of the seven feed ingredient-associated Salmonella Typhimurium isolates, four were DT104, whereas only 7 of 43 poultry-associated Salmonella Typhimurium isolates were DT104. A repetitive sequence-based polymerase chain reaction (rep-PCR) of 50 isolates of Salmonella Typhimurium representing 13 phage types identified seven distinct fingerprint profiles. No correlation between phage type and rep-PCR type was noticed. Eleven Salmonella Typhimurium isolates belonging to DT104 and its complex were grouped into two closely related rep-PCR types.