浅谈南水北调中线S13标渠道机械化衬砌施工技术

南水北调渠道混凝土衬砌,由于其工程等级属于Ⅰ等,总干渠渠道为Ⅰ级建筑物,且渠底宽度较大,边坡坡度较缓,衬砌分缝较多,无论从资源投入、工效还是工程质量达到设计要求都有相当大的难度,渠道衬砌机施工技术正好解决这个难题,实现了机械化作业,值得在南水北调中线工程渠道施工中推广和应用.     

Oxides Catalysts of Rare Earth and Transient Metal for Catalytic Oxidation of Benzene

The catalysts of CeO2 and the mixture of CeO2 and CuO were prepared, and the activities of these catalysts for completely oxidizing benzene were studied.The results show that the optimal proportion of CeO2/CuO is 6: 4.The highest temperature at which benzene was completely oxidized on these catalysts at different airspeed was measured.Compared these catalysts with the noble metal used, our catalysts had superiority in the resources and the industrial cost besides good activities.     

复合布尔函数中含某单乘积项的快速判定算法

引入了布尔函数的基本积、单乘积项等概念，通过实例剖析了复合布尔函数中是否含某一单乘积项的一般判定方法，在该基础上提出了一种快速判定途径，并给出了快速判定算法的具体描述，同时对算法进行了实验，结果表明该算法快速有效。     

非透视3点问题的解析解

由于在机器人导航等领域新的图像装置不符合透视规则,无法运用传统的透视位置估计方法,采用吴氏零点分解方法,给出非透视3点问题的解析解.利用新图像装置的几何条件,建立了非透视3点方程系统.     

智能磁流变(RM)阻尼器的实验研究

磁流变 (MR)液是一种新型的智能材料 ,而MR阻尼器具有在外加电流作用下快速可逆地改变阻尼特性的特点。本文针对所作的MR阻尼器实验研究 ,介绍了实验过程及相关数据 ,并对其进行了分析。实验表明 :MR阻尼器具有良好的阻尼可控制特性 ,是结构消能减振控制的理想元件。     

海水介质中高活性镁合金负极的电化学性能

研制了一种新型镁合金负极材料；用电化学方法测定了镁合金负极在人造海水介质中的电化学性能，用浸泡法测定了材料在人造海水介质中的自腐蚀速度，用扫描电子显微镜观察了镁合金腐蚀后的表面形貌，并与AP65合金和纯镁进行了比较。结果表明，新研制的镁合金在人造海水介质中的开路电位增加，自腐蚀速度降低，稳定工作电位提高，电极表面腐蚀均匀，可开发用于高电性能电池的负极材料。     

蒸汽发生器二次侧清洁度的视频检查

立式平管板Ｕ形管束的压水堆核电站蒸汽发生器安装至瞬变工况期间，管板上表面的铁基金属残余物的堆积和外来物的存在，以及商业运行后管板、传热管、管子支撑板等的低流速区域里沉积物的堆积要求进行蒸汽发生器的清洁度检查。介绍了蒸汽发生器二次侧清洁度的视频检查技术。该技术适用于蒸汽发生器安装至瞬变工况和投入商业运行后可能发生污染的各阶段的清洁度检查。     

辨识时变系统遗忘因子算法的收敛性分析

著名的递推遗忘因子算法（ＲＦＦＡ）可以用辨识时变系统参数，具有良好的跟踪性能，本文借助于随机过程理论分析了ＲＦＦＡ的收敛性和稳定性，给出了参数跟踪误差的上下界。     

复合果胶酶加工番石榴果汁的工艺优化

采用法国产的复合液态果胶酶加工番石榴果汁。研究结果表明,最佳工艺条件为:每千克番石榴果浆加入20mL浓度为0.01mL/mL的复合液态果胶酶、pH为3.5、45℃下恒温酶解5￣6h。使用不同的澄清剂对番石榴果汁进行澄清,结果表明,加浓度为0.5%的明胶溶液20mL/kg果汁中的效果最佳。番石榴果汁,保持了原有果实的营养成分和保健功能,有独特的风味。     

Microstructure and Mechanical Properties of Heat-treated GeSb_2Te_4 Thin Films

The effect of annealing on microstructure,adhesive and frictional properties of GeSb 2 Te 4 films were experimentally studied.The GeSb 2 Te 4 films were prepared by radio frequency(RF)magnetron sputtering,and annealed at 200℃and 340℃under vacuum circumstance,respectively.The adhesion and friction experiments were mainly conducted with a lateral force microscope(LFM)for the GeSb 2 Te 4 thin films before and after annealing.Their morphology and phase structure were analyzed by using atomic force microscopy(AFM)and X-ray Diffraction(XRD)techniques,and the nanoindention was employed to evaluate their hardness values.Moreover,an electric force microscope(EFM)was used to measure the surface potential. It is found that the deposited GeSb 2 Te 4 thin film undergoes an amorphous-to-fcc and fcc-to-hex structure transition;the adhesion has a weaker dependence on the surface roughness,but a certain correlation with the surface potential of GeSb 2 Te 4 thin films.And the friction behavior of GeSb 2 Te 4 thin films follows their adhesion behavior under a lower applied load.However,such a relation is replaced by the mechanical behavior when the load is relatively higher.Moreover,the GeSb 2 Te 4 thin film annealed at 340℃presents a lubricative property.