Shrinkage cracking of styrene butadiene polymeric emulsion‐modified concrete using rapid‐hardening cement

This study was performed to resolve the problem of cracks caused by the rapid hydration heat produced during the early setting stages of rapid‐hardening cement. To address the hydration heat of rapid‐hardening cement, we prepared a modified rapid‐hardening cement using calcium sulfoaluminate clinker combined with a styrene butadiene (SB) polymer. The performance of SB polymeric emulsion‐modified concrete made from modified rapid‐hardening cement was assessed by determining shrinkage (change in length, and plastic and autogenous shrinkage). The modified rapid‐hardening cement in combination with SB polymeric emulsion effectively reduced cracking. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Structural evolution during crystallization in phase separated Ti–Y–Al–Co metallic glass

Structural evolution during heat treatment of melt spun Ti₃₆Y₂₀Al₂₄Co₂₀ alloy was studied using differential scanning calorimetry, X-ray diffractometry and transmission electron microscopy. The as-melt spun Ti₃₆Y₂₀Al₂₄Co₂₀ specimen showed a hierarchical complex microstructure consisting of Ti-rich and Y-rich amorphous phases and crystallized with two-step process. Crystallization in the phase separated two phase mixture took place in a confined mode due to different thermal stability and complex microstructure, resulting in various nano-scaled microstructural formation ranging from fine distribution of crystalline particles in amorphous matrix to fine distribution of amorphous particles in crystalline matrix.     

Authentication and correction of digital watermarking images

A novel function for image watermarking is introduced. The proposed function gives a restoration/correction capability to image watermarking as well as the detection and localisation of alterations. The basic idea of the proposed watermarking technique is to adopt conventional error control coding techniques for generating a watermark.     

Journalists’ Evaluation of the South Korean Government's Crisis Management in the Cheonan Incident

The purpose of this study was to examine how journalists judge and react to the withholding of information by the government during a national crisis. This article analyses the case of the sinking of the Cheonan, which killed four South Korean marines and sparked extreme tension throughout the Korean peninsula. For this research, in‐depth interviews were conducted with journalists who reported on the Cheonan incident. All participants (11 journalists) believed that the South Korean government withheld information about the cause of the Cheonan sinking for a period of time. Half of the journalists did not agree with the governmental restrictive information policy, while the other half accepted this as the government acting in the best interest of national security in a crisis situation.     

Estimation of the common cause failure probabilities on the component group with mixed testing scheme

This paper presents a method to estimate the common cause failure (CCF) probabilities on the common cause component group (CCCG) with mixed testing schemes such as the train level mixed testing scheme or the alternate periodic testing scheme. In the train level mixed testing scheme, the components are tested in a non-staggered way within the same train, but the components are tested in a staggered way between the trains. The alternate periodic testing scheme indicates that all components in the same CCCG are tested in a non-staggered way during the planned maintenance period, but they are tested in a staggered way during normal plant operation. Since the CCF probabilities are dependent on the testing schemes such as staggered testing or non-staggered testing, CCF estimators have two kinds of formulas in accordance with the testing schemes. Thus, there are general formulas to estimate the CCF probability on the staggered testing scheme and non-staggered testing scheme. However, in real plant operation, there are many CCCGs with specific mixed testing schemes. Recently, Barros (Barros et al., 2009) and Kang (Kang et al., 2009) proposed a CCF factor estimation method to reflect the alternate periodic testing scheme and the train level mixed testing scheme. In this paper, a general formula which is applicable to both the alternate periodic testing scheme and the train level mixed testing scheme was derived.     

Synthesis of nano-sized biphasic calcium phosphate ceramics with spherical shape by flame spray pyrolysis

Nanometer size biphasic calcium phosphate (BCP) powders with various Ca/P molar ratios satisfied with appropriate phase ratios of HA/β-TCP were prepared by high temperature flame spray pyrolysis process. The BCP powders had spherical shapes and narrow size distributions irrespective of the ratios of Ca/P. The mean size of the BCP powders measured from the TEM image was 38 nm. The composition ratio of Ca/P was controlled from 1.500 to 1.723 in the spray solution, and required phase ratios of HA/TCP are controlled systematically. The calcium dissolution of the pellets obtained from the BCP powders directly prepared by flame spray pyrolysis in buffer solution increased with the decrease of Ca/P ratios except with the Ca/P ratio of 1.713. The pellet surface with Ca/P ratio of 1.500, which consisted of β-TCP, was eroded dramatically for 7 days. On the other hand, the pellet surface with Ca/P ratio of 1.667 was stable and did not disintegrate after immersion in Tris–HCl buffer solution based on the SEM observation.     

Edible oxygen barrier bilayer film pouches from corn zein and soy protein isolate for olive oil packaging

An edible oxygen barrier film pouch was fabricated from a heat sealable corn zein (CZ) layer laminated on soy protein isolate (SPI) film and used to package olive oil condiments for use with instant noodles. The mechanical, barrier, and physical properties of the CZ/SPI bilayer films were then investigated and the oxidative stability of olive oil in the pouches was measured during storage under dry and intermediate relative humidity conditions. When compared to the SPI film, lamination with an additional layer of CZ film led to increased tensile strength and water barrier properties, while it had a lower elongation at break and decreased oxygen barrier properties. Nevertheless, the oxygen permeability of the CZ/SPI film (0.81 × 10⁻¹⁸ m³ m/m² s Pa) was lower than that of nylon-metalocene catalyzed linear low-density polyethylene (NY/mLLDPE) film (3.51 × 10⁻¹⁸ m³ m/m² s Pa) which is the material usually used for such condiments. The CZ/SPI bilayer films generated here were heat sealable at 120-130 °C and produced a seal strength greater than 300 N/m. The higher oxygen barrier property of the CZ/SPI bilayer films resulted in reduced oxidative rancidity of olive oil packaged in the CZ/SPI film when compared to olive oil packaged in NY/mLLDPE films.     

Utility accrual real-time scheduling for multiprocessor embedded systems

We present the first Utility Accrual (or UA) real-time scheduling algorithm for multiprocessors, called the global Multiprocessor Utility Accrual scheduling algorithm (or gMUA). The algorithm considers an application model where real-time activities are subject to time/utility function time constraints, variable execution time demands, and resource overloads where the total activity utilization demand exceeds the total capacity of all processors. We consider the scheduling objective of (1) probabilistically satisfying lower bounds on each activity’s maximum utility, and (2) maximizing the system-wide, total accrued utility. We establish several properties of gMUA including optimal total utility (for a special case), conditions under which individual activity utility lower bounds are satisfied, a lower bound on system-wide total accrued utility, and bounded sensitivity for assurances to variations in execution time demand estimates. Finally, our simulation experiments validate our analytical results and confirm the algorithm’s effectiveness.     

Synthesis and nonlinear optical properties of a novel polyurethane containing cyanovinylthiophene with enhanced thermal stability of dipole alignment for electro‐optic applications

Stabilization of electrically induced dipole alignment is one of the important criteria in the development of nonlinear optical (NLO) polymers for electro‐optic device applications. Polyurethanes for NLO applications have attracted attention because of their high thermal stability due to hydrogen bonding. In the work reported here, we designed and synthesized a new type of NLO polyurethane, in which the pendant NLO chromophores are part of the polymer backbone. This mid‐type NLO polymer is expected to have the merits of both main‐chain and side‐chain NLO polymers, namely stable dipole alignment and good solubility. 1‐[3,4‐Di‐(2‐hydroxyethoxy)phenyl]‐2‐(2‐thienyl)ethene was prepared and condensed with 3,3′‐dimethoxy‐4,4′‐biphenylenediisocyanate to yield a polyurethane. This polyurethane was reacted with tetracyanoethylene to give a novel Y‐type polyurethane (7) containing 1‐(3,4‐dioxyphenyl)‐2‐[5‐(1,2,2‐tricyanovinyl)‐2‐thienyl]ethenes as NLO chromophores, which constitute part of the polymer backbone. Polyurethane 7 is soluble in common organic solvents such as N,N‐dimethylformamide and dimethylsulfoxide. It shows a thermal stability up to 280 °C from thermogravimetric analysis with a glass transition temperature obtained from differential scanning calorimetry of ca 162 °C. The second harmonic generation (SHG) coefficient (d₃₃) of a poled polymer film of he polyurethane at 1560 nm fundamental wavelength is ca 1.11 × 10^?18 C. Polymer 7 exhibits an enhanced thermal stability and no significant SHG decay is observed below 150 °C, which is acceptable for NLO device applications. Copyright © 2009 Society of Chemical Industry