IMPROVEMENT OF TYPE IV CRACKING RESISTANCE OF 9Cr HEAT RESISTING STEEL WELDMENT BY BORON ADDITION

Creep lives of high Cr ferritic heat resisting steel weldments decrease due to Type Ⅳ fracture, which occurs as a result of formation and growth of creep voids and cracks on grain boundaries in fine-grained heat affected zone (HAZ). Because boron is considered to suppress the coarsening of grain boundary precipitates and growth of creep voids, we have investigated the effect of boron addition on the creep properties of 9Cr steel weldments. Four kinds of 9Cr3WSCoVNb steels with boron content varying from 4.7×10-5 to 1.8×10-4 and with nitrogen as low as 2.0×10-5 were prepared. The steel plates were welded by gas tungsten arc welding and crept at 923K. It was found that the microstructures of HAZ were quite different from those of conventional high Cr steels such as P91 and P92, namely the fine-grained HAZ did not exist in the present steel weldments. Boron addition also has the effect to suppress coarsening of grain boundary carbides in HAZ during creep. As a result of these phenomena, the welded join     

Hand shape classification in various pronation angles using a wearable wrist contour sensor

Hand gestures are potentially useful for communications between humans and between a human and a machine. However, existing methods entail several problems for practical use. We have proposed an approach to hand shape recognition based on wrist contour measurement. Especially in this paper, two assignments are addressed. First is the development of a new sensing device in which all elements are installed in a wrist-watch-type device. Second is the development of a new hand shape classifier that can accommodate pronation angle changes. The developed sensing device enables wrist contour data collection under conditions in which the pronation angle varies. The classifier recognizes the hand shape based on statistics produced through data forming and statistics conversion processes. The most important result is that no large difference exists between classification rates that include or those that exclude the independent (preliminary) pronation estimation process using inertia measurement units. This result shows two possible insights: (1) the wrist contour has some features that depend on the hand shape but which do not depend on the pronation angle, or (2) the wrist contour potentially includes pronation angle variation information. These insights indicate the possibility that hand shape can be recognized solely from the wrist contour, even while changing the pronation angle.     

Teaching materials to enhance the visual expression of Web pages for students not in art or design majors

The explosive growth of the Internet has made the knowledge and skills for creating Web pages into general subjects that all students should learn. It is now common to teach the technical side of the production of Web pages and many teaching materials have been developed. However teaching the aesthetic side of Web page design has been neglected, and students not in art or design majors are normally confronted with difficulties when they do expressive design of Web pages.     

Quantitative structural analysis of twin boundary in alpha-Zn7Sb2O12 using HAADF STEM method

The structure and composition of the 1/4{110} twin boundary in alpha-Zn7Sb2O12 have been determined by using quantitative high-angle annular dark field scanning transmission electron microscopy (HAADF STEM) analysis. The noise in the experimental HAADF STEM images is reduced by using the maximum entropy method and average processing, and the parameters used in dynamical simulations are experimentally determined. From the analysis, it has been found that octahedral sites in the twin boundary slightly shift parallel to the [110] direction, and a reduction of the Sb concentration at the octahedral sites on the plane adjacent to the twin boundary was detected. The reduction was measured from three regions in the same twin boundary, and the Sb concentrations were 4 +/- 3, 8 +/- 3 and 19 +/-2 at% from 33 at%.     

Observation of three-dimensional elemental distributions of a Si device using a 360 degrees -tilt FIB and the cold field-emission STEM system

A technique for preparation of a pillar-shaped specimen and its multidirectional observation using a combination of a scanning transmission electron microscope (STEM) and a focused ion beam (FIB) instrument has been developed. The system employs an FIB/STEM compatible holder with a specially designed tilt mechanism, which allows the specimen to be tilted through 360 degrees [T. Yaguchi, M. Konno, T. Kamino, T. Hashimoto, T. Ohnishi, K. Umemura, K. Asayama, Microsc. Microanal. 9 (Suppl. 2) (2003) 118; T. Yaguchi, M. Konno, T. Kamino, T. Hashimoto, T. Ohnishi, M. Watanabe, Microsc. Microanal. 10 (Suppl. 2) (2004) 1030]. This technique was applied to obtain the three-dimensional (3D) elemental distributions around a contact plug of a Si device used in a 90-nm technology. A specimen containing only one contact plug was prepared in the shape of a pillar with a diameter of 200nm and a length of 5mum. Elemental maps were obtained from the pillar specimen using a 200-kV cold-field emission gun (FEG) STEM model HD-2300C equipped with the EDAX genesis X-ray energy-dispersive spectrometry (XEDS) system through a spectrum imaging technique. In this study, elemental distributions of minor elements with weak signals were enhanced by applying principal component analysis (PCA), which is a superior technique to extract weak signals from a large dataset. The distributions of elements, especially the metallization component Ti and minor dopant As in this particular device, were successfully extracted by PCA. Finally, the 3D elemental distributions around the contact plug could be visualized by reconstruction from the tilt series of maps.     

Magnetic order and evolution of the electronic state aroundx=0.12 in La2?xBaxCuO4 and La2?xSrxCuO4

Muon spin rotation ( ⁺SR) measurement provides clear evidence of the antiferromagnetic order of Cu moments below 35 K for La_2–x Ba _x CuO₄ and below 15 K for La_2–x Sr _x CuO₄ in the narrow range ofx where the high-T _c superconductivity (SC) is suppressed remarkably. The results suggest that the change of the electronic state coupled with the lattice instability is relevant to the local suppression of SC and freezing of spin fluctuations of the Cu moment.     

Hot isostatic pressing of tetragonal ZrO2 solid-solution powders prepared from acetylacetonates in the system ZrO2-Y2O3-Al2O3

In compositions having ZrO₂/Y₂O₃=(74.25–71.25)/(0.75–3.75) (mol% ratio) with 25 mol% Al₂O₃, metastable t-ZrO₂ solid solutions crystallize at 780° to 860°C from amorphous materials prepared by the simultaneous hydrolysis of zirconium, yttrium and aluminium acetylacetonates. Hot isostatic pressing has been performed for 1 h at 1130 and 1230°C under 196 MPa using their powders. Two kinds of material are fabricated: (i) perfect ZrO₂ solid-solution ceramics and (ii) composites of ZrO₂ solid solution and -Al₂O₃. Their mechanical properties are examined, in connection with microstructures and t/m ZrO₂ ratios. Composites with a homogeneous dispersed -Al₂O₃ derived from solid-solution ceramics result in a remarkable increase of strength.     

Reduction of higher harmonic sequences in terminal voltage of an AC exciting synchronous generator using magnetically anisotropic slot wedges

This paper describes relationships between characteristics of a magnetically anisotropic slot wedge and voltage higher harmonics in an ac exciting synchronous generator terminal due to permeance ripple caused by an open-slot-type rotor. From the relationships obtained, practical guidelines were formulated for machine designs applying the magnetically anisotropic slot wedge. The results are as follows.

• 1 (1) Equivalent permeability of the magnetically anisotropic slot wedge became isotropic wedge permeability for air-gap flux ripple.
• 2 (2) Two ways were identified to reduce voltage-higher harmonics by using the slot wedges.
• 3 (3) The level of leakage flux passing through the anisotropic slot wedge was determined only by its permeability in the width direction.
• 4 (4) Effectiveness of the magnetic anisotropic slot wedges inserted into the stator slots was verified from experimental results using a model machine of the open- slot-type rotor.