Improvement of carrier diffusion length in silicon nanowire arrays using atomic layer deposition

To achieve a high-efficiency silicon nanowire (SiNW) solar cell, surface passivation technique is very important because a SiNW array has a large surface area. We successfully prepared by atomic layer deposition (ALD) high-quality aluminum oxide (Al₂O₃) film for passivation on the whole surface of the SiNW arrays. The minority carrier lifetime of the Al₂O₃-depositedSiNW arrays with bulk silicon substrate was improved to 27 μs at the optimum annealing condition. To remove the effect of bulk silicon, the effective diffusion length of minority carriers in the SiNW array was estimated by simple equations and a device simulator. As a result, it was revealed that the effective diffusion length in the SiNW arrays increased from 3.25 to 13.5 μm by depositing Al₂O₃ and post-annealing at 400°C. This improvement of the diffusion length is very important for application to solar cells, and Al₂O₃ deposited by ALD is a promising passivation material for a structure with high aspect ratio such as SiNW arrays.     

Surfactant effects on hydrate formation in an unstirred gas/liquid system: An experimental study using HFC-32 and sodium dodecyl sulfate

This paper deals with the effects of a surfactant additive on the formation of a clathrate hydrate in a quiescent guest-gas/liquid-water system. The paper first presents our strong suspicion against the existing hypothesis that the surfactant-micelle formation in the liquid-water phase promotes the hydrate formation. It is pointed out that the Krafft point for sodium dodecyl sulfate (SDS), a popular anionic surfactant often used in previous hydrate-forming experiments, is presumably higher than the system temperatures set in these experiments and hence that no micelles may have formed in these experiments. The paper then describes our experimental observations of the hydrate formation from a hydrofluorocarbon gas, HFC-32 (CH₂F₂), to show how the hydrate formation behavior is affected by the addition of SDS to the water when brought into contact with HFC-32. In each experiment, HFC-32 gas was continuously supplied to a rectangular chamber partially filled with a quiescent pool of water (pure water or an aqueous SDS solution) to compensate for the gas consumption due to the hydrate formation, thereby maintaining a constant pressure inside the chamber. The present experiments featured the following characteristics: (a) detailed visual observations along horizontal axes through large side windows in the test chamber, and (b) surface tension measurements of the aqueous SDS solutions with the aid of a pendant-drop device inserted in the same chamber to determine the SDS-in-water solubility, which seems to have been misunderstood as the critical micelle concentration (CMC) in some previous studies, under the hydrate-forming conditions. The former revealed that the addition of SDS to the pool-forming water results in the formation of thick, highly porous hydrate layers not only on the liquid-pool surface but also on the chamber walls above the level of the pool surface, leaving the bulk of the liquid pool free from hydrate crystals. The latter led to an important finding that the SDS concentration at which the rate of the hydrate formation peaks is slightly lower than the solubility (the false CMC). An excessive addition of SDS beyond the solubility was found to cause a decrease in the rate of hydrate formation but an increase in the final level of the water-to-hydrate conversion.     

Orientation and Grain Boundary Microstructure of Alumina in Al/Al2O3 Composites Produced by Reactive Metal Penetration

The orientation and grain boundary microstructure of alumina in reactive metal penetration Al/Al₂O₃ composites are studied using orientation imaging microscopy and the results are compared with those of sintered polycrystalline Al₂O₃. The interconnected Al₂O₃ in the composite material is separated by Σ3 boundaries (twins) with a 60° rotation around the [0001] direction. A high frequency (∼100%) of Σ3 coincidence boundaries in composite alumina is remarkable since only ∼12% of boundaries in a sintered polycrystalline Al₂O₃ are of special nature. The coincidence boundaries in the in situ alumina grow in a coherent and faceted manner.     

Gas diffusion electrodes for polymer electrolyte fuel cells using novel organic/inorganic hybrid electrolytes: effect of carbon black addition in the catalyst layer

We have prepared novel gas diffusion electrodes for polymer electrolyte fuel cells (PEFC) using new organic/inorganic hybrid electrolytes. The catalyst layers were prepared by mixing 3-(trihydroxysilyl)-1-propanesulfonic acid [(THS)Pro-SO₃H], 1,8-bis(triethoxysilyl) octane (TES-Oct), Pt loaded carbon black (Pt-CB) and water, followed by a sol-gel reaction. It was found that addition of uncatalyzed carbon black (u-CB) into the cathode catalyst layer enhanced the performance at high current density region, due to an increase in the gas diffusion rate. The optimum volume ratio of u-CB/Pt-CB was found to be 0.1, at which the gas diffusivity and the catalyst utilization are well balanced.     

Magnesium Modified β-Tricalcium Phosphate Induces Cell Osteogenic Differentiation In Vitro and Bone Regeneration In Vivo

In vitro, in vivo, and clinical studies have shown how the physicochemical and biological properties of β-tricalcium phosphate (β-TCP) work in bone regeneration. This study aimed to improve the properties of β-TCP by achieving optimum surface and bulk β-TCP chemical/physical properties through the hydrothermal addition of magnesium (Mg) and to later establish the biocompatibility of β-TCP/Mg for bone grafting and tissue engineering treatments. Multiple in vitro and in vivo analyses were used to complete β-TCP/Mg physicochemical and biological characterization. The addition of MgO brought about a modest rise in the number of β-TCP surface particles, indicating improvements in alkaline phosphatase (ALP) activity on day 21 (p < 0.05) and in the WST-1assay on all days (p < 0.05), with a corresponding increase in the upregulation of ALP and bone sialoprotein. SEM analyses stated that the surfaces of the β-TCP particles were not altered after the addition of Mg. Micro-CT and histomorphometric analysis from rabbit calvaria critical defects resulted in β-TCP/Mg managing to reform more new bone than the control defects and β-TCP control at 2, 6, and 8 weeks (* p ≤ 0.05, ** p ≤ 0.01, *** p ≤ 0.001, and **** p ≤ 0.0001). The hydrothermal addition of MgO to the β-TCP surfaces ameliorated its biocompatibility without altering its surface roughness resulting from the elemental composition while enhancing cell viability and proliferation, inducing more bone regeneration by osteoconduction in vivo and osteoblastic differentiation in vitro.     

Applications of analytical electron microscopy to guide the design of boron carbide

Compositional analysis of boron carbide on nanometer length scales to examine or interpret atomic mechanisms, for example, solid-state amorphization or grain-boundary segregation, is challenging. This work reviews advancements in high-resolution microanalysis to characterize multiple generations of boron carbide. First, ζ-factor microanalysis will be introduced as a powerful (scanning) transmission electron microscopy ((S)TEM) analytical framework to accurately characterize boron carbide. Three case studies involving the application of ζ-factor microanalysis will then be presented: (1) accurate stoichiometry determination of B-doped boron carbide using ζ-factor microanalysis and electron energy loss spectroscopy, (2) normalized quantification of silicon grain-boundary segregation in Si-doped boron carbide, and (3) calibration of a scanning electron microscope X-ray energy-dispersive spectroscopy (XEDS) system to measure compositional homogeneity differences of B/Si-doped arc-melted boron carbides in the as-melted and annealed conditions. Overall, the improvement and application of advanced analytical tools have helped better understand processing–microstructure–property relationships and successfully manufacture high-performance ceramics.     

Correlations of Hepatic Hemodynamics,Liver Function,and Fibrosis Markers in Nonalcoholic Fatty Liver Disease: Comparison with Chronic Hepatitis Related to Hepatitis C Virus

The progression of chronic liver disease differs by etiology. The aim of this study was to elucidate the difference in disease progression between chronic hepatitis C (CHC) and nonalcoholic fatty liver disease (NAFLD) by means of fibrosis markers, liver function, and hepatic tissue blood flow (TBF). Xenon computed tomography (Xe-CT) was performed in 139 patients with NAFLD and 152 patients with CHC (including liver cirrhosis (LC)). The cutoff values for fibrosis markers were compared between NAFLD and CHC, and correlations between hepatic TBF and liver function tests were examined at each fibrosis stage. The cutoff values for detection of the advanced fibrosis stage were lower in NAFLD than in CHC. Although portal venous TBF (PVTBF) correlated with liver function tests, PVTBF in initial LC caused by nonalcoholic steatohepatitis (NASH-LC) was significantly lower than that in hepatitis C virus (C-LC) (p = 0.014). Conversely, the liver function tests in NASH-LC were higher than those in C-LC (p < 0.05). It is important to recognize the difference between NAFLD and CHC. We concluded that changes in hepatic blood flow occurred during the earliest stage of hepatic fibrosis in patients with NAFLD; therefore, patients with NAFLD need to be followed carefully.     

Identification of Sex Pheromones of Anadevidia peponis and Macdunnoughia confusa and Field Tests of Their Role in Reproductive Isolation of Closely Related Plusiinae Moths

Anadevidia peponis and Macdunnoughia confusa are defoliators of plants in the family Cucurbitaceae and Compositae, respectively, in Japan. GC-MS analyses of crude pheromone gland extracts treated with or without dimethyl disulfide indicated that females of A. peponis produced six monoene acetates and two monoene alcohols and that M. confusa females produced five monoene acetates. These components include (Z)-7-dodecenyl acetate as a major common constituent and three other acetates as minor common constituents. The minor constituents are quite different in blend composition. In addition, with (Z)-7-dodecenyl acetate, an indispensable component for male attraction is (Z)-5-decenyl acetate for A. peponis and (Z)-9-tetradecenyl acetate is essential for M. confusa. Field tests with synthetic lures showed synergistic effects of some other minor components and male attraction of three additional Plusiinae species, Macdunnoughia purissima, Ctenoplusia albostriata, and Chrysodeixis eriosoma, suggesting their reproductive isolation is based in part on pheromonal communication.     

Nitrous oxide emissions from fertilized upland fields in Thailand

Nitrous oxide (N₂O) emission from fertilized maize fields was measured using a closed chamber at four experimental sites in Thailand. The average measured N₂O flux from unfertilized plots through crop season was 4.16 ± 1.52, 5.05 ± 1.65, 5.25 ± 1.68 and 6.74 ± 2.95 g N₂O-N m^-2 h^-1, at Nakhon Sawan, Phra Phutthabat, Khon Kaen and Chiang Mai, respectively. Increased N₂O emissions by the application of nitrogen fertilizer were 0.22–0.44, 0.19–0.38%, 0.12–0.24 and 0.08–0.15% of the applied N, respectively. Compared to other data, N₂O emission rate to applied nitrogen was not significantly different between the data of Thailand and the Temperate Zone.     

Production of eicosapentaenoic acid by a recombinant marine cyanobacterium, Synechococcus sp.

The eicosapentaenoic acid (EPA) synthesis gene cluster from an EPA-producing bacterium, Shewanella sp. SCRC-2738, was cloned into a broad-host range vector, pJRD215, and then introduced into a marine cyanobacterium, Synechococcus sp. NKBG15041c, by conjugation. The transconjugant cyanobacteria produced 3.7±0.2% (2.24±0.13 mg/L) EPA (n-3) and 2.5 ±0.2% (1.49±0.06 mg/L) eicosatetraenoic acid (n-3) of the total fatty acids when the cells were cultured at 23°C at a light intensity of 1,000–1,500 Lux. The EPA and eico-satetraenoic acid contents of the cells were increased to 4.6±0.6% (3.86±1.11 mg/L) and 4.7±0.3% (3.86±0.82 mg/L), and 7.5±0.3% (1.76±0.10 mg/L) and 5.1±0.2% (1.19±0.06 mg/L) when they were cultured at low temperature (18°C) and at lower light intensity (40 Lux), respectively.