Fully automatic welding of thick-walled pressure vessels by the narrow gap subarc process

The demands for welding of thick-walled pressure vessels are very stringent. The cost of repairing a weld defect deep down in a weld joint could be very high. As submerged arc welding is considered to be a reliable process for both the welding of pressure vessels and other demanding applications, ESAB chose this process when developing their narrow gap welding technique. This two-pass narrow gap process is described together with the welding and control equipment. The welding results using two types of agglomerated fluxes are presented.     

Facile modifications of polyimide via chloromethylation: II. Synthesis and characterization of thermocurable transparent polyimide having methylene acrylate side groups

From chloromethylated polyimide, a useful starting material for modification of aromatic polyimides, a thermocurable transparent polyimide having acrylate side groups was prepared. In the presence of 1,8‐diazabicyclo[5,4,0]undec‐7‐ene, chloromethylated polyimide was esterified with acrylic acid to synthesize poly(imide methylene acrylate). The polymer was soluble in organic solvent, which makes it possible to prepare a planar film by spin coating. The polymer film became insoluble after thermal treatment at 230 °C for 30 min. Optical transparency of the film at 400 nm (for 1 µm thickness) was higher than 98 % and not affected by further heating at 230 °C for 250 min. Adhesion properties measured by the ASTM D3359‐B method ranged from 4B to 5B. Preliminary results of planarization testing showed a high degree of planarization (DOP) value (>0.53). These properties demonstrate that poly(imide methylene acrylate) could be utilized as a thermocurable transparent material in fabricating display devices such as TFT‐LCD. Copyright © 2004 Society of Chemical Industry     

Disc filtration for separation of flocs from a moving bed bio-film reactor.

A Discfilter with 10 and 18 microm filter openings, respectively, was placed in parallel to a flotation plant for separation of biological flocs from a post-denitrifying Kaldnes Moving Bed Process, the last treatment step at the municipal wastewater treatment plant at Sj?unda, Malm?, Sweden. The effluent concentrations from the 10 and 18 microm filter were 2-5 and 2-8 mg SS L(-1), respectively, which is comparable to, or better than, the flotation plant. Comparison with experiences from activated sludge plants shows that the Discfilter works especially well after the Kaldnes process. Particle size distribution (PSD) studies show that particles larger than the filter openings of 10 and 18 microm are separated with approximately 90% efficiency, whereas most of the smaller particles pass the filter. This fact indicates that the major particle separation mechanism is physical blocking. These findings point to the possibility of improving the prediction of the separation efficiency by combining measurements of turbidity and suspended solids with particle size analysis.     

Experimental Study of Ice Jam Thickening under Dynamic Flow Conditions

River ice jams are a common occurrence on northern rivers, and their formation can present a severe flood risk to nearby communities. As more and more river regulation projects are developed to provide an alternative to fossil fuels for electrical power-generating capacity, our need to understand the mechanisms associated with ice jam formation under variable flow conditions becomes more vital. This is because, at present, hydropeaking operations are often severely curtailed during the ice-affected seasons due to concerns that sudden flow fluctuations might instigate ice jams and associated flooding. Here, an experimental investigation explores the effects of rapid increases in discharge on ice jam formation and evolution. It is found that the thickness of ice jams formed under highly dynamic flow conditions tend to be slightly thinner than those formed during steady carrier flows for comparable discharges. Also, despite the highly dynamic nature of these consolidation events, the resulting ice thicknesses appear reasonably well approximated by steady flow theory.     

Reliability and performance analysis of time – space – time switching networks with multiple separated space switches

Since electronic switching systems usually require very strict reliability requirements as well as good performance objectives, we need to jointly analyse the performance and reliability of switching systems. In this paper, we compare conventional time–space–time switches with single space switches with those with multiple separated space switches, from the viewpoints of reliability and performance. We consider time–space–time switching networks which consist of N incoming time switches, i.e. one NxN space switch, two (N/2)x(N/2) space switches, and four (N/4)x(N/4) space switches. We introduce a Markov reliability model to study the effect of failures and analyse the reliability and performance of three different types of switching networks in terms of average blocking probability and the mean time to unreliable operation, as we vary the offered traffic. As a result, T–S–T switching networks with multiple separated space switches exhibit better performance and reliability than those with single space switches.     

A fast algorithm for the generalized parametric minimum cut problem and applications

Many combinatorial optimization problems are solved by a sequence of network flow computations on a network whose edge capacities are given as a function of a parameter λ. Recently Galloet al. [7] made a major advance in solving such parametric flow problems. They showed that for an important class of networks, calledmonotone parametric flow networks, a sequence ofO(n) flow computations could be solved in the same worst-case time bound as a single flow. However, these results require one of two special assumptions: either that the λ values are presented in increasing or decreasing order; or that the edge capacity functions are affine functions of λ. In this paper we show how to remove both of these assumptions while obtaining the same running times as in [7]. This observation generalizes and unifies the two major results of [7], and allows its ideas to be applied to many new combinatorial problems. Of greatest importance, it allows the efficient application of binary search and successive binary search to a sequence of network flow problems.     

Cellular UDP-glucose deficiency caused by a single point mutation in the UDP-glucose pyrophosphorylase gene

We previously isolated a mutant cell that is the only mammalian cell reported to have a persistently low level of UDP-glucose. In this work we obtained a spontaneous revertant whose UDP-glucose level lies between those found in the wild type and the mutant cell. The activity of UDP-glucose pyrophosphorylase (UDPG:PP), the enzyme that catalyzes the formation of UDP-glucose, was in the mutant 4% and in the revertant 56% of the activity found in the wild type cell. Sequence analysis of UDPG: PP cDNAs from the mutant cell showed one missense mutation, which changes amino acid residue 115 from glycine to aspartic acid. The substituted glycine is located within the largest stretch of strictly conserved residues among eukaryotic UDPG:PPs. The analysis of the cDNAs from the revertant cell indicated the presence of an equimolar mixture of the wild type and the mutated mRNAs, suggesting that the mutation has reverted in only one of the alleles. In summary, we demonstrate that the G115D substitution in the Chinese hamster UDPG:PP dramatically impairs its enzymatic activity, thereby causing cellular UDP-glucose deficiency.     

Conformational stability of factor VIIa: biophysical studies of thermal and guanidine hydrochloride-induced denaturation

The binding of the multidomain protein factor VIIa (fVIIa) to tissue factor provides the interprotein communication necessary to make fVIIa an efficient catalyst of the initial event in the extrinsic pathway of blood coagulation. We have investigated the stability of individual domains in fVIIa and the influence of Ca2+ and an irreversible active-site inhibitor (FFR-chloromethyl ketone). Equilibrium guanidine hydrochloride (GuHCl)-induced unfolding monitored by tryptophan fluorescence and far-UV circular dichroism (CD) demonstrated that the gamma-carboxyglutamic acid (Gla) domain unfolds at 0.3 M GuHCl and the serine protease (SP) domain at 3 M GuHCl and that Ca2+ is a prerequisite for the formation of an ordered, compact structure in the Gla domain. The loss of amidolytic activity coincides with the first transition, which is stabilized by the active-site inhibitor, and a change in the environment of the active site is demonstrated using a fluorescent inhibitor (DEGR-chloromethyl ketone). Thermal unfolding monitored by differential scanning calorimetry (DSC) reveals that Ca2+ stabilizes the SP domain slightly, increasing the unfolding temperature by 2.7 degrees C. In addition, Ca2+ is required for a large enthalpy change concomitant with unfolding of the Gla domain, and this unfolding enthalpy is only detectable in the presence of the SP domain, indicating some kind of interaction between these domains. Thermal unfolding measured by CD indicates secondary structural changes at the same temperature as the heat absorption in the DSC but only when both the Gla domain and the SP domain are present together with Ca2+ ions. Taken together, these results indicate a Ca2+-dependent interaction between the Gla domain and the SP domain, implying a high degree of flexibility of the domains in free fVIIa. It is also shown that the epidermal growth factor-like domains are stable at elevated temperatures and high GuHCl concentrations. Moreover, already at physiological temperature, subtle structural changes take place which influence the overall shape of fVIIa and are detrimental to its enzymatic activity.     

基于Web的重点建设项目管理系统

为提高重点建设项目的管理水平和工作效率,在详细分析重点建设项目的业务流程和用户需求的基础上,提出基于Web的重点建设项目信息管理系统。该系统采用典型的三层体系架构,具有较强的可扩展性和灵活性。通过该系统对重点建设项目信息科学管理,可以有效克服传统管理方式的弊端,极大地提高重点建设项目信息管理工作的效率。