Foam‐Mat Freeze‐Drying of Bifidobacterium longum RO175: Viability and Refrigerated Storage Stability

Foaming as a pretreatment was used prior to freeze‐drying of Bifidobacterium longum RO175 to investigate the potential acceleration of the drying rate and increase in microorganism viability after the process. A study on storage of foamed and nonfoamed freeze‐dried products at 4 °C completed this study. B. longum RO175 in foamed medium could be freeze‐dried in 1/7 to 1/4 of the time required for nonfoamed suspensions. In addition, foamed suspensions presented higher viability immediately after freeze‐drying (13.6% compared to 12.81 % or 11.46%, depending on the cryoprotective media). Refrigerated storage led to a reduction in B. longum RO175 viability for all tested protective agents (foamed and nonfoamed). No correlation between glass transition temperature and stability of probiotic powders was observed during storage. In addition, lower viability after 56 d of storage was observed for foamed materials, probably due to foam porous structure and higher hygroscopicity, and oxygen presence and moisture pickup during storage.     

Influence of the crack morphology on the fatigue crack growth rate: A continuously-kinked crack model based on fractals

Threshold condition and rate of fatigue crack growth appear to be significantly affected by the degree of deflection of cracks. In the present paper, the reduction of the fatigue crack growth rate for a so-called ‘periodically-kinked crack’ as compared to that for a straight counterpart is quantified via the Paris–Erdogan law modified according to some simple theoretical arguments. It is shown that such a reduction increases as the value of the kinking angle increases. Then, a so-called ‘continuously-kinked crack’ (the kink length tends to zero) is considered and modelled as a self-similar invasive fractal curve. The sequence of kinking angles in the crack is such that the fatigue crack path is ‘on average’ straight. Using the Richardson’s expression for self-similar fractals, the fractal dimension of the crack is expressed as a function of the kinking angle. It is shown that the fatigue crack growth rate in the Paris range depends not only on the above fractal dimension and in turn on the kinking angle, but also, in an explicit fashion, on the crack length. Some experimental results related to concrete and showing a crack size effect on the fatigue crack growth rate are analysed.     

Spoilage microbiota associated to the storage of raw meat in different conditions

The spoilage of raw meat is mainly due to undesired microbial development in meat during storage. The type of bacteria and their loads depend on the initial meat contamination and on the specific storage conditions that can influence the development of different spoilage-related microbial populations thus affecting the type and rate of the spoilage process. This review focuses on the composition of raw meat spoilage microbiota and the influence of storage conditions such as temperature, packaging atmosphere and use of different preservatives on the bacterial diversity developing in raw meat. In addition, the most recent tools used for the detection and identification of meat microbiota are also reviewed.     

Physicochemical,thermal and sorption properties of nutritionally differentiated flours and starches

The aims of this work were to analyze physicochemical and thermal properties of ahipa and cassava flours and starches and to determine their water sorption isotherms and thermodynamic properties. Both flours are naturally gluten-free products, obtained by relatively simple procedures (grating or slicing). Ahipa flour gelatinized at lower temperature than cassava, indicating a better aptitude for cooking. Gelatinization temperatures of flours were higher than those of their starches. Water holding capacity of ahipa flours was significantly higher than those of cassava, leading the slicing process the highest values. Sorption isotherms were determined at 10, 20 and 30 °C. Experimental data were satisfactorily fitted using different mathematical models. Thermodynamic parameters associated with water adsorption process were calculated from GAB model, as well as the monolayer water content. All samples could be considered as products with an acceptable stability.     

Application of a novel microwave plasma treatment for the sintering of nickel oxide coatings for use in dye-sensitized solar cells

In this study the use of microwave plasma sintering of nickel oxide (NiO_x) particles for use as p-type photoelectrode coatings in dye-sensitized solar cells (DSSCs) is investigated. NiO_x was chosen as the photocathode for this application due to its stability, wide band gap and p-type nature. For high light conversion efficiency DSSCs require a mesoporous structure exhibiting a high surface area. This can be achieved by sintering particles of NiO_x onto a conductive substrate. In this study the use of both 2.45 GHz microwave plasma and conventional furnace sintering were compared for the sintering of the NiO_x particles. Coatings 1 to 2.5 μm thick were obtained from the sintered particles (mean particle size of 50 nm) on 3 mm thick fluorine-doped tin oxide (FTO) coated glass substrates. Both the furnace and microwave plasma sintering treatments were carried out at ~ 450 °C over a 5 min period. Dye sensitization was carried out using Erythrosin B and the UV–vis absorption spectra of the NiO_x coatings were compared. A 44% increase in the level of dye adsorption was obtained for the microwave plasma sintered samples as compared to that obtained through furnace treatments. While the photovoltaic performance of the DSSC fabricated using the microwave plasma treated NiO_x coatings exhibited a tenfold increase in the conversion efficiency in comparison to the furnace treated samples. This enhanced performance was associated with the difference in the mesoporous structure of the sintered NiO_x coatings.     

Reducing the Gas Pressure Drop in Suction Mufflers of Hermetic Reciprocating Compressors

The suction muffler of hermetic reciprocating compressors is installed in order to attenuate the noise generated by the gas pulsation of the flow through the suction valve. However, the installation of the suction muffler affects the operation of the compressor owing to gas pressure drop, which causes volumetric and energetic efficiency loss due to the gas specific volume augmentation. Therefore, there is a compromise between sound attenuation and pressure drop increase, which has to be taken into account by compressor designers. In this work, it presents a numerical solution to the flow through a suction muffler in order to analyze the pressure field and point out the main contributions to the overall pressure drop of the flow. A commercial CFD （computational fluid dynamics） code was used to perform the numerical simulations and the results were validated by using experimental data. After analyzing the pressure field, the geometry of the muffler was modified intending to decrease the flow pressure drop. The geometric modification produced a 28% reduction on the overall pressure drop, without influencing the sound attenuation.     

β-Glucan administration to diabetic rats reestablishes redox balance and stimulates cellular pro-survival mechanisms

The mechanisms underlying the beneficial effect observed in diabetic rats after treatment with a commercially available β-glucan-enriched extract (BGEE) were examined. Multiple low-dose streptozotocin (STZ) diabetes was used (40 mg STZ/kg) as a model for type 1 diabetes. BGEE was administered daily (80 mg/kg) for 4 weeks, starting from the last day of the STZ treatment. In vitro and in vivo experiments suggest that significant free radical scavenging and antioxidant activities of BGEE were responsible for a systemic adjustment of the redox disturbance and reduction of DNA damage in the liver and kidney of diabetic rats. BGEE-treated diabetic rats also displayed increased Akt kinase activity and decreased pro-caspase-3 degradation, implying that BGEE mediates its beneficial effects through activation of the cellular pro-survival pathway. We conclude that β-glucan administration under diabetic conditions promotes a systemic improvement that can be expected to increase the organism’s resistance to the onset of diabetic complications.