Comparison of antimicrobial resistance of Campylobacter jejuni and Campylobacter coli isolated from humans and chicken carcasses in Poland

Campylobacter-associated gastroenteritis remains an important cause of morbidity worldwide, and some evidence suggests that poultry is an important source of this foodborne infection in humans. This study was conducted to analyze the prevalence and genetic background of resistance of 149 Campylobacter jejuni and 54 Campylobacter coli strains isolated from broiler chicken carcasses and from stool samples of infected children in Poland from 2003 through 2005. Nearly all isolates were susceptible to macrolides and aminoglycosides. The highest resistance in both human and chicken strains was observed for ciprofloxacin (more than 40%), followed by ampicillin (13 to 21%), and tetracycline (8 to 29%). Resistance to ampicillin and tetracycline rose significantly between 2003 and 2005. Slight differences in resistance between human and chicken isolates indicate that although chicken meat is not the only source of Campylobacter infection in our population, it can be involved in the transmission of drug-resistant Campylobacter strains to humans.     

The effect of freezing on the hot air and microwave vacuum drying kinetics and texture of whole cranberries

Abstract

The aim of this study was to evaluate the effect of convective and cryogenic freezing, hot air convective drying (HACD) at 60, 70, 80, and 90?°C and microwave vacuum drying (MWVD) at 100, 150, 200, 300, 450, and 500?W on the drying kinetics and texture of whole cranberries. Effective moisture diffusivities and drying rates were higher, whereas drying times were shorter for the samples dried by MWVD compared with the samples processed by HACD. The drying kinetics of cranberries during MWVD was discussed based on the hypothesis postulating that changes in the drying rate of cranberries during MWVD can be explained by and correlated with changes in the pressure gradient on material surface. Cranberries processed by MWVD were characterized by significantly greater hardness, gumminess, and chewiness in comparison with HACD samples. MWVD was found to be an effective method for producing dried snacks characterized by hard and crispy texture and considerable resistance to stress associated with manufacturing, packaging, storage, and delivery. HACD produced brittle fruit that were difficult to store and transport and were not fully suitable for direct consumption. Convective freezing before MWVD improved the overall appearance of cranberries, whereas cryogenic freezing combined with high temperature HACD adversely influenced the drying rate and produced dried cranberries with suboptimal overall appearance.     

Effect of filler size on thermophysical and electrical behavior of nanocomposites based on expanded graphite nanoparticles filled in low‐density polyethylene matrix

Various aspects of electrical and thermophysical properties of nanocomposites based on low‐density polyethylene matrix filled with nanostructuralized expanded graphite (EG) and standard, microsized graphite are presented in this article. A periodical method developed in the laboratory was used to measure simultaneously thermal conductivity, specific heat, and diffusivity of composites at room temperature. The effect of micro‐ and nanosized fillers on the final thermophysical and electrical behavior is investigated. It was found that the electrical conductivity of composites strongly depends not only on the filler content but also on the filler size. When the microsized graphite was used, the percolation concentration of the filler was found to be 15 vol%, whereas the percolation concentration of the filler in nanocomposites filled with EG of large sizes was significantly lower. Similarly, it was shown that the graphite significantly improves the thermophysical behavior of composites filled with micro‐ and nanofiller sizes. The thermal conductivity measured values were also compared with some theoretical models for the prediction of the thermal conductivity. POLYM. COMPOS., 2012. © 2013 Society of Plastics Engineers     

Application of modified montmorillonite for desulfurization during the combustion of hard coal

Series of modified with vanadium, cobalt, nickel, manganese and copper montmorillonite were compared as additives for desulfurization during combustion of hard coal. Samples of coal with added montmorillonite were subject to a 2 h a flow reactor in the air atmosphere, at 1173 K. The weight ratio of montmorillonite:coal was 1:500. Changes in sulfur dioxide contents in flue gasses caused by the additive were investigated by means of an exhaust gas analyzer. During the co-combustion of coal with montmorillonite modified with vanadium was removed 58-84% of SO₂ from flue gasses. Application of Co and Ni led to a reduction in SO₂ emissions by 35-53% and 83-90%, respectively. For additions of Ni, Cu and Mn was observed to reduce emissions of SO₂ by 60-73%. As a result of using diversified preparatory procedures on montmorillonite additives DESOX obtained were materials with different physicochemical properties. Sulfate forms obtained after the combustion process with addition of montmorillonite additives are amorphous and very well dispersed.     

Characterization of the surface layers formed on titanium by plasma electrolytic oxidation

This paper is concerned with the surface modification of titanium by the PEO method (plasma electrolytic oxidation) in the solutions which contain Ca, P, Si and Na. The chemical composition of the thus formed surface layers was examined by XPS and EDS. The morphology of the surface was observed by SEM. The phase composition was determined by X-ray diffraction (XRD). The adhesive strength of the oxide layers was evaluated by the scratch-test. The corrosion resistance was determined in a simulated body fluid (SBF) at a temperature of 37 °C by electrochemical methods for various exposure times.The oxide layers obtained were porous and enriched with Ca, P, Si and Na and their properties depended on the electrolyte solution and the parameters of the oxidation process. The results of the electrochemical examinations show that the surface modification by PEO does not worsen the corrosion resistance of titanium after a 13 h exposure in SBF. The electrochemical impedance spectroscopy (EIS) results indicate that the surface layers have a complex structure and that their electric properties undergo changes during long-term exposures in SBF.     

A comparative study on the electrical and mechanical behaviour of multi‐walled carbon nanotube composites prepared by diluting a masterbatch with various types of polypropylenes

Polypropylene (PP) nanocomposites with multi‐walled carbon nanotubes (CNT) were produced by a small‐scale masterbatch melt dilution technique using five PP differing in melt flow index (MFI) and degree of maleination. PP used in a masterbatch has MFI = 12 (PP₁₂), the others used PP which have MFI = 2 or MFI = 8. The state of CNT dispersion as assessed by melt rheological and morphological investigations indicated a better dispersion when using unmodified PP with MFI = 8 (PP₈) and the masterbatch's PP₁₂. Electrical conductivity results showed nanotube percolation at contents between 1.1 and 2.0 vol %, whereas lower values were obtained for the matrices with the best dispersion, i.e., PP₈ and PP₁₂. The dependencies of the relative Young's modulus on the CNT content showed that the maleinization improved the interfacial interactions between the components, especially in the case of maleated PP with MFI = 8 (PP‐MA₈), but the better dispersion was prevented by the incompatibility between polar groups of PP‐MA and the nonpolar origin masterbatch PP₁₂. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Bimetallic Au–Cu, Ag–Cu/CrAl3O6 Catalysts for Methanol Synthesis

The influence of silver and gold addition on the activity and physicochemical properties of supported Cu/CrAl₃O₆ catalysts was the aim of this work. The reduction of CrAl₃O₆ support shows only one reduction stage attributed to Cr (VI) species reduction originating from previously oxidized binary oxide. Supported copper catalysts reduce in one or two stages depending on copper concentration representing the reduction of copper oxide—CuO, copper oxide chemically combined with Cr(III) oxide as copper chromite—CuCr₂O₄ and Cr(VI) species originating from surface chromate ions CrO₄ ^2?. Additionally, the introduction of silver into supported copper catalysts Cu/CrAl₃O₆ can led to the appearance of silver chromate phase. XRD investigations of support CrAl₃O₆ alone, supported copper and gold and silver promoted copper supported catalysts calcined at 400, 700 and 900 °C indicated the presence of highly amorphous alumina γ-Al₂O₃ like structure network in which some of cationic locations of aluminum were occupied by chromium atoms and small quantities of α-Cr₂O₃ phase. Additionally, for copper, silver–copper, and gold–copper supported catalysts the following oxide phases were distinguished: monometallic oxides CuO, Ag₂O, binary oxides CuAl₂O₄, Ag₂CrO₄, CuCr₂O₄ and even ternary oxide CuAlCrO₄. In the case of gold promoted copper supported catalysts metallic gold phase was detected. Activity tests carried out for these catalysts show that the most active was 20 wt.% Cu/CrAl₃O₆ catalyst. Promotion of copper catalysts by silver improves the activity in methanol synthesis, what can be assigned to silver chromate formation. The analogical gold chromate like formation was not confirmed.     

Control of structural and flow properties of ceramic mixtures using aqueous emulsion of cutting liquid waste

The possibility of using an aqueous emulsion of cutting liquid waste in the production of construction ceramics is determined. The effect of CL waste on the structural and flow (molding) properties and the energy consumed in the molding of clay and ceramic mixtures based on Kiev spondyl clay is studied.