Highly efficient CuO incorporated TiO2 nanotube photocatalyst for hydrogen production from water

Highly dispersed CuO was introduced into TiO₂ nanotube (TNT) made by hydrothermal method via adsorption-calcination process or wet impregnation process, to fabricate CuO incorporated TNT photocatalysts (CuO-TNT) for hydrogen production. It was found that CuO-TNT possessed excellent hydrogen generation activity, which was constantly vigorous throughout 5 h reaction. Depending on the preparation method, hydrogen evolution rates over CuO-TNT were founded in the range of 64.2-71.6 mmol h⁻¹ g⁻¹_catalyst, which was much higher than the benchmark P25 based photocatalysts, and even superior to some Pt/Ni incorporated TNT. This high photocatalytic activity of CuO-TNT was mainly attributed to the unique 1-D tubular structure, large BET surface area and high dispersion of copper component. Compared to wet impregnation, adsorption-calcination process was superior to produce active photocatalyst, since it was prone to produce photocatalyst with more highly dispersed CuO.     

Effects of electrical stimulation on early postmortem muscle pH and temperature declines in pigs from different genetic lines and halothane genotypes

The objective of this study was to determine if electrical stimulation (ES) early postmortem is an effective method to generate PSE-like meat. One hundred and thirty-eight gilts (85-125 kg) from heavy muscled (HM), normal muscled (NM), and light muscled (LM) porcine genetic lines were subjected to one of two treatments: ES (26 pulses of 500 V, 60 Hz) at 3 min postmortem or non-stimulated (NS). Pigs from HM line were further characterized as halothane (HAL) carriers (Nn) or non-carriers (NN). ES carcasses had lower (P<0.0001) pH values and higher (P<0.0001) temperature than NS carcasses during the first 56 min postmortem. ES carcasses had lower (P<0.0001) a*-values, and color and firmness scores, as well as higher (P<0.0001) drip loss and L*-values. No significant interactions were found between treatment and genetic line or HAL gene status with regard to pH, temperature, or quality characteristics. Temperature and pH declines within the first hour postmortem were not affected by genetic line, but slight (P<0.01) quality differences were observed. Nn and NN did not differ in pH or temperature within the first hour postmortem, but Nn carcasses had lower (P<0.01) color and firmness scores, and higher (P<0.05) drip loss. These results show that ES early postmortem is an effective method for simulating PSE development in pigs of different muscling and HAL gene status, and suggest that pH and temperature decline alone cannot explain all aspects of pork quality.     

Cationic Micelles Modulated in the Presence of α,ω-Alkanediols: A SANS,NMR and Conductometric Study

The solution behavior of a typical cationic surfactant, tetradecyltrimethylammonium bromide, in mixed solvent systems composed of water and varying concentrations of α,ω-alkanediols; 1,2-ethanediol (ED), 1,4-butanediol (BD), 1,6-hexanediol (HD) and 1,8-octanediol (OD) was examined via electrical conductance measurements, ¹³C-NMR spectroscopy and small angle neutron scattering (SANS) measurements. The critical micelle concentration (CMC) values and degree of counterion dissociation (α) indicate that both ED and BD oppose micellization, whereas HD and OD enhance micelle formation. Changes in the ¹³C-NMR chemical shifts (∆δ values) reveal that the short chain diols reside almost exclusively in the bulk phase and hence, affect the formation of micelles by altering the solvent properties in the bulk of the solution, whereas HD and OD partition between the pseudomicellar phase and the bulk phase. SANS studies indicated that both the micellar size and aggregation number (N _agg) decrease in the presence of all diols. ED and BD behave like cosolvents and increase the α and CMC values and decrease N _agg. We note that the effect of HD and OD on the properties of the micelles is concentration dependent; at low concentrations, these diols interact with the micelles and behave as cosurfactants (as evidenced by the trends in the micellar properties), while at higher concentrations, they enhance the surfactant solubility and behave as a cosolvent.     

Runoff of pyrethroid insecticides from concrete surfaces following simulated and natural rainfalls

Intensive residential use of insecticides has resulted in their ubiquitous presence as contaminants in urban surface streams. For pest eradication, urban hard surfaces such as concrete are often directly treated with pesticides, and wind/water can also carry pesticides onto hard surfaces from surrounding areas. This study expanded on previous bench-scale studies by considering pesticide runoff caused by irrigation under dry weather conditions and rain during the wet season, and evaluated the effects of pesticide residence time on concrete, single versus recurring precipitations, precipitation intensity, and concrete surface conditions, on pesticide transferability to runoff water. Runoff from concrete 1 d after pesticide treatment contained high levels of bifenthrin (82 μg/L) and permethrin (5143 μg/L for cis and 5518 μg/L for trans), indicating the importance of preventing water contact on concrete after pesticide treatments. Although the runoff transferability quickly decreased as the pesticide residence time on concrete increased, detectable residues were still found in runoff water after 3 months (89 d) exposure to hot and dry summer conditions. ANOVA analysis showed that precipitation intensities and concrete surface conditions (i.e., acid wash, silicone seal, stamping, and addition of microsilica) did not significantly affect the pesticide transferability to runoff. For concrete slabs subjected to natural rainfalls during the winter wet season, pesticide levels in the runoff decreased as the time interval between pesticide application and the rain event increased. However, bifenthrin and permethrin were still detected at 0.15-0.17 and 0.75-1.15 μg/L in the rain runoff after 7 months (221 d) from the initial treatment. In addition, pesticide concentrations showed no decrease between the two rainfall events, suggesting that concrete surfaces contaminated by pesticides may act as a reservoir for pesticide residues, leading to sustained urban runoff contamination.     

Impact of sulfate pollution on anaerobic biogeochemical cycles in a wetland sediment

The impact of sulfate pollution is increasingly being seen as an issue in the management of inland aquatic ecosystems. In this study we use sediment slurry experiments to explore the addition of sulfate, with or without added carbon, on the anaerobic biogeochemical cycles in a wetland sediment that previously had not been exposed to high levels of sulfate. Specifically we looked at the cycling of S (sulfate, dissolved and particulate sulfide - the latter measured as acid volatile sulfide; AVS), C (carbon dioxide, bicarbonate, methane and the short chain volatile fatty acids formate, acetate, butyrate and propionate), N (dinitrogen, ammonium, nitrate and nitrite) and redox active metals (Fe(II) and Mn(II)). Sulfate had the largest effects on the cycling of S and C. All the added S at lower loadings were converted to AVS over the course of the experiment (30 days). At the highest loading (8 mmol) less than 50% of consumed S was converted to AVS, however this is believed to be a kinetic effect. Although sulfate reduction was occurring in sediments with added sulfate, dissolved sulfide concentrations remained low throughout the study. Sulfate addition affected methanogenesis. In the absence of added carbon, addition of sulfate, even at a loading of 1 mmol, resulted in a halving of methane formation. The initial rate of formation of methane was not affected by sulfate if additional carbon was added to the sediment. However, there was evidence for anaerobic methane oxidation in those sediments with added sulfate and carbon, but not in those sediments treated only with carbon. Surprisingly, sulfate addition had little apparent impact on N dynamics; previous studies have shown that sulfide can inhibit denitrification and stimulate dissimilatory nitrate reduction to ammonia. We propose that because most of the reduced sulfur was in particulate form, levels of dissolved sulfide were too low to interfere with the N cycle.     

Early-life maternal separation and social isolation produce an increase in impulsive action but not impulsive choice.

Early life environment, events, and context, such as mother–offspring relationship, can have profound effects on future behavior and physiology. We investigated the effects of long-term maternal and social separation, through artificial rearing, on adult impulsivity. Rats were maternally reared (MR) or artificially reared (AR) and half of the AR rats were provided with replacement somatosensory stimulation intended to simulate maternal licking. There are at least 2 forms of impulsivity and we compared rats on 1 test of impulsive action (differential reinforcement of low rates of responding—DRL-20s) and 2 tests of impulsive choice (delay discounting and fixed consecutive number schedule—FCN). We found that AR rats are more action impulsive; however, this effect can be reduced by maternal licking-like stimulation. In contrast, AR rats did not display an increase in impulsive choice. Overall, these experiments show that early life maternal and social separation have different effects on the 2 forms of impulsivity. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Strengths, strengths overused, and lopsided leadership.

Riding the growth of positive psychology, strengths-based development has become a popular approach to helping managers become better leaders. This school of thought advises managers to maximize their natural talents rather than try to correct weaknesses. This article takes issue with this advice and considers how it can, ironically, lead managers to turn their strengths into weaknesses through overuse as well as cause them to neglect shortcomings that can degrade the performance of employees, teams, and organizations. Hypotheses are developed about the relationship between specific personal strengths and leadership behaviors as well as the joint tendencies to overdo behaviors related to one's strengths while underdoing opposing but complementary behaviors. Strong support was found for the tendency of managers to do too much of the behaviors related to their strengths and more modest support was found for the tendency of managers to do too little of opposing but complementary behaviors. The implications of these findings are discussed in terms of future research needs and how to apply the strengths approach in a way that minimizes downside risk in developmental applications. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Corrosion of high purity Mg, Mg2Zn0.2Mn, ZE41 and AZ91 in Hank’s solution at 37 °C

The CO₂ partial pressure required to maintain a synthetic body fluid (SBF) at a constant pH, based on the initial bicarbonate concentration, was evaluated to be 0.013 atm for Hank’s solution and 0.083 atm for SBF27. Corrosion of high purity Mg and three Mg alloys in Hank’s solution was studied using hydrogen evolution, weight loss and Tafel extrapolation. The solution pH was maintained constant by CO₂. There was initially an incubation period with a low corrosion rate, a period of increasing corrosion rate, and subsequently steady state corrosion. Some hydrogen dissolved in the Mg metal.     

Structure-function studies of an engineered scaffold protein derived from Stefin A. II: Development and applications of the SQT variant

Constrained binding peptides (peptide aptamers) may serve as tools to explore protein conformations and disrupt protein-protein interactions. The quality of the protein scaffold, by which the binding peptide is constrained and presented, is of crucial importance. SQT (Stefin A Quadruple Mutant-Tracy) is our most recent development in the Stefin A-derived scaffold series. Stefin A naturally uses three surfaces to interact with its targets. SQT tolerates peptide insertions at all three positions. Peptide aptamers in the SQT scaffold can be expressed in bacterial, yeast and human cells, and displayed as a fusion to truncated pIII on phage. Peptides that bind to CDK2 can show improved binding in protein microarrays when presented by the SQT scaffold. Yeast two-hybrid libraries have been screened for binders to the POZ domain of BCL-6 and to a peptide derived from PBP2', specific to methicillin-resistant Staphylococcus aureus. Presentation of the Noxa BH3 helix by SQT allows specific interaction with Mcl-1 in human cells. Together, our results show that Stefin A-derived scaffolds, including SQT, can be used for a variety of applications in cellular and molecular biology. We will henceforth refer to Stefin A-derived engineered proteins as Scannins.     

Broadband scattering of the solar spectrum by spherical metal nanoparticles

Metal nanoparticles offer the possibility of improved light trapping in solar cells, but careful design is required to maximise scattering and minimise parasitic absorption across the wavelength range of interest. We present an analysis of the broadband scattering and absorption characteristics of spherical metal nanoparticles, optimized for either crystalline silicon (c‐Si) or amorphous silicon (a‐Si:H) solar cells. A random two‐dimensional array of optimally sized Ag spheres can scatter over 97% of the AM1.5 spectrum from 400 to 1100 nm. Larger particles are required for c‐Si devices than a‐Si:H due to the increased spectral range, with optimum particle sizes ranging from 60 nm for a‐Si:H to 116 nm for c‐Si. Positioning the particles at the rear of the solar cell decreases absorption losses because these principally occur at short wavelengths. Increasing the refractive index of the surrounding medium beyond the optimum value, which is 1.0 for a‐Si:H and 1.6 for c‐Si, shifts absorption to longer wavelengths and decreases scattering at short wavelengths. Ag nanoparticles scatter more of the solar spectrum than Au, Cu or Al nanoparticles. Of these other metals, Al can only be considered for a‐Si:H applications due to high absorption in the near‐infrared, whereas Au and Cu can only be considered for the rear of c‐Si devices due to high absorption in the ultraviolet (UV) and visible. In general, we demonstrate the importance of considering the broadband optical properties of metal nanoparticles for photovoltaic applications. Copyright © 2012 John Wiley & Sons, Ltd.