In Situ Performance Testing of Deteriorating Water Tanks for Durability Assessment

Reports of failure of existing concrete structures due to a lack of durability, rather than a deficiency in structural strength, has made concrete technologists, engineers, and researchers focus research on the parameters influencing durability performance with respect to time. Systematic performance monitoring, with respect to chosen durability parameters of existing concrete structures, will decide the direction of future research in this area. Inferences based on laboratory simulations and testing need to be confirmed by in situ field measurements and studies. In situ condition rating and performance monitoring surveys have been conducted by many researchers, scientists, and professional associations, and reported in literature. Inferences of few such studies are summarized and discussed. Deterioration of concrete structures constructed in recent times is observed at relatively faster rates, and has been mainly attributed to cracking. Cracking is associated with the use of faster-hydrating portland cements with increased fineness and the tricalcium silicate (C3S) content to support the high speed of modern construction. In the present research, a case study of deteriorated water tank structures situated in the semitropical region of India is presented. Some selected parameters—such as concrete cover, carbonation depth, chloride concentration, compressive strength, etc. which influence long term durability of structures—have been measured.     

Solution synthesis of crystallized AMO4 (A=Ba, Sr, Ca; M=W, Mo) film at room temperature

A well-crystallized AMO₄ (A=Ba, Ca, Sr; M=W, Mo) films have been prepared at room temperature through a simple solution reaction in respective alkaline solution at higher pH ranging from 12–14. Adopting the corrosion principle for oxidation of metal substrate, these double oxide films were carried out in presence of chemical driving force without any special apparatus or devices. Hydrogen peroxide was used to enhance the dissolution rate of metal substrates. The driving force for the film formation and growth were high concentration of A²⁺, MO₄²⁻ ions with high pH conditions. Average grain sizes of 8–10 μm with bipyramidal shaped particle were grown to the thickness of about 10–14 μm after 3–6 hours treatment. The crystallization of AMO₄ was characterized by three-dimensional nucleation. This work demonstrates the possibility of fabrication of functional ceramic films directly from the aqueous solution in a single step by solution reactions.     

Reaction of zirconium fluoride glass with water: kinetics of dissolution

When liquid water contacts a zirconium-barium-lanthanum fluoride glass, at least three different processes occur. Barium and zirconium fluoride dissolve into the water, water penetrates into the glass, and zirconium fluoride crystals grow on the glass surface, in static solution. The rate of dissolution, as measured by solution analysis, is possibly controlled by diffusion in the solid surface; surface blockage and surface reactions are other possible kinetic steps involved. Diffusion in solution is not the controlling mechanism. Hydrogen profiles in the glass surface suggest that the penetration rate of water into the glass is controlled by diffusion and a surface reaction.     

Pad effects on material-removal rate in chemical-mechanical planarization

The role of a porous pad in controlling material-removal rate (MRR) during the chemical-mechanical planarization (CMP) process has been studied numerically. The numerical results are used to develop a phenomenological model that correlates the forces on each individual abrasive particle to the applied nominal pressure. The model provides a physical explanation for the experimentally observed domains of pressure-dependent MRR, where the pad deformation controls the load sharing between active-abrasive particles and direct pad-wafer contact. The predicted correlations between MRR and slurry characteristics, i.e., particle size and concentration, are in agreement with experimentally measured trends reported by Ouma¹ and Izumitani.²     

Photostability of polyetherurethaneureas

Polyetherurethaneureas (PEUUs) were synthesised from polyethylene-glycols (PEGs) of molecular weight 400, 600 and 1000, 4,4′-diphenylmethanediisocyanate (MDI) and aliphatic diamine chain extenders, 1,3-propanediamine (PDA) and 1,6-hexanediamine (HDA). Polymer films were irradiated with 365 nm light at 293 K and the effects of polyether soft segment length and urea hard segment on photo-oxidative stability were studied by following the variation in weight-average molecular weight (M _w), gel formation and stress-strain properties. Changes in ultraviolet and infrared spectroscopy were monitored on photo-oxidation and hydroperoxide content determined. The soft segment length was increased by increasing the molecular weight of PEG from 400 to 1000 and hard segment structure was changed by variation of diamine. It was noted that the structure of urea and polyether soft segment length plays an important role in photostability of PEUUs. PDA chain extended PEUUs were more stable than HDA chain extended PEUUs.     

Selection of optimized features for fusion of palm print and finger knuckle‐based person authentication

The impact of digital technology in biometrics is much more efficient at interpreting data than humans, which results in completely replacement of manual identification procedures in forensic science. Because the single modality‐based biometric frameworks limit performance in terms of accuracy and anti‐spoofing capabilities due to the presence of low quality data, therefore, information fusion of more than one biometric characteristic in pursuit of high recognition results can be beneficial. In this article, we present a multimodal biometric system based on information fusion of palm print and finger knuckle traits, which are least associated to any criminal investigation as evidence yet. The proposed multimodal biometric system might be useful to identify the suspects in case of physical beating or kidnapping and establish supportive scientific evidences, when no fingerprint or face information is present in photographs. The first step in our work is data preprocessing, in which region of interest of palm and finger knuckle images have been extracted. To minimize nonuniform illumination effects, we first normalize the detected circular palm or finger knuckle and then apply line ordinal pattern (LOP)‐based encoding scheme for texture enrichment. The nondecimated quaternion wavelet provides denser feature representation at multiple scales and orientations when extracted over proposed LOP encoding and increases the discrimination power of line and ridge features. To best of our knowledge, this first attempt is a combination of backtracking search algorithm and 2D²LDA has been employed to select the dominant palm and knuckle features for classification. The classifiers output for two modalities are combined at unsupervised rank level fusion rule through Borda count method, which shows an increase in performance in terms of recognition and verification, that is, 100% (correct recognition rate), 0.26% (equal error rate), 3.52 (discriminative index), and 1,262 m (speed).     

Favorable influence of ssDNA-functionalized SWCNT on the navigation pattern of C. elegans

Microsystem Technologies - Single-Walled Carbon Nanotubes (SWCNTs) are widely used as potential carriers in drug delivery systems. The objective of this work was to observe the effects of pristine,...