The partition coefficients of ethylene between hydrate and vapor for methane + ethylene + water and methane + ethylene + SDS + water systems

The hydrate formation of CH₄+C₂H₄ mixture was studied experimentally in two different cases, with and without the presence of sodium dodecyl sulfate (SDS) in water. The results manifested that the presence of SDS could not only accelerate the hydrate formation process, but also increase the partition coefficient of ethylene between hydrate and vapor drastically. The partition coefficients of ethylene between hydrate and vapor for methane + ethylene + water with the presence of 500 ppm SDS in water were then systematically measured. The experimental temperature ranged from 273.15 to 278.15 K, the pressure ranged from 2.5 to 5.5 MPa, the initial gas-liquid volume ratio ranged from 95 to 240 standard volumes of gas per volume of liquid, and the mole percentage of ethylene in feed gas mixture ranged from 5.28% to 79.36%. The results demonstrated that ethylene could be enriched in hydrate phase and partition coefficients were increased with the presence of SDS in water. This conclusion is of industrial significance; it implies that it is feasible to recover ethylene from gas mixture, e.g., various kinds of refinery gases or cracking gases in ethylene plant, by forming hydrate.     

Improving oxygen barrier properties of poly(ethylene terephthalate) by incorporating isophthalate. I. Effect of orientation

The present study examined poly(ethylene terephthalate) (PET) and a series of statistical and blocky copolymers in which up to 30% of the terephthalate was replaced with isophthalate by copolymerization and melt blending, respectively. Some level of transesterification during processing of melt blends resulted in blocky copolymers, as confirmed by NMR. Random and blocky copolymers exhibited similar properties in the glassy state, including a single glass transition, due to miscibility of the blocks. However, random copolymerization effectively retarded cold‐crystallization from the glass whereas blocky copolymers readily cold‐crystallized to a crystallinity level close to that of PET. The polymers were oriented at four temperatures in the vicinity of the T_g and characterized by oxygen transport, wide‐angle X‐ray diffraction, positron annihilation lifetime spectroscopy, and infrared spectroscopy. Orientation of all the copolymers resulted in property changes consistent with strain‐induced crystallization. However, blocky copolymers oriented more easily than random copolymers of the same composition and after orientation exhibited slightly lower oxygen permeability, higher density, and higher fraction trans conformers. Analysis of oxygen solubility based on free volume concepts led to a two‐phase model from which the amount of crystallinity and the amorphous phase density were extracted. Dedensification of the amorphous phase correlated with the draw temperature. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1615–1628, 2005     

基于IOS平台的小型仓储管理系统设计

随着数字化、信息化技术在物流领域应用的飞速发展,各种各样的仓储管理系统日益受到关注。本文介绍的基于IOS平台的小型仓储管理系统是利用IOS设备对货物信息进行采集,通过SQLite数据库技术、ZXing库等软硬件方式构建的业务系统,可以较好地适应中小规模用户数据交互的需求。同时,系统具备造价低廉、操作便捷等优点。     

Grafting poly(t‐butyl acrylate) to poly(allylamine) by inverse microemulsion radical polymerization: From comb‐polymer to amphiphilic shell crosslinked polymer nanocapsule

An interfacial grafting radical polymerization method for amphiphilic comb copolymer and shell crosslinked polymer nanocapsules was reported. Macropolyradicals on a water soluble long chain polyamine were generated with hydrogen peroxide in the water phase and subsequent grafting radical polymerization of a vinylic monomer at the water/oil interface proceeded at 65°C. In the presence of a crosslinker, the resulting graft copolymer formed a defined core‐shell structure with hydrophilic aqueous core functionalized by the polyamine and a hydrophobic crosslinked polymer shell. The structure of the core‐shell material was characterized by NMR, FTIR, DSC, TGA, SEM, TEM, and the mechanism of the graft polymerization is proposed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1905–1911, 2007     

隔膜电解制备Mn^3＋的研究

对电解媒质ＭｎＳＯ４在有隔膜条件下电解制备Ｍｎ３＋过程进行了研究。结果表明，无论均相还是非均相隔膜电解，在常温２０℃、４０％Ｈ２ＳＯ４介质中，当电流密度、ＭｎＳＯ４浓度、电解时间在很宽的范围变动时，电流效率保持很高，至少在８５％以上。     

Electrolytic recovery of chlorine from hydrogen chloride gas with fused molten salt electrolyte LiCl/KCl

A method of electrolytic recovery of chlorine from hydrogen chloride gas based on the fused molten salt LiCl/KCl is under development. For the feasibility study, described here, a reticulated vitreous carbon (or porous carbon) cathode was immersed in a low-melting eutectic of LiCl/KCl. A graphite rod was used as the anode. Gaseous dilute hydrogen chloride, in a mixture with nitrogen, was reduced to elemental hydrogen and chloride at the cathode, and chlorine was produced at the anode. At stoichiometric current, current efficiency is greater than 90%. The removal efficiency is as high as 97%.Patent pending (May 1995).     

软胶囊亮发素的制备

本文介绍了用明胶软胶囊包装的亮发素的配方和制备方法。在亮发素中含有低粘度液体石蜡油、精制橄榄油、精制茶籽油、精制沙棘籽油、棕榈酸异丙酯、肉豆蔻酸异丙酯、油酸乙酯、二甲基聚硅氧烷、维生素Ｅ和油溶性香料等成份。     

酯交换法合成碳酸二苯酯研究进展

对碳酸二苯酯合成用催化剂、合成工艺、反应装置等进行了综述。认为国内应加强酯交换法合成碳酸二苯酯的基础研究 ,尽快实现其产业化     

模糊控制器在窑炉温度控制系统中的应用及计算机仿真

对陶瓷工业窑炉中的温度模糊控制问题进行了探讨,提出了模糊控制器在窑炉温控上的具体应用方法,并进行了计算机仿真,仿真结果表明模糊控制效果良好,具有较好的应用前景。     

不同分子量聚酯的羟值分析方法

用醋酐／高氯酸／乙酸乙酯法，醋酐吡啶回流法，分别对相对分子质量为１１００－１２０００的聚酯进行了羟值的测定，并用气压渗透法和析出物溶解重滴法进行了核对。结果表明醋酐／高氯酸／乙酸乙酯法对于Ｍ〈５０００的聚酯是适用的，而高分子量的聚酯则必须用醋酐／吡啶回流法，才能获得满意的结果。