A participative end-user method for multi-perspective business process elicitation and improvement

A business process can be characterized by multiple perspectives (intentional, organizational, operational, functional, interactional, informational, etc). Business process modeling must allow different stakeholders to analyze and represent process models according to these different perspectives. This representation is traditionally built using classical data acquisition methods together with a process representation language such as BPMN or UML. These techniques and specialized languages can easily become hard, complex and time consuming. In this paper, we propose ISEA, a participative end-user modeling approach that allows the stakeholders in a business process to collaborate together in a simple way to communicate and improve the business process elicitation in an accurate and understandable manner. Our approach covers the organizational perspective of business processes, exploits the information compiled during the elicitation of the organizational perspective and touches lightly an interactional perspective allowing users to create customized interface sketches to test the user interface navigability and the coherence within the processes. Thus, ISEA can be seen as a participative end-user modeling approach for business process elicitation and improvement.     

Towards a continuous microfluidic rheometer

In a previous paper we presented a way to measure the rheological properties of complex fluids on a microfluidic chip (Guillot et al., Langmuir 22:6438, 2006). The principle of our method is to use parallel flows between two immiscible fluids as a pressure sensor. In fact, in a such flow, both fluids flow side by side and the size occupied by each fluid stream depends only on both flow rates and on both viscosities. We use this property to measure the viscosity of one fluid knowing the viscosity of the other one, both flow rates and the relative size of both streams in a cross-section. We showed that using a less viscous fluid as a reference fluid allows to define a mean shear rate with a low standard deviation in the other fluid. This method allows us to measure the flow curve of a fluid with less than 250 μL of fluid. In this paper we implement this principle in a fully automated set up which controls the flow rate, analyzes the picture and calculates the mean shear rate and the viscosity of the studied fluid. We present results obtained for Newtonian fluids and complex fluids using this set up and we compare our data with cone and plate rheometer measurements. By adding a mixing stage in the fluidic network we show how this set up can be used to characterize in a continuous way the evolution of the rheological properties as a function of the formulation composition. We illustrate this by measuring the rheological curve of four formulations of polyethylene oxide solution with only 1.3 mL of concentrated polyethylene oxide solution. This method could be very useful in screening processes where the viscosity range and the behavior of the fluid to an applied stress must be evaluated.     

Comparative morphology of leaf epidermis in eight populations of Atlas Pistachio (Pistacia atlantica Desf., Anacardiaceae)

A comparative analysis was undertaken to conduct a micromorphological study of Pistacia atlantica leaves by comparing different populations grown under different climatic conditions. Leaf epidermis of eight wild populations was investigated under scanning electron microscope. Micromorphological characteristics (epidermis ornament, stomata type, waxes as well as trichomes) of the adaxial and abaxial leaf surfaces were examined. The epidermis ornament varied among populations and leaf surface, the abaxial leaf surface is reticulate with a striate surface. Messaad site shows a smooth uneven surface. The adaxial leaf surface is smooth but several ornamentations can be seen. The leaflet is amphistomatic; the stomata appeared to be slightly sunken. A variety of stomatal types were recorded; actinocytic and anomocytic types are the most frequent. The indumentum consisted of glandular and nonglandular trichomes. Unicellular glandular trichomes are recorded for P. atlantica leaves in this study. Their density is higher in Oued safene site, located at the highest altitude in comparison with the other populations. The wax occurred in all the sites and its pattern varied according to the populations studied, particularly between Berriane and Messaad. The morphological variability exhibited by the eight populations of P. atlantica may be interpreted as relevant to the ecological plasticity and the physiological mechanisms involved are discussed in this report.     

Mining frequent conjunctive queries in relational databases through dependency discovery

We present an approach for mining frequent conjunctive in arbitrary relational databases. Our pattern class is the simple, but appealing subclass of simple conjunctive queries. Our algorithm, called Conqueror $^+$ , is capable of detecting previously unknown functional and inclusion dependencies that hold on the database relations as well as on joins of relations. These newly detected dependencies are then used to prune redundant queries. We propose an efficient database-oriented implementation of our algorithm using SQL and provide several promising experimental results.     

Profiling hospitals based on emergency readmission: a multilevel transition modelling approach

Emergency readmission is seen as an important part of the United Kingdom government policy to improve the quality of care that patients receive. In this context, patients and the public have the right to know how well different health organizations are performing. Most methods for profiling estimate the expected numbers of adverse outcomes (e.g. readmission, mortality) for each organization. A number of statistical concerns have been raised, such as the differences in hospital sizes and the unavailability of relevant data for risk adjustment. Having recognized these statistical concerns, a new framework known as the multilevel transition model is developed. Hospital specific propensities of the first, second and further readmissions are considered to be measures of performance, where these measures are used to define a new performance index. During the period 1997 and 2004, the national (English) hospital episodes statistics dataset comprise more than 5 million patient readmissions. Implementing a multilevel model using the complete population dataset could possibly take weeks to estimate the parameters. To resolve the problem, we extract 1000 random samples from the original data, where each random sample is likely to lead to differing hospital performance measures. For computational efficiency a Grid implementation of the model is developed. Analysing the output from the full 1000 sample, we noticed that 4 out of the 5 worst performing hospitals treating cancer patients were in London. These hospitals are known to be the leading NHS Trusts in England, providing diverse range of services to complex patients, and therefore it is inevitable to expect higher numbers of emergency readmissions.     

Polytope-based computation of polynomial ranges

Polynomial ranges are commonly used for numerically solving polynomial systems with interval Newton solvers. Often ranges are computed using the convex hull property of the tensorial Bernstein basis, which is exponential size in the number n of variables. In this paper, we consider methods to compute tight bounds for polynomials in n variables by solving two linear programming problems over a polytope. We formulate a polytope defined as the convex hull of the coefficients with respect to the tensorial Bernstein basis, and we formulate several polytopes based on the Bernstein polynomials of the domain. These Bernstein polytopes can be defined by a polynomial number of halfspaces. We give the number of vertices, the number of hyperfaces, and the volume of each polytope for n=1,2,3,4, and we compare the computed range widths for random n-variate polynomials for n?10. The Bernstein polytope of polynomial size gives only marginally worse range bounds compared to the range bounds obtained with the tensorial Bernstein basis of exponential size.     

A numerical hydrodynamic and thermal characterization of an inter-strata liquid cooling solution for 3D ICs

A novel integrated thermal management solution is proposed to alleviate hot spots in a contemporary 3D IC architecture. The solution employs a series of integrated microchannels, interconnected through each stratum by through silicon fluidic vias (TSFVs), and permits the transfer of heat, via a coolant, from hot to cold zones. This microfluidic system is driven by an integrated AC electrokinetic pump embedded in the channel walls. Recent advancements in electrokinetic micropump technology have allowed greater increases in fluid velocity (mm/s) while operating within the voltage constraints of a 3D IC. This paper presents a 2D simulation of an electrokinetic micropump operating at V_pp = 1.5 V in a 40 μm channel and examines its velocity profile for six frequencies in the range 100 ≤ ω ≤ 100 MHz. An optimum frequency of 100 kHz was established within this range and this was further examined with a constant heat flux of 186 W/cm2 imposed on the wall for an inlet fluid temperature of 40°C. Temperature profiles are presented at the channel-silicon interface and compared with theory.     

How to take into account general and contextual knowledge for interactive aiding design: Towards the coupling of CSP and CBR approaches

The goal of this paper is to show how it is possible to support design decisions with two different tools relying on two kinds of knowledge: case-based reasoning operating with contextual knowledge embodied in past cases and constraint filtering that operates with general knowledge formalized using constraints. Our goals are, firstly to make an overview of existing works that analyses the various ways to associate these two kinds of aiding tools essentially in a sequential way. Secondly, we propose an approach that allows us to use them simultaneously in order to assist design decisions with these two kinds of knowledge. The paper is organized as follows. In the first section, we define the goal of the paper and recall the background of case-based reasoning and constraint filtering. In the second section, the industrial problem which led us to consider these two kinds of knowledge is presented. In the third section, an overview of the various possibilities of using these two aiding decision tools in a sequential way is drawn up. In the fourth section, we propose an approach that allows us to use both aiding decision tools in a simultaneous and iterative way according to the availability of knowledge. An example dealing with helicopter maintenance illustrates our proposals.     

Experimental tracking of silica dispersion into silicone polymer

This work deals with the experimental tracking of a dispersion of very fine silica particles in PDMS using a new, easily implemented methodology. The dispersion experiments are carried out in an 8-l capacity mixer equipped with a torquemeter. Using a Couette analogy, the torque-rotational speed data can be converted into process viscosity-effective shear rate data. Simultaneously, the Particle Size Distribution (PSD) evolution is followed through Laser Light Scattering measurements on diluted samples. The PSD evolution allowed us to interpret the dispersion process in terms of different mechanisms, such as breaking-up and erosion of aggregates, as well as, in some cases, re-agglomeration (or flocculation) of particles.     

Photocatalytic degradation of a phenylurea, chlortoluron, in water using an industrial titanium dioxide coated media

The degradation of an herbicide, chlortoluron, by UV/TiO₂ photocatalysis in water using industrial titanium dioxide coated non-woven paper was studied. The influence of parameters such as adsorption capacity, initial concentration and TiO₂ implementation (coated or in suspension) was investigated. The results emphasize the importance of operational conditions and reactor geometry on the kinetic degradation rate. The analysis of the first organic by-products suggests that a hydroxyl radical attack occurs on the phenyl ring and methyl groups of the chlortoluron before the opening of the aromatic ring. The fate of hetero-atoms has been investigated. The fates of the two nitrogen atoms in the molecule are different, not only did it depend on their initial oxidation degree, as both had the same oxidation degree, but also on the initial oxidation state of neighboring carbons. The chlorine atoms were completely released as chloride ions. The study of the influence of the oxygen concentration showed the importance of the oxygen mass transfer when designing an industrial photocatalytic reactor. An original calculation process was carried out to evaluate the adsorption constant of oxygen over the whole photocatalysis period and not only in the initial conditions as previously provided. This work points out the necessity of extending the understanding of the efficiency of chlortoluron removal or of the removal of various complex pesticide mixtures found in agricultural wastewater, using alternative, more industrially realistic, reactors.