基于MPLS的VPN互访技术

针对VPN互访问题,根据IPSec-VPN互访方法的不足,提出动态MPLS-VPN方法.利用随机分配的标签,在需要互访的不同VPN网络节点之间构建MPLS通道,利用互访规则集检验节点的连接申请,根据过滤规则控制数据包的传输,通过设定传输时长限制节点互访的时间,实现VPN之间接节点、按方向、按时间的细粒度互访控制,确保数据传输的安全性和高效性.给出动态MPLS-VPN方法实现互访的步骤,对方法进行分析比较.     

开放水热法制备莫来石复相纳米晶体的影响因素

以天然高岭土为原料,经精细化处理煅烧制备莫来石.用常压、开放水热技术制备出莫来石复相纳米晶体材料.实验表明:常压、开放水热条件下制备莫来石复相纳米晶粉体的水热反应中,采用质量比为m(Na2O)/m(SiO2)=2.8,m(H2O)/m(Na2O)=35～30,0～80℃控温升温1 h,在80℃保温2 h,可制备出尺寸为80～100 nm莫来石复相纳米晶体.所制备的莫来石纳米晶体的水热溶液相变驱动力△μ为(3.609～4.672)×10-20 J/mol;水热体系溶解度控制在3.891×10-6 mol/L;熔解热△E为18.846 kJ/mol;晶体生长速率常数选择0.85～0.92,有利于快速成核和晶体生长,并且可以很好地控制晶体尺寸和分散度.     

卡尔曼滤波在核脉冲全谱数据采集系统中的应用

针对核脉冲全谱数据采集技术中采用的深度加权滤波法在数据量少时平滑效果差、滞后大的缺点,设计了卡尔曼滤波算法替代传统滤波算法进行解谱的方案。滤波算法首先根据信号与噪声的状态空间模型,建立状态方程和测量方程,然后根据广义卡尔曼滤波对测量方程进行更新,最后根据现场的标准刻度井测量数据确定测量矩阵,对测量数据进行滤波。实测结果表明,该滤波算法相对于传统滤波算法,能够消除谱图的统计涨落,提高光滑度,遏制滞后,并保证滤波后曲线不失真。     

The Effect of Aluminum Ions on the DC Etching of Aluminum Foil

A study has been made of the electrochemical etching of 99.99% aluminum foils at a current density of 50 mA cm^–2in AlCl₃–HCl solutions (1 m Cl^–) at 80 °C. The solutions were made by dissolving metallic aluminum into 1m HCl solution, to give a Cl^– concentration of 1 m. The number density of etch tunnels and the homogeneity of tunnel length decreased, and the mean pit size and its standard deviation increased with increasing Al³⁺ concentration. The results were discussed based on potential transients at a current density of 50 mA cm^–2, current–potential curves at a scan rate of 10 m Vs^–1 and electrochemical impedance spectra.     

Properties and crystallization kinetics of poly(ether ether ketone)‐co‐poly(ether ether ketone ketone) block copolymers

A series of block copolymers composed of poly(ether ether ketone) (PEEK) and poly(ether ether ketone ketone) (PEEKK) components were prepared from their corresponding oligomers via a nucleophlilic aromatic substitution reaction. Various properties of the copolymers were investigated with differential scanning calorimetry (DSC) and a tensile testing machine. The results show that the copolymers exhibited no phase separation and that the relationship between the glass‐transition temperature (T_g) and the compositions of the copolymers approximately followed the formula T_g = T_g1X₁ + T_g2X₂, where T_g1 and T_g2 are the glass‐transition‐temperature values of PEEK and PEEKK, respectively, and X₁ and X₂ are the corresponding molar fractions of the PEEK and PEEKK segments in the copolymers, respectively. These copolymers showed good tensile properties. The crystallization kinetics of the copolymers were studied. The Avrami equation was used to describe the isothermal crystallization process. The nonisothermal crystallization was described by modified Avrami analysis by Jeziorny and by a combination of the Avrami and Ozawa equations. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1652–1658, 2005     

Pyrolysis of peat: Product yield and characterization

Pyrolysis of peat obtained from Yeniça?a, Bolu, Turkey was conducted in a fixed-bed tube furnace under various conditions, and variations in the structure of the char, tar and gas products were examined. The chars produced were studied by proximate and ultimate analyses. The maximum tar yield of 20.41% was obtained at a heating rate of 20 °C/min, a temperature of 450 °C, a sweeping gas flow rate of 100 ml/min and a 0.5–2.0 mm size range. The chemical composition of the tar was examined by elemental analysis, FTIR spectroscopy, ¹H-NMR spectroscopy and column chromatography. The chemical composition of the tar with dense aliphatic structure was established to be CH_1.22O_0.25N_0.02. The composition of the gases obtained at a heating rate of 20 °C/min for the 0.5–2.0 mm size range was examined by gas chromatography.     

Immobilization of a cyclodextrin glucanotransferase (CGTase) onto polyethylene film with a carboxylic acid group and production of cyclodextrins from corn starch using CGTase‐immobilized PE film

Carboxylic acid groups were introduced onto polyethylene (PE) film by radiation‐induced graft copolymerization. Subsequently, the clodextrin glucanotransferase (CGTase) was immobilized on the PE film with a carboxylic acid group. The activity of the immobilized CGTase on PE film was in the range of 0.40–1.04 U/cm² per min. The production of cyclodextrins (CDs) from corn starch was examined using the CGTase‐immobilized PE film. The production ratios of CDs using CGTase‐immobilized PE film was in the following order: α–CD > β–CD > γ–CD. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2451–2457, 2002     

新试剂DBPMP用于铀的萃取光度法测定研究

本文将新型螯合萃取剂DBPMP用于铀的萃取光度法研究。提出了一种选择性好,灵敏度高的测定方法。铀浓度在0～5.0mg/25ml范围内符合比尔定律。将本法用于矿石中铀的测定,结果满意。     

光波导加速度传感器中3dB耦合器设计

光波导加速度传感器是一种实用型加速度传感器,目前广泛应用制备光学加速度计的迈克尔逊、马赫—曾德等干涉仪的核心部件都包含3 dB耦合器。3 dB耦合器的设计对光波导加速度传感器的检测精度尤为重要。介绍了所设计的光波导加速度传感器的工作原理,设计了3 dB耦合器波导的结构和参数,并用光学模拟软件OptiBPM对3 dB耦合器进行模拟。结果表明:所设计的3dB耦合器具有良好性能,符合设计要求。     

CO2在绿色化学合成中的应用

研究了CO2在绿色化学合成中的应用.CO2作为酸碱调节剂和惰性气体,在β-胡萝卜素催化氧化合成角黄素反应中,可以控制反应体系酸性,保护原料中的双键,减少副反应发生,提高催化氧化反应的选择性;异戊二烯氯醇化生成1-氯-2-甲基-3-丁烯-2-醇和1-氯-2-甲基-3-丁唏-4-醇反应中,CO2代替有机酸作酸碱调节剂,控制次氯酸的生成速度,达到调控反应的目的,反应条件温和,不副产固体.