Effect of storage temperature on phenolics stability in hawthorn (Crataegus pinnatifida var. major) fruits and a hawthorn drink

The stability of five major phenolics, namely (−)-epicatechin (EC), procyanidin B₂ (PC-B₂), chlorogenic acid (ChA), hyperoside (HP) and isoquercitrin (IQ), in hawthorn fruits and a canned hawthorn drink were evaluated during 6 months of storage in the dark at three different temperatures (4, 23 and 40 °C). HPLC with a diode-array detector was used to determine the contents of the individual compounds. The results showed that the studied phenolics in the hawthorn fruits and the drink were both stable at 4 °C and relatively unstable at 23 and 40 °C with varied extents of degradation. At room temperature (23 °C), marked degradations of EC and PC-B₂ were observed in both the fruits and the drink with around 50% and 30% decrease after a 6-month storage, respectively. A more significant decrease of the phenolics was observed at 40 °C, especially for EC and PC-B₂, which were almost completely degraded after a 6-month storage. HP, IQ and ChA were relatively stable at 23 °C, but unstable at 40 °C. Therefore, low-temperature storage is recommended for maintaining the quality and efficacy of hawthorn fruits and its preparations.     

Study on phase behavior–impact strength relationship of unsaturated polyester/polyurethane hybrid polymer network

The phase behavior of a hybrid polymer network (HPN) composed of poly[(propylene glycol maleate)-co-(propylene glycol phthalate)] crosslinked with styrene and polyester–urethane crosslinked with methylene-bis-ortho-chloroaniline was examined. The correlation between phase separation and impact strength of the HPNs is discussed. The composition of HPNs has an effect on their properties.     

空间环型区域上的关联函数

本文利用锥函数方法，给出空间环型区域上关联函数的一种计算方法。     

MoSi2—Mo5Si3复合材料的低温氧化行为

通过热重分析（TGA）、X射线衍射（XRD）和扫描电镜（SEM）研究了MoSi2-Mo5Si3复合材料的低温氧化行为,指出材料低温氧化时,随Mo5Si3量增多,材料氧化加剧,当Mo5Si3含量超过16％（质量分数）时发生“PEST”现象,所形成的SiO2由于MoS3晶须的大量存在,使其不能均匀连续地分布于材料表面,从而加剧了氧化。     

空压机组汽轮机排气压力、温度高原因分析及解决方法探讨

1概况 空压机汽轮机组是空分装置原料和动力的提供者,主要由空压机和工业汽轮机两部分组成.汽轮机为注入凝汽式汽轮机,型号NK-32/36/16-3,级数为1冲动级15反动级,功率9022kW,额定转速7270 r/min,主蒸汽压力6.9 Mpa,主蒸汽温度550℃,主蒸汽流量通常31.9t/h,最大36.8t/h,排汽压力通常0.015MPa,最大0.04MPa,排汽温度通常55℃,最大120℃.但由于多种原因,注汽一直未投,平常为全凝汽式运行.     

聚氯乙烯塑料中多种邻苯二甲酸酯类增塑剂的同时测定

为了在线监控聚氯乙烯塑料中增塑剂的含量,利用傅立叶变换红外光谱法-ATR技术测定样品的红外光谱,采用偏最小二乘法对所测红外光谱进行分析,建立了一种无损快速分析方法,定量地测定聚氯乙烯塑料中多种邻苯二甲酸酯类增塑剂的含量。该方法测量精密度的变异系数小于6%,测量准确度的变异系数小于3%。该方法不受基体的干扰,简单快速,适合于流水线的质量控制。     

YL-1OO型自动加药装置在乙烯循环水场的应用

介绍了国产YL-100型自动加药装置功能及其在中国石化茂名石化乙烯工业公司乙烯循环水场的应用情况,结果表明其运行平稳,总磷测试数据可靠,可达到循环水自动加药控制的目的。     

明胶和胶囊生产干燥新工艺的研究

本文介绍了氯化锂液体除湿的工作原 理,并深入分析了其除湿工艺、主要特点和在 明胶与胶囊干燥方面的研究和应用。     

UHMWPE混炼接枝马来酸酐研究

讨论了超高相对分子质量聚乙烯(UHMWPE)混炼接枝马来酸酐(MAH)过程中，单体MAH用量、引发剂DCP用量、交联抑制剂己内酰胺(CAILA)用量、流动改性剂硬脂酸钙(CaSt2)用量及混炼温度、时间等工艺条件对UHMWPE接枝率和凝胶含量的影响。用红外光谱表征了接枝物的存在。并用滴定分析法和重量分析法测定了接枝物UHMWPE～g～MAH的接枝率和凝胶含量。实验表明，MAH用量为5份、DCP为0．15份、CALA为0．1份、CaSt2为1份时。混炼温度175∽180℃。混炼时间14min时，可得到接枝率0．75％、凝胶含量1．48%的UHMWPE接枝物。