Thirteen Stages in Wind and Solar Plant Development

Renewable electric power plant development is one of the fastest-growing industries in the United States and the world. There are a significant number of investors that are entering this market, some with and some without prior energy industry experience. Developers, especially those without energy industry experience, can potentially commit serious mistakes and waste millions of dollars in their initial investment. This is primarily because interfacing with electric utilities is not a well-understood process and does not readily conform to general experience or common sense.     

The impact of property price on construction output

The interaction between the construction market and the overall economy has attracted much attention, but few studies have investigated the influence of the property market on the construction market in terms of property price. The disaggregated data of Hong Kong’s housing and retail construction sectors are collected to investigate the impact of property price on construction output. The newly developed autoregressive distributed lag (ARDL) bounds testing approach and the error correction (EC)-based Granger causality test are employed. The bounds testing results suggest that there exist stable long-run relationships between construction output and property price for both housing and retail construction sectors. Specifically, a 1.00% increase in the housing price and retail price lead to a 0.55% and 0.42% increase in construction outputs for the two sectors respectively. In addition, the Granger causality tests confirm a distinct long-run causal flow from property price to construction output. Furthermore, the proposed ARDL approach provides an effective method for forecasting construction output.     

Epoxidation reaction of trimethylolpropane with epichlorohydrin: Kinetic study of chlorohydrin formation

The kinetics of the reaction between trimethylolpropane (TMP) and epichlorohydrin (ECH) were studied. A mechanism is proposed which involves the synthesis of chlorohydrins, a previous stage which then leads to epoxy resin formation. From this mechanism a set of three coupled non-linear differential equations, (each equation corresponds to each chlorohydrin) was derived and numerical solutions were obtained using a Monte-Carlo method. The concentrations of chlorohydrins determined by this method (41.7, 35.7, and 22.5%) compare well with the experimental GPC results (42.7, 34.7, and 22.6%). The corresponding rate constants for the formation of the chlorohydrins were obtained.     

Solubility of actinide surrogates in nuclear glasses

This paper discusses the results of a study of actinide surrogates in a nuclear borosilicate glass to understand the effect of processing conditions (temperature and oxidizing versus reducing conditions) on the solubility limits of these elements. The incorporation of cerium oxide, hafnium oxide, and neodymium oxide in this borosilicate glass was investigated. Cerium is a possible surrogate for tetravalent and trivalent actinides, hafnium for tetravalent actinides, and neodymium for trivalent actinides. The material homogeneity was studied by optical, scanning electron microscopy. Cerium L_III XANES spectroscopy showed that the Ce³⁺/Ce_total ratio increased from about 0.5 to 0.9 as the processing temperature increased from 1100 to 1400 °C. Cerium L_III XANES spectroscopy also confirmed that the increased Ce solubility in glasses melted under reducing conditions was due to complete reduction of all the cerium in the glass. The most significant results pointed out in the current study are that the solubility limits of the actinide surrogates increases with the processing temperature and that Ce³⁺ is shown to be more soluble than Ce⁴⁺ in this borosilicate glass.     

Thermal and structural behavior of milk fat. 1. Unstable species of anhydrous milk fat

The thermal and structural behavior of anhydrous milk fat (AMF) was studied by a technique that allowed simultaneous time-resolved synchrotron X-ray diffraction as a function of temperature (XRDT) and high sensitivity differential scanning calorimetry (DSC) to be carried out in the same apparatus from the same sample. In this paper (the first of a series), the less stable crystalline structures made by triacylglycerols (TG) of bulk AMF after its liquid quenching down to -8 degrees C are addressed The coexistence of two lamellar structures characterized by sharp long spacing reflections corresponding to well-defined 3L (70 A) and 2L (47 A) longitudinal stackings but broad short spacing lines related to poorly ordered hexagonal (alpha) lateral packing is shown for the first time, The bilayered structure was very unstable, since it disappeared during a 20-min isothermal recording. Simultaneous DSC and X-ray monitoring of AMF heating in the range -8, +50 degrees C at a rate of 2 degrees C/min allows the same sample to be followed on the evolution of these unstable forms to more stable varieties. The 3L stacking transforms into a new 2L crystalline structure characterized by broad LS reflections corresponding to a ill-defined 2L (37 A) longitudinal stacking but a more compact orthorhombic (beta') lateral packing. A delimitation of the domains of existence of the crystalline structures resulted from the comparison of detailed analysis of the evolutions of positions, intensities, and widths of X-ray peaks as a function of temperature to microcalorimetry recording.     

Computational analysis of a three-dimensional high-velocity oxygen fuel (HVOF) thermal spray torch

An analysis of a high-velocity oxygen fuel thermal spray torch is presented using computational fluid dynamics (CFD). Three-dimensional CFD results are presented for a curved aircap used for coating interior surfaces such as engine cylinder bores. The device analyzed is similar to the Metco diamond jet rotating wire torch, but wire feed is not simulated. The feed gases are injected through an axisymmetric nozzle into the curved aircap. Argon is injected through the center of the nozzle. Premixed propylene and oxygen are introduced from an annulus in the nozzle, while cooling air is injected between the nozzle and the interior wall of the aircap. The combustion process is modeled assuming instantaneous chemistry. A standard, two-equation, k-ε turbulence model is employed for the turbulent flow field. An implicit, iterative, finite volume numerical technique is used to solve the coupled conservation of mass, momentum, and energy equations for the gas in a sequential manner. Computed flow fields inside and outside the aircap are presented and discussed.     

Influence of post‐extrusion parameters on the final morphology of polystyrene/high density polyethylene blends

The deformation of the dispersed phase in polystyrene/high density polyethylene (PS/HDPE) blends produced by ribbon extrusion was studied numerically and experimentally. A mathematical model for the deformation of the dispersed phase in ribbon extrusion processing of polymer blends was developed assuming uniaxial deformation of the ribbon and the equilibrium shapes of the dispersed particles with a pressure balance over a drop. Simulated morphologies as function of the post‐extrusion parameters were obtained and compared with experiments. The analysis of the ribbon extrusion process showed that parameters such as draw ratio (DR) and ribbon‐water contact length (X) significantly influence the ribbon dimensions, the extensional stress, and the stretching force. The results also showed that deformation and coalescence of the dispersed phase in the ribbon extrusion processing of polymer blends increase at higher DR and/or lower X values. The comparison between the model and the experimental morphologies of PS/HDPE produced a good agreement.     

Drying of Biomass in a Conical Spouted Bed with Different Types of Internal Devices

The drying of sawdust was studied in a conical spouted bed pilot plant in order to adapt this feed for the pyrolysis process. Air at different temperatures was used and the effect of sawdust particle size and operating gas velocity was studied. Batch operation was performed with no internal device and with nonporous and open-sided draft tubes in order to ascertain the optimum configuration of the contactor. Although the nonporous draft tube required the lowest minimum spouting velocity, its performance was poor due to deficient gas–solid contact. Configurations with open-sided draft tubes and with no internal devices had higher efficiencies because of their better contacts. An increase in air temperature resulted in a reduction in drying time but the operating conditions need to be fine-tuned to ensure proper energy efficiency.     

Influence of Dry Matter Content and Drying Conditions on Effective Diffusion Coefficient of Onion (Allium cepa,L.)

ABSTRACT

Demand for fresh and dehydrated onions has increased considerably over the last two decades. To meet this challenge new varieties possesing superior field characteristics have been developed whose dehydration characteristics differ markedly. In this work the influence of dry matter content in the raw onion and drying conditions on the effective diffusion coefficient is studied. In the falling rate period, the diffusion activation energy was found to be 33.9 kJ/mol, and the D_σ parameter (the effective diffusivity at high moisture contents) was found to be 5.0736×10^-5 m²/s. On the basis of measurements with seven different onion varieties (with raw dry matter content between 19.5 and 23.5 kg dry matter/kg fresh product) an exponential relationship was found between the effective diffusivity and dry matter content of the raw onion.     

Effect of Thermal Treatment on Microstructure and Fracture Strength of SiC Coatings

SiC coatings in tri‐structural isotropic‐coated (TRISO) particles were thermally treated at 2000°C for 1 h in argon atmosphere. The fracture strength of the SiC decreased while change in the Weibull modulus of the failure strength is more complex after the thermal treatment. The variation in both fracture strength and Weibull modulus can be explained by the formation of the pores in SiC due to thermal treatments, as annihilation of the stacking faults and diffusion of intrinsic defects lead to the pore formation.