Reduced myofibroblast differentiation on femtosecond laser treated 316LS stainless steel

In-stent restenosis is a common complication after stent surgery which leads to a dangerous wall narrowing of a blood vessel. Laser assisted patterning is one of the effective methods to modify the stent surface to control cell–surface interactions which play a major role in the restenosis. In this current study, 316LS stainless steel substrates are structured by focusing a femtosecond laser beam down to a spot size of 50 μm. By altering the laser induced spot density three distinct surfaces (low density (LD), medium density (MD) and high density (HD)) were prepared. While such surfaces are composed of primary microstructures, due to fast melting and re-solidification by ultra-short laser pulses, nanofeatures are also observed as secondary structures. Following a detailed surface characterization (chemical and physical properties of the surface), we used a well-established co-culture assay of human microvascular endothelial cells and human fibroblasts to check the cell compatibility of the prepared surfaces. The surfaces were analyzed in terms of cell adherence, proliferation, cell morphology and the differentiation of the fibroblast into the myofibroblast, which is a process indicating a general fibrotic shift within a certain tissue. It is observed that myofibroblast proliferation decreases significantly on laser treated samples in comparison to non-treated ones. On the other hand endothelial cell proliferation is not affected by the surface topography which is composed of micro- and nanostructures. Such surfaces may be used to modify stent surfaces for prevention or at least reduction of restenosis.     

A novel microbial BOD biosensor developed by the immobilization of P. Syringae in micro‐cellular polymers

BACKGROUND: A biochemical oxygen demand (BOD) sensor, based on an immobilized Pseudomonas syringae in highly porous micro‐cellular polymer (MCP) in combination with a dissolved oxygen electrode, has been developed for the analysis of biodegradable organic compounds in aqueous samples. Microorganisms were immobilized in a molded MCP disk and a wastewater sample was injected into the biocomposite disk by a flow injection system. Dissolved oxygen (DO) changes as a measure of soluble BOD was read with a DO probe placed into a flow cell carrying biocatalytically activated disk. RESULTS: Optimal response of the MCP BOD sensor was obtained at pH 6.8 and 25 °C with a typical response time of 3–5 min for a 2 mm thick molded polymeric disk. The sensor showed detection linearity over the range 5–100 mg L^?1 BOD₅ (r² > 0.99) at a flow rate of 0.6 mL min^?1. The repeatability and reproducibility of the sensor response were found to be 3.08% and 7.77%, respectively. BOD values produced with this biosensor for various municipal and industrial wastewaters correlated well with those determined by the conventional 5‐day BOD test. CONCLUSION: This new biosensor was different from present amperometric BOD biosensor configurations in which the biocatalyst (microbial/enzymatic) is placed between cellulose and Teflon membranes installed on a DO probe. The use of a molded MCP disk coniainng microbial activity offers better stability and lifetime for commercial use in environmental monitoring. Copyright © 2008 Society of Chemical Industry     

Amperometric alcohol biosensors based on conducting polymers: Polypyrrole,poly(3,4-ethylenedioxythiophene) and poly(3,4-ethylenedioxypyrrole)

Alcohol biosensors based on conducting polypyrrole (PPy), poly(3,4-ethylenedioxythiophene) (PEDOT) and poly(3,4-ethylenedioxypyrrole) (PEDOP) were constructed. Alcohol oxidase (AlcOx, from Pichia pastoris) was immobilized during electropolymerization of the monomers in sodium dodecylsulfate (SDS) and phosphate buffer electrolysis medium. Optimization of several parameters was carried out. The highest affinity was observed for the PEDOT/AlcOx sensor. Lowry protein determination method was also used to calculate the amount of immobilized enzyme in sensors. Before testing the biosensors on alcoholic beverages effects of interferents (glucose, acetic acid, citric acid, and l-ascorbic acid) were determined. The alcohol contents of the distilled beverages (vodka, dry cin, whisky, and rak?) were determined with the sensors constructed. A good match with the chromatography results was observed.     

The effects of achromatic and chromatic color schemes on participants' task performance in and appraisals of an office environment

This study explores the effects of chroma on participants' performance and environmental appraisal of an office. The research was conducted in a full‐scale experimental room designed as a private office where achromatic and chromatic color schemes with coequal values were applied. Sixty participants were assigned tasks and given a questionnaire to appraise the spatial color schemes. The findings show that chroma significantly affects performance and space appraisal. In terms of accuracy and time spent performance scores measured significantly better in the room with the chromatic scheme than those in the room with the achromatic scheme. The office with the chromatic scheme was found to be more pleasant, attractive, satisfying and dynamic than the one with the achromatic scheme, whereas the achromatic scheme was thought to be more formal and harmonious. Categorization of pleasantness, harmony, dynamism and spaciousness by factor analysis also showed differences between the achromatic and chromatic schemes. © 2011 Wiley Periodicals, Inc. Col Res Appl, 2012     

Formulation and Processing of a Heat Stable Calcium-fortified Soy Milk

Calcium-fortified soy milk (200 mg/100g) was formulated by adding water (85–90°C) full-fat soy flour (10%), sucrose (2.75%) and soy protein isolate (2.25%). Following homogenization, the blend was twice clarified and pasteurized at 65°C/30 min before refrigeration. Samples of the soy milk (45°C) were adjusted to pH 8 before adding calcium lactogluconate (1.55%) and varying amounts of sodium hexametaphosphate or potassium citrate. Samples with 1.25% potassium citrate the best heat stability. For successful calcium fortification, it is recommended to maintain a calcium-to-protein ratio < 38 mg/g and to use an appropriate sequestering agent at a molar ratio of 0.8/mole calcium.     

Influence of pH on recombinant human growth hormone production by Pichia pastoris

BACKGROUND: Effect of pH on recombinant human growth hormone (rhGH) production by Pichia pastoris hGH‐Mut⁺ was investigated at pH = 4.2, 5.0, 5.5, and 6.0. RESULTS: The highest cell concentration was obtained at pH = 6.0 with 53 g L^?1, while the highest rhGH concentration was attained at pH = 5.0 as 0.27 g L^?1. Total protease secretion increased with increase in pH and with the cultivation time. Oxygen uptake rate increased with increasing pH up to pH = 6.0, having the maximum value, 37 mmol m^?3 s^?1, at pH = 5.5. K_La values were similar at all the conditions, having a maximum value of 0.14 s^?1 at pH = 5.0. Taking the final rhGH concentration into account, the most favourable pH was 5.0; where AOX1 expression level showed a similar trend to AOX activity profiles, having the highest value of 9.4 × 10¹⁰ copy mg^?1 CDW at t = 15 h; in parallel to AOX1 expression profile, hGH expression level increased until t = 15 h, with the highest value of 4.0 × 10¹⁰ copy mg^?1 CDW, where a sharp increase in rhGH concentration was obtained. The expression levels of pep4, prb1 and prc1 genes, responsible from the production of proteinase A, proteinase B and, carboxypeptidase Y, were parallel to each other. CONCLUSION: Since it was shown that pH is a crucial operating parameter in fermentation processes using P. pastoris, keeping pH constant at its determined optimum value, pH = 5.0, during the bioprocess is vital in terms of recombinant protein production. Copyright © 2010 Society of Chemical Industry     

Epicardial fat thickness is associated with impaired coronary flow reserve in hemodialysis patients

Cardiovascular disease (CVD) is the main cause of mortality in hemodialysis (HD) patients. Epicardial fat tissue (EFT) is a new risk factor in CVD. The aim of this study was to evaluate the association between EFT and coronary artery flow reserve (CFR), which is an early indicator of endothelial dysfunction in coronary vessels of HD patients. We performed a cross‐sectional study including 71 chronic HD patients and 65 age‐ and sex‐matched healthy controls. Epicardial fat tissue was significantly higher in HD patients when compared to healthy controls (6.53 ± 1.01 mm vs. 5.79 ± 1.06 mm, respectively, P < 0.001). On transthoracic Doppler echocardiography, CFR values were significantly lower in HD patients when compared to healthy controls (1.73 ± 0.11 vs. 2.32 ± 0.28, P < 0.001). Correlation analysis showed CFR values to be inversely correlated with EFT (r = ?0.287, P < 0.05). Multiple linear regression analysis was used to define independent determinants of EFT in HD patients. Artery flow reserve, age, body mass index and total cholesterol levels were independently correlated with EFT thickness. This study demonstrated that EFT was significantly higher among HD patients compared to healthy controls. In addition, this study was the first to demonstrate an inverse correlation between EFT and CFR in this patient population.     

Migration behavior of landfill leachate contaminants through alternative composite liners

Four identical pilot-scale landfill reactors with different alternative composite liners were simultaneously operated for a period of about 540 days to investigate and to simulate the migration behaviors of phenolic compounds (phenol, 2-CP, 2-MP, 3-MP, 4-MP, 2-NP, 4-NP, 2,4-DNP, 2,4-DCP, 2,6-DCP, 2,4,5-TCP, 2,4,6-TCP, 2,3,4,6-TeCP, PCP) and heavy metals (Pb, Cu, Zn, Cr, Cd, Ni) from landfill leachate to the groundwater. Alternative landfill liners of four reactors consist of R1: Compacted clay liner (10 cm + 10 cm, k = 10⁻⁸ m/sn), R2: Geomembrane (2 mm HDPE) + compacted clay liner (10 cm + 10 cm, k = 10⁻⁸ m/sn), R3: Geomembrane (2 mm HDPE) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn) + bentonite liner (2 cm) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn), and R4: Geomembrane (2 mm HDPE) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn) + zeolite liner (2 cm) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn). Wastes representing Istanbul municipal solid wastes were disposed in the reactors. To represent bioreactor landfills, reactors were operated by leachate recirculation. To monitor and control anaerobic degradation in the reactors, variations of conventional parameters (pH, alkalinity, chloride, conductivity, COD, TOC, TKN, ammonia and alcaly metals) were also investigated in landfill leachate samples. The results of this study showed that about 35-50% of migration of organic contaminants (phenolic compounds) and 55-100% of migration of inorganic contaminants (heavy metals) to the model groundwater could be effectively reduced with the use of bentonite and zeolite materials in landfill liner systems. Although leachate contaminants can reach to the groundwater in trace concentrations, findings of this study concluded that the release of these compounds from landfill leachate to the groundwater may potentially be of an important environmental concern based on the experimental findings.     

Electropolymerization of N‐hydroxyethylcarbazole on carbon fiber microelectrodes

N‐Hydroxyethylcarbazole (EtOHCz) was electropolymerized on carbon fiber microelectrodes (CFMEs). The polyEtOHCz‐modified CFME was characterized with FTIR‐ATR, scanning electron microscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. The polymer/CFME electrode exhibited the capacitive behavior and also good stability up to 2.0 V. The presence of hydoxylic group of the monomer seems to be an advantage on polymerization because of the unpaired electrons of oxygen, which would make ease at first stage for the adsorbtion on carbon fiber. The estimated value of the low‐frequency redox capacitance (C_LF) was found to increase with increasing dc potential. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009