Research, protection and restoration studies on the historical fabric of Isparta, using Aya Baniya Church as an example

Turkey is a country that bears the tracks of many civilizations because of its geographic location and its characteristics that come from its deeply rooted history. So it contains historical and cultural items of value that are quite rich and can be characterized as intensely universal. Thanks to these valuable items, it has always drawn the attention of the world. Isparta is a city that houses quite a few historical, archaeological and cultural items of value in its structure. Protecting the historical buildings that carry the cultural and historical traces of a period and making a contribution to its reuse for the future of all humanity are a truth of international importance. In this connection, with this study, essential work was carried out and certain suggestions made about St. Baniya Church, which is one of the most important structures of the historically, archaeologically and culturally valuable items that make up the historical fabric of Isparta and especially, the historical and cultural potential of Isparta.     

Investigation of mean glandular dose versus compressed breast thickness relationship for mammography

The relationship between the mean glandular dose (MGD) and the compressed breast thickness (CBT) is commonly used for the presentation of mammographic dose survey results and could also be useful for the assessment of individual breast doses retrospectively in case of lack of necessary dosimetric instrumentation. The high data scattering from the best fit reduces the reliability of this technique. The aim of this study was to investigate the accuracy of this relationship using the data collected from a patient survey and phantom experiment. Patients were divided into three different groups according to their breast glandularities, which were predicted from the inspection of previous mammograms. X-ray beam qualities that will be used in patient examinations were determined according to breast thickness and predicted glandularities. The MGD versus CBT relationship for all the examined patients resulted in a poor correlation (R(2) = 0.28). This relationship was separately obtained for each glandularity group and also for sub-groups of specific beam qualities. The best correlation (R(2) = 0.73) was obtained for the fatty breast group and Mo/Mo combination. A low correlation (R(2) = 0.34) was observed in the mid-glandularity group due to inclusion of a wide range of glandularities in this group. In the case of the dense breast group, although the glandularity range was narrow, there were e still high data scattering (R(2) = 0.25). This was probably due to the use of Mo/Rh and Mo/Mo combinations. This is validated by obtaining the MGD-CBT relationship specific to Mo/Mo combination (R(2) = 0.61).     

Comparison of total‐etch,self‐etch,and selective etching techniques on class V composite restorations prepared by Er:YAG laser and bur: a scanning electron microscopy study

The purpose of this study was to compare total‐etch, self‐etch, and selective etching techniques on the marginal microleakage of Class V composite restorations prepared by Er:YAG laser and bur. Class V cavities prepared on both buccal and lingual surfaces of 30 premolars by Er:YAG laser or bur and divided into six groups. The occlusal margins were in enamel, and the cervical margins were in cementum. Group‐1: bur preparation(bp)+Adper Single Bond 2 (ASB)+Filtek Z550 (FZ); Group‐2: laser preparation(lp)+(ASB)+(FZ); Group‐3: bp + Clearfil S3 Bond Plus (CSBP)+(FZ); Group‐4: lp+(CSBP) (FZ); Group‐5: bp + acid etching+(CSBP)+(FZ); Group‐6: lp + acid etching+(CSBP)+(FZ). All teeth were stored in distilled water at 37°C for 24 hr, and then thermocycled 1000 times (5–55°C). Five teeth from each group were chosen for the microleakage investigation, and two teeth for the scanning electron microscope evaluation. Teeth which were prepared for the microleakage test were immersed in .5% methylene blue dye for 24 hr. After immersion, the teeth were sectioned and observed under a stereomicroscope for dye penetration. Data were analyzed using Kruskal–Wallis and Mann–Whitney U tests (p < .05). More microleakage was observed in the cervical regions compared to the occlusal regions in Groups 3, 5, and 6, respectively (p < .05). There is no statistically significant difference in Groups 1, 2, and 4, in terms of cervical regions versus occlusal regions (p > .05). No significant differences were observed among any groups in terms of occlusal and cervical surfaces, separately (p > .05). Different etching techniques did not influence microleakage of Class V restorations prepared by Er:YAG laser and bur.     

Characterization of the effective atomic number for first row transition elements by the ratio of coherent to compton scattering intensities obtained by wavelength dispersive X-ray fluorescence

The effective atomic numbers of compounds of the first row transition elements were determined experimentally by a scattering method using wavelength dispersive X-ray fluorescence spectrometer. A calibration curve was created by using the intensity ratios of coherent to Compton scattered peaks of pure elements from atomic number 13–48. This relationship was employed to determine the effective atomic numbers of the compounds. The effective atomic numbers were also calculated by using empirical formulas from the literature. Mass attenuation coefficients were calculated using software. The experimentally measured values of the effective atomic numbers with the calculated values by empirical formulas were comparable.     

Macro-azo-initiators having poly(ethylene glycol) units: Synthesis,characterization, and application to AB block copolymerization

Macro-azo-initiators (MAIs) having poly(ethylene glycol) (PEG) units were obtained by various multistep synthetic approaches. In the first stage, macro-azo-initiators of PEG type with azo groups inserted in the main chain were prepared. MAIs were then characterized by chemical analyses, spectral methods, ¹H-NMR, GPC, and DSC techniques. They were used in the free-radical bulk polymerization of dicyclohexylitaconate to synthesize AB block copolymers of poly(ethylene glycol-b-dicyclohexylitaconate) (PEG-b-PDCHI). © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65: 2173–2181, 1997     

Hydrogen from biomass – Present scenario and future prospects

Hydrogen is considered in many countries to be an important alternative energy vector and a bridge to a sustainable energy future. Hydrogen is not an energy source. It is not primary energy existing freely in nature. Hydrogen is a secondary form of energy that has to be manufactured like electricity. It is an energy carrier. Hydrogen can be produced from a wide variety of primary energy sources and different production technologies. About half of all the hydrogen as currently produced is obtained from thermo catalytic and gasification processes using natural gas as a starting material, heavy oils and naphtha make up the next largest source, followed by coal. Currently, much research has been focused on sustainable and environmental friendly energy from biomass to replace conventional fossil fuels. Biomass can be considered as the best option and has the largest potential, which meets energy requirements and could insure fuel supply in the future. Biomass and biomass-derived fuels can be used to produce hydrogen sustainably. Biomass gasification offers the earliest and most economical route for the production of renewable hydrogen.     

A direct borohydride-peroxide fuel cell-LiPO hybrid motorcycle prototype: Investigation of short-term behavior of DBPFC stack – I

In the present study, a safer and more performance 270?W Direct Borohydride/Peroxide Fuel Cell (DBPFC) Stack has been constructed for an electrical hybrid motorbike application. Performance tests were carried out with single cell and 5–10–25?cell stacks. Performance loss has been not observed while stacking DBPFC because of the Independent Cell Liquid Distribution Network (ICLDN) system and special bipolar plate design. The power densities have been approximately 120?mWcm^?2 for a single DBPFC and 25-cell DBPFC stack without any stacking loss. Additionally, the stack temperature has been controlled by keeping the oxidant concentration low, and it has been maintained at approximately 52?°C without using a cooling system. The short-term performances of the 25-cell DBPFC stack have been tested over 25?min and 50?min, which showed that the performance and stack security of the DBPFC are highly related to the oxidant properties, such as the concentration, temperature and feed type.     

CO2 emissions of Turkish manufacturing industry: A decomposition analysis

In this study, CO₂ emissions of Turkish manufacturing industry are calculated by using the fuel consumption data at ISIC revision 2, four digit level. Study covers 57 industries, for the 1995–2001 period. Log Mean Divisia Index (LMDI) method is used to decompose the changes in the CO₂ emissions of manufacturing industry into five components; changes in activity, activity structure, sectoral energy intensity, sectoral energy mix and emission factors. Mainly, it is found that changes in total industrial activity and energy intensity are the primary factors determining the changes in CO₂ emissions during the study period. It is also indicated that among the fuels used, coal is the main determining factor and among the sectors, 3710 (iron and steel basic industries) is the dirtiest sector dominating the industrial CO₂ emissions in the Turkish manufacturing industry.     

Ligand exchange based paraoxon imprınted QCM sensor

In the present work, a paraoxon imprinted QCM sensor has been developed for the determination of paraoxon based on the modification of paraoxon imprinted film onto a quartz crystal combining the advantages of high selectivity of the piezoelectric microgravimetry using MIP film technique and high sensitivity of QCM detection. The paraoxon selective memories have formed on QCM electrode surface by using a new metal–chelate interaction based on pre-organized monomer and the paraoxon recognition activity of these molecular memories was investigated. Molecular imprinted polymer (MIP) film for the detection of paraoxon was developed and the analytical performance of paraoxon imprinted sensor was studied. The molecular imprinted polymer were characterized by FTIR measurements. Paraoxon imprinted sensor was characterized with AFM and ellipsometer. The study also includes the measurement of binding interaction of paraoxon imprinted quartz crystal microbalance (QCM) sensor, selectivity experiments and analytical performance of QCM electrode. The detection limit and the affinity constant (K_affinity) were found to be 0.06 μM and 2.25 × 10⁴ M^? 1 for paraoxon [MAAP–Cu(II)–paraoxon] based thin film, respectively. Also, it has been observed that the selectivity of the prepared paraoxon imprinted sensor is high compared to a similar chemical structure which is parathion.     

Magnetohydrodynamic Natural Convection Flow in an Enclosure with a Finite Length Heater Using the Differential Quadrature (DQ) Method

Analysis of heat and fluid flow transport due to natural convection and magnetohydrodynamic (MHD) flows in a square enclosure with a finite length heater has been performed using the differential quadrature (DQ) technique. The heater with constant heat flux is located on the bottom wall of the enclosure and isothermal boundary conditions are applied to the right vertical wall while the remaining walls are adiabatic. The effects of heater length (0.2 ≤ ? ≤ 0.8), heater location (0.1 ≤ c/L ≤ 0.9), and direction of magnetic force (0° ≤ φ ≤ 90°) for different values of Grashof (10³ ≤ Gr ≤ 10⁶) and Hartmann numbers (0 ≤ Ha ≤ 100) on the heat and fluid flow in the enclosure are studied. According to the results obtained, heat transfer reduces when increasing the Hartmann number. The rate of reduction is higher for high values of Grashof number. The heat transfer rate for the heater closer to the cold wall is considerably higher than the heaters far from the right wall.