Structure-composition relationships of the Traditional Balsamic Vinegar close to jamming transition

The Traditional Balsamic Vinegar of Modena (TBVM), an Italian valuable specialty produced from cooked grape must becomes viscous through a long-ageing process. TBVM may undergo jamming transition which causes its depreciation. A liquid and jammed TBVM were investigated for their microstructure and elemental composition by coupling two non-destructive techniques, i.e. Environmental Scanning Electronic Microscopy (ESEM) and Energy Dispersive X-Ray Spectroscopy (EDS). The same samples were also analyzed for their molecular size distribution by Size Exclusion Chromatography (SEC) and their shear viscosity with a stress-controlled rheometer. TBVM in the jammed state behaved as a pseudoplastic fluid due to the presence of nitrogen-free polymers with a molecular size dispersion lower than a liquid TBVM, the latest showed the Newtonian flow behavior. TBVM solid particles detected close to jamming transition showed a C/O ratio of 2.5 (liquid TBVM) and 3.7 (jammed TBVM), thus much higher than the main TBVM constituents (glucose, fructose and acetic acid). The Fe and Mg content was higher and pH was lower in the jammed TBVM. It was hypothesized that jamming transition in TBVM was the result of the unbalance between two time-dependent phenomena, i.e. the increase of the bulk viscosity and the structure relaxation of nitrogen-free polymers.     

Bijective Linear Time Coding and Decoding for k-Trees

The problem of coding labeled trees has been widely studied in the literature and several bijective codes that realize associations between labeled trees and sequences of labels have been presented. k-trees are one of the most natural and interesting generalizations of trees and there is considerable interest in developing efficient tools to manipulate this class of graphs, since many NP-Complete problems have been shown to be polynomially solvable on k-trees and partial k-trees. In 1970 Rényi and Rényi generalized the Prüfer code, the first bijective code for trees, to a subset of labeled k-trees. Subsequently, non redundant codes that realize bijection between k-trees (or Rényi k-trees) and a well defined set of strings were produced. In this paper we introduce a new bijective code for labeled k-trees which, to the best of our knowledge, produces the first coding and decoding algorithms running in linear time with respect to the size of the k-tree.     

Buoyant heat transport in fluids across tilted square cavities discretely heated at one side

Laminar natural convection heat transfer inside fluid-filled, tilted square cavities cooled at one side and partially heated at the opposite side, is studied numerically. A computational code based on the SIMPLE-C algorithm is used for the solution of the system of mass, momentum, and energy transfer equations. Simulations are performed for a complete range of heater sizes and locations, Rayleigh numbers based on the side of the cavity from 10³ to 10⁷, Prandtl numbers from 0.7 to 700, and tilting angles of the enclosure from ?75° to +75°, where negative angles correspond to configurations with the heater facing downwards. It is found that the heat transfer rate increases with increasing the Rayleigh and Prandtl numbers, and the size of the heater. In addition, for negative inclinations of the enclosure the amount of heat exchanged decreases with increasing the tilting angle, while for positive inclinations the heat transfer rate either increases or decreases according as the heater is located toward the top or the bottom of the cavity. Finally, as far as the heater location is specifically concerned, the heat transfer performance has a peak for intermediate positions, the higher are the Rayleigh and Prandtl numbers, as well as the tilting angle for positive inclinations, the closer to the bottom of the cavity is the optimum heater location for maximum heat removal.     

Nonlinear model and constrained ML for removing back-to-front interferences from recto–verso documents

In this paper, we approach the removal of back-to-front interferences from scans of double-sided documents as a blind source separation problem, and extend our previous linear mixing model to a more effective nonlinear mixing model. We consider the front and back ideal images as two individual patterns overlapped in the observed recto and verso scans, and apply an unsupervised constrained maximum likelihood technique to separate them. Through several real examples, we show that the results obtained by this approach are much better than the ones obtained through data decorrelation or independent component analysis. As compared to approaches based on segmentation/classification, which often aim at cleaning a foreground text by removing all the textured background, one of the advantages of our method is that cleaning does not alter genuine features of the document, such as color or other structures it may contain. This is particularly interesting when the document has a historical importance, since its readability can be improved while maintaining the original appearance.     

Polyphasic characterization of indigenous lactobacilli and lactococci from PDO Canestrato Pugliese cheese

A polyphasic approach, involving both genotypic and phenotypic analyses was used to characterize 33 isolates of lactic acid bacteria from the raw milk Protected Designation of Origin (PDO) Canestrato Pugliese cheese, in order to select candidate strains that can be used as autochthonous starter cultures in the dairy industry. Randomly amplified polymorphic DNA (RAPD) analysis and clustering by the unweighted pair-group method with arithmetic averages (UPGMA) were used to evaluate the genotypic diversity, while phenotypic characterization was performed through miniaturized assays and traditional biochemical tests. Technological properties of major interest for cheese-making (acidification, tendency to lysis, proteolytic and peptidase activity) were also evaluated, and selected subset of data was statistically examined by the one-way ANOVA and the Tukey-Kramer HSD test, to highlight strain-specific and species-specific differences among the isolates. A high degree of diversity appeared in the phenotypic and technological traits in opposition to a relatively low genotypic diversity. Although none of the isolates showed the best performances in all the activities, an appropriate mixture of strains could be selected for providing an efficacious autochthonous starter culture.     

Public Sector Alternatives to Water Supply and Sewerage Privatization: Case Studies

The paper presents a consideration of public sector operations as an alternative to the privatization of water and sewerage services. Cross-country case studies of publicly owned enterprises which have succeeded in reconciling efficiency and social purposes and carrying out structural and managerial changes are compared with some experiences of privatized concessions. Overall, public enterprises appear no less efficient that private companies, while being capable of development-oriented consideration of public interests.     

Tetra-anionic porphyrin loading onto ZnO nanoneedles: A hybrid covalent/non covalent approach

A stepwise surface functionalization procedure, based on hybrid covalent and non-covalent approach is herein proposed to anchor tetra-anionic meso-tetrakis(4-sulfonatophenyl)porphyrin on ZnO nanorods. Carboxyalkylphosphonic acids have been proven effective to form stable self-assembled monolayers through the surface grafting of –PO₃H₂ headgroups. The exposed carboxylic functionalities are suitable for the successful grafting of cationic poly-l-lysine that drives, in water, the non-covalent anchoring of the anionic porphyrin. A stepwise surface characterization, provided by X-ray photoelectron spectroscopy, elucidates the multilayers deposition and surface composition after each process step, thus, giving interesting insights on the chemical speciation of the exposed functionalities. UV–vis spectroscopy confirms the role of ZnO morphology to increase the porphyrin loading onto the investigated surfaces. The proposed approach is effective to achieve deposition of anionic porphyrins on ZnO nanostructures and combines the robustness of covalent functionalization with the versatility and full reversibility of the non-covalent strategies.     

Effect of hemodiafiltration with endogenous reinfusion on overt idiopathic chronic inflammation in maintenance hemodialysis patients: A multicenter longitudinal study

Chronic inflammation is widely diffuse in maintenance hemodialysis (MHD) patients and is associated with poor survival. Hemodiafiltration with endogenous reinfusion (HFR) is a dialysis technique, highly biocompatible, able to adsorb proinflammatory cytokines and to decrease amino acids and antioxidants loss. These features could be helpful in MHD patients affected by idiopathic chronic inflammation, but this issue remains to be elucidated. We performed a multicenter longitudinal study to assess the effect of the switching from bicarbonate HD to HFR in patients with serum C‐reactive Protein (CRP) > 5 mg/L coupled with albumin <4.0 g/dL in the last 6 months. We enrolled 24/176 (14%) patients, of which 20 patients were assessed at 4 months and 18 completed the study. We excluded 11 patients with evident causes of inflammation. At baseline, serum levels of CRP (18.7[7.0–39.4] mg/L) and albumin (3.5[3.3–3.7] g/dL) were significantly correlated (r = ?0.49; P = 0.028). The effect on CRP and albumin was almost evident in the first 4 months and remained stable until to eighth month. A strict correlation (R = ?0.49; 0.040) between percentage change of CRP (?35%) and albumin (+14%) after 8 months of HFR. These effects were associated with the reduction of IL‐6, IL‐1β, and TNF‐α and the increment of pre‐albumin and leptin, whereas the serum levels of Branched Chain Amino Acid (BCAA) remained unchanged. In MHD patients affected by idiopathic chronic inflammation the switching from BHD to HFR is associated with improvement of inflammation. Whether these favorable effects may modify the outcomes of these high‐risk patients needs to be confirmed by studies ad hoc.     

Self‐Assembled Conjugated Thiophene‐Based Rotaxane Architectures: Structural,Computational, and Spectroscopic Insights into Molecular Aggregation

A comparative study of the self‐assembly at a variety of surfaces of a dithiophene rotaxane 1 ?β‐CD and its corresponding dumbbell, 1, by means of atomic force microscopy (AFM) imaging and scanning tunneling microscopy (STM) imaging on the micrometer and nanometer scale, respectively. The dumbbell is found to have a greater propensity to form ordered supramolecular assemblies, as a result of π–π interactions between dithiophenes belonging to adjacent molecules, which are hindered in the rotaxane. The fine molecular structure determined by STM was compared to that obtained by molecular modelling. The optical properties of both rotaxane and dumbbell in the solid state were investigated by steady‐state and time‐resolved photoluminescence (PL) experiments on spin‐cast films and diluted solutions. The comparison between the optical features of the threaded and unthreaded systems reveals an effective role of encapsulation in reducing aggregation and exciton migration for the rotaxanes with respect to the dumbbells, thus leading to higher PL quantum efficiency and preserved single‐molecule photophysics for longer times after excitation in the threaded oligomers.