Buoyant heat transport in fluids across tilted square cavities discretely heated at one side

Laminar natural convection heat transfer inside fluid-filled, tilted square cavities cooled at one side and partially heated at the opposite side, is studied numerically. A computational code based on the SIMPLE-C algorithm is used for the solution of the system of mass, momentum, and energy transfer equations. Simulations are performed for a complete range of heater sizes and locations, Rayleigh numbers based on the side of the cavity from 10³ to 10⁷, Prandtl numbers from 0.7 to 700, and tilting angles of the enclosure from ?75° to +75°, where negative angles correspond to configurations with the heater facing downwards. It is found that the heat transfer rate increases with increasing the Rayleigh and Prandtl numbers, and the size of the heater. In addition, for negative inclinations of the enclosure the amount of heat exchanged decreases with increasing the tilting angle, while for positive inclinations the heat transfer rate either increases or decreases according as the heater is located toward the top or the bottom of the cavity. Finally, as far as the heater location is specifically concerned, the heat transfer performance has a peak for intermediate positions, the higher are the Rayleigh and Prandtl numbers, as well as the tilting angle for positive inclinations, the closer to the bottom of the cavity is the optimum heater location for maximum heat removal.     

Interlaboratory study on lipid oxidation during accelerated storage trials with rapeseed and sunflower oil analyzed by conjugated dienes as primary oxidation products

Accelerated storage tests are frequently used to assess the oxidative stability of foods and related systems due to its reproducibility. Various methods and experimental conditions are used to measure lipid oxidation. Differences between laboratories make it necessary to determine the repeatability and reproducibility of oxidation tests performed under the same conditions. The objective of the present interlaboratory study was to evaluate the outcome of a storage test for two different bulk oils, sunflower oil (SFO) and rapeseed oil (RSO), during a period of 9 weeks at 20°C, 30°C, 40°C, and 60°C. Sixteen laboratories were provided with bottled oils and conducted the storage tests according to a detailed protocol. Lipid oxidation was monitored by the formation of conjugated dienes (CD) and the activation energy (E_a) was determined for comparative purposes and statistically evaluated. An increase in CD formation was observed for both oils when the storage temperature was increased in all laboratories. The E_a,1 ranged from 47.9 to 73.3 kJ mol⁻¹ in RSO and from 27.8 to 62.6 kJ mol⁻¹ in SFO, with average values of 58.2 and 46.8 kJ mol⁻¹, respectively. The reproducibility coefficients were 10.9% and 18.2% for RSO and SFO, respectively. Practical applications: In order to compare results on oxidative stability of foods derived from different studies, the reproducibility of storage tests and methods employed to evaluate the oxidation level should be considered. This study provides fundamental data on the reproducibility of lipid oxidation under accelerated storage conditions and defines important parameters to be considered for the conduction of experiments.     

A theoretical analysis of a buffer frame size conversion algorithm for audio applications ensuring minimum latency

In implementing digital signal processing (DSP) algorithms for audio real-time applications, one is frequently faced with problems regarding incompatibilities between the hardware buffer length (the internal buffer of a professional sound card) and the software buffer size imposed by the underlying algorithm (due to i.e. multirate or FFT constraints). This mismatch is solved by proper frame size conversion algorithms which inevitably introduce delay. In this context, this paper presents a buffering scheme together with a theoretical proof of the minimum delay property shown by it. Some examples derived from frequently encountered issues in DSP applications are reported.     

A Case of Double Standard: Sex Differences in Multiple Sclerosis Risk Factors

Multiple sclerosis is a complex, multifactorial, dysimmune disease prevalent in women. Its etiopathogenesis is extremely intricate, since each risk factor behaves as a variable that is interconnected with others. In order to understand these interactions, sex must be considered as a determining element, either in a protective or pathological sense, and not as one of many variables. In particular, sex seems to highly influence immune response at chromosomal, epigenetic, and hormonal levels. Environmental and genetic risk factors cannot be considered without sex, since sex-based immunological differences deeply affect disease onset, course, and prognosis. Understanding the mechanisms underlying sex-based differences is necessary in order to develop a more effective and personalized therapeutic approach.     

Novel KCND3 Variant Underlying Nonprogressive Congenital Ataxia or SCA19/22 Disrupt KV4.3 Protein Expression and K+ Currents with Variable Effects on Channel Properties

KCND3 encodes the voltage-gated potassium channel K_V4.3 that is highly expressed in the cerebellum, where it regulates dendritic excitability and calcium influx. Loss-of-function K_V4.3 mutations have been associated with dominant spinocerebellar ataxia (SCA19/22). By targeted NGS sequencing, we identified two novel KCND3 missense variants of the K_V4.3 channel: p.S347W identified in a patient with adult-onset pure cerebellar syndrome and p.W359G detected in a child with congenital nonprogressive ataxia. Neuroimaging showed mild cerebellar atrophy in both patients. We performed a two-electrode voltage-clamp recording of K_V4.3 currents in Xenopus oocytes: both the p.G345V (previously reported in a SCA19/22 family) and p.S347W mutants exhibited reduced peak currents by 50%, while no K+ current was detectable for the p.W359G mutant. We assessed the effect of the mutations on channel gating by measuring steady-state voltage-dependent activation and inactivation properties: no significant alterations were detected in p.G345V and p.S347W disease-associated variants, compared to controls. K_V4.3 expression studies in HEK293T cells showed 53% (p.G345V), 45% (p.S347W) and 75% (p.W359G) reductions in mutant protein levels compared with the wildtype. The present study broadens the spectrum of the known phenotypes and identifies additional variants for KCND3-related disorders, outlining the importance of SCA gene screening in early-onset and congenital ataxia.     

NaWuReT-Workshop: Forschung in der Reaktionstechnik für und mit der Gesellschaft

In this article, the results of the NaWuReT (Early Career Reaction Engineers) workshop on the topic “Are we doing relevant science?” are presented. The topics “(In)surmountable hurdles for Citizen Scientists in reaction engineering?” and “Circular Economy in reaction engineering with/for society?” were discussed. Therefrom, a variety of ideas and suggestions were extracted.     

Toward a better understanding of multifunctional cement-based materials: The impact of graphite nanoplatelets (GNPs)

The impact of graphite nanoplatelets (GNPs) on the physical and mechanical properties of cementitious nanocomposites was investigated. A market-available premixed mortar was modified with 0.01% by weight of cement of commercial GNPs characterized by two distinctively different aspect ratios.The rheological behavior of the GNP-modified fresh admixtures was thoroughly evaluated. Hardened cementitious nanocomposites were investigated in terms of density, microstructure (Scanning Electron Microscopy, SEM and micro–Computed Tomography, μ-CT), mechanical properties (three-point bending and compression tests), and physical properties (electrochemical impedance spectroscopy, EIS and thermal conductivity measurements). At 28 days, all GNP-modified mortars showed about 12% increased density. Mortars reinforced with high aspect ratio GNPs exhibited the highest compressive and flexural strength: about 14% and 4% improvements compared to control sample, respectively. Conversely, low aspect ratio GNPs led to cementitious nanocomposites characterized by 36% decreased electrical resistivity combined with 60% increased thermal conductivity with respect to the control sample.     

VFC-SMOTE: very fast continuous synthetic minority oversampling for evolving data streams

Data Mining and Knowledge Discovery - The world is constantly changing, and so are the massive amount of data produced. However, only a few studies deal with online class imbalance learning that...     

Chemical Characterization of Sorbitan Tri-Stearate Commercial Samples and Their Determination in Confectionery Fats by HPLC High-Resolution Mass Spectrometry

Nominal sorbitan tristearate (E492) commercial samples are widely used generally as emulsifiers and particularly as anti-bloom agents in confectionery products. In spite of this generalized use, their qualitative and quantitative evaluation is poorly documented in literature and the relative works go back to the last decades of last century. In the present work, a deep study by HPLC-High Resolution Mass Spectrometry of qualitative composition of five E492 commercial samples was made up showing a very complex pattern of stearic and palmitic acid esters with the sorbitol anhydrides, sorbitan, and isosorbide. A clear distinction of sorbitan mono-, di-, tri-, and tetra-esters, of sorbitol penta- and hexa-esters and isosorbide mono- and di-esters was achieved. Contemporarily, difference in the qualitative pattern between E492 commercial samples coming from different suppliers was established. As a consequence, quantitative evaluation can be reliably obtained by using as calibration standard the same E492 present in real samples. The accuracy and recovery of the method were determined allowing in this way a reliable application to commercial confectionery products. The detailed knowledge of STS composition may be of great help to orient the synthesis conditions in order to modulate its properties as a function of various experimental necessities.     

Methanol and proton transport through chitosan-phosphotungstic acid membranes for direct methanol fuel cell

Composite chitosan-phosphotungstic acid membranes were synthesized by ionotropic gelation. Their liquid uptake is higher for thin membranes (23 ± 2 μm), while it is lower (~70%) for thicker membranes (50-70 μm). Polarization curves recorded using single module fuel cell at 70°C allowed to estimate a peak power density of 60 mW cm⁻² by using 1 M as methanol and low Pt and Pt/Ru loadings (0.5 and 3 mg cm⁻²) at the cathode and at the anode, respectively. Electrochemical impedance spectroscopy was used to estimate the membrane conductivity and to model the electrochemical behavior of methanol electrooxidation inside the fuel cell revealing a two-step mechanism mainly responsible of overall kinetic losses. Transport of methanol inside the membrane was studied by potentiostatic measurements, allowing to estimate a methanol diffusivity of 3.6 × 10⁻⁶ cm² s⁻¹.