网络化永久性油气藏远程动态实时监测系统设计

本文设计了一种应用于油气藏永久性实时动态监测系统。该系统用光纤Bragg光栅(FBG)传感器作为井下永久性传感器,测量目的层的温度、压力等参数的模拟信号;在井口建立数据采集处理系统,将模拟信号解调成数字信号;通过GPRS无线移动通信网络传输到监测中心的数据库服务器上,并以Web形式发布到Internet网络上,同时提供移动用户浏览接口,且当数据异常时可以发送报警短消息。该系统实现了油气藏的远程实时动态监测,可以为油藏管理人员和技术人员及时、准确地做出决策提供可靠依据。     

两种网络安全协议分析与比较

对SSL／TLS和IPSec两种网络安全协议进行了研究，分析了协议的目的、特点，比较了性能、实用性和应用，并给出可能的优化途径。     

双程放大技术在光纤放大器中的应用

双程放大技术是一种高效率、低成本的实用化放大技术。本文介绍了双程放大技术的优点及在各种放大器中的应用。     

Kinetic genesis of some statistic regularities of fracture

The statistics of strength and longevity of solids has been the subject of investigation for many years. Some common regularities in fracture statistics have been experimentally revealed. These are Jhurkov's exponential and power-type longevity equations, Weibull's statistics of strength, and different types of size effect. However, the present notions on the nature of the observed statistic regularities are far from being complete. Here the object is to examine fracture statistics on the basis of a previously suggested kinetic approach. We consider the evolution of the statistical ensemble of cracks under static and steady-rate loading of a solid. The growth of an individual crack is therewith treated as a spasmodic stochastic process and presented by a time-dependent distribution density of a crack size. That function is used to construct the conditional longevity distribution with respect to the growth of an individual crack with the prescribed initial size. The final longevity distribution is found as the distribution of a minimum of conditional longevities. That procedure has been realized for both brittle and quasi-brittle cases. The obtained longevity and strength distributions were found to be in qualitative agreement with the observed statistic regularities. However, the conventional `weak link concept' and proposals for the statistics of dangerous defects are in conflict with the obtained results. It is moreover shown that, within the limits of the wide-spread concept, Jhurkov's longevity equation and Weibull's statistics of strength are mutually exclusive. Although the results were obtained from simple models, there is a good probability of kinetic origin for the basic statistic regularities of fracture.     

低价硫化铝法从氧化铝直接炭还原制铝的动力学研究

低价硫化铝法从氧化铝直接炭还原制铝的动力学过程极为复杂,过程的前期受界面化学反应控制,过程后期受扩散过程控制,并求得不同时期的活化能,反应前期:E1=63.81 kJ/mol(6.67 Pa)、E2=50.82 kJ/mol(66.7 Pa)、E3=54.72 kJ/mol(666.7 Pa)、E4=39.61 kJ/mol(1333 Pa);反应后期:E*1=112.90 kJ/mol(6.67 Pa)、E*2=89.92 kJ/mol(66.7 Pa)、E*3=97.32 kJ/mol(666.7 Pa)、E*4=51.83 kJ/mol(1333 Pa).从动力学的角度提出了反应的较佳条件.温度、真空度的提高一方面可增大反应速率,但另一方面却加大了硫化铝的挥发,仅从增大速率而言,温度应大于1100 ℃,真空度应优于1333 Pa为宜.     

一个面积和功耗优化且适用于10/100 Base-T以太网的CMOS时钟恢复电路

提出了一个新的用于10 / 10 0 Base- T以太网中面积和功耗优化的时钟恢复电路.它采用双环路的结构,加快了锁相环路的捕获和跟踪速度;采用复用的方式,通过选择信号控制电路可分别在10 Mbps或10 0 Mbps模式下独立工作且能方便地实现模式间的互换,与采用两个独立的CDR电路相比节省了一半的面积;同时,电路中采用一般的延迟单元来取代DL L,并能保证环路性能不随工艺温度等条件引起的延迟单元、延迟时间的变化而变化,从而节省了功耗.Hspice模拟结果显示,在Vdd=2 .5 V时,10 0 Mbps模式下电路的功耗约为75 m W,稳态相差为0 .3 ns;10 Mbps模式时电路功耗为5 8m W     

纳米Fe2O3对镁铬耐火材料烧结及力学性能的影响

在镁铬耐火材料中添加纳米Fe2O3,研究了它对镁铬耐火材料烧结性能与常温力学性能的影响.结果发现,在相同的工艺条件下,加入1%(外加)的纳米Fe2O3即可使镁铬砖的烧成温度降低150℃左右,并在相同烧成温度下能使试样的常温抗折强度和耐压强度大幅度提高.分析认为,在镁铬耐火材料中添加少量纳米级Fe2O3,可促进MgO-FeO固溶体中Cr3+和Al3+含量的提高,增强镁铬砖的直接结合程度,从而提高其力学性能.     

导流能力测试系统的研制

压裂后裂缝的导流能力直接关系着压裂缝的渗流能力，是客观评价压裂效果的重要指标之一。文章介绍了基于AT89C52单片机的导流能力测试系统的系统要求、测试原理以及其设计方案，阐述了各个测控通道，给出了测控系统电路方框图。     

五号桩—长堤地区沙河街组砂体储集性及控制因素研究

沙河街组是沾化凹陷东部五号桩-长堤地区重要的储油层系，主要目的层段为沙三段和沙二段。沙三段和沙二段主要发育有浊积扇、水下冲积扇和滩坝沉积体系，在浊积扇、水下冲积扇中发育辫状水道、扇中前缘、辫状水道间以及扇根、扇缘等沉积微相类型，其中辫状水道、扇中前缘砂体物性好，原生孔隙及次生孔隙均较发育，辫状水道间以及扇根砂体物性较差。其储集特征主要受岩性、沉积微相、成岩作用等因素控制，结合该地区实际情况，将沙二段、沙三段储集层划分为好、中、差3种类型。图4表1参7