A radix-8 wafer scale FFT processor

Wafer Scale Integration promises radical improvements in the performance of digital signal processing systems. This paper describes the design of a radix-8 systolic (pipeline) fast Fourier transform processor for implementation with wafer scale integration. By the use of the radix-8 FFT butterfly wafer that is currently under development, continuous data rates of 160 MSPS are anticipated for FFTs of up to 4096 points with 16-bit fixed point data.     

离子束混合工艺对材料抗蚀性能的影响

本文介绍了离子束混合工艺方法。与直接注入相比较,离子束混合所使用的设备造价低1/4—1/2,而生产效率可提高1—2个数量级,因而使生产成本大幅度降低,这无疑对离子束工艺的实际应用将产生巨大的促进作用。 通过对轴承材料(GCr15和Cr4Mo4V)经Cr、N、Ta不同元素的混合处理后,在0.5M H_2SO_4和0.1M NaCl的缓冲溶液中的阳极极化曲线表明经混合处理后的两种材料试样,其抗蚀能力和抗点蚀能力均大大提高,这与直接注入的试样效果是一致的。 通过俄歇谱仪和透射电镜的分析结果表明混合是成功的,且在一定的条件下,形成非晶组织。 本文的结论是,无论是离子的直接注入还是离子束混合,对提高轴承材料的抗腐蚀性能都是有效的方法,特别是离子束混合技术具有更大的应用前景。     

Orientation-based unique representation for planar curves and shapes

This paper presents an orientation-based representation for planar curves and shapes. The new representation can uniquely represent all types, of planar shapes, be it convex, nonconvex, polygonal, smoothly curved, or piecewise smooth shapes. It is based on a new parameterization, theabsolute integral orientation. This representation is invariant under translation and rotation. The absolute integral orientation is a parameter invariant under scaling. As a result, matching of similar shapes (i.e., determination of the relative orientation and the scaling factor) using the absolute integral orientation as the parameter is easier than using the arclength as the parameter. In addition, the new representation has the feature of adaptive sampling, making it more compact and efficient than arc-length-based representations.     

Evaluating the design of flexible manufacturing systems

Evaluating the design of flexible manufacturing systems is complex. Developing a measure of performance useful for evaluating alternate designs continues to be interesting. Here, total productivity of the system is proposed as an appropriate measure. Specification of parameters based upon strategic considerations for this measure are discussed. Finally, the usefulness of the measure is demonstrated through an example.     

复杂不规则刚体转动惯量的测试原理和方法

为了测量复杂不规则刚体转动惯量，采用时间常数法，通过A/D卡PS2129的定时/计数器8253高精度测速、计时，能较好地应用于测量转动惯量。     

山西铝厂锅炉水冷壁膨胀异常原因分析及对策

针对山西铝厂160t／h锅炉在实际运行中膨胀异常的问题，对不同的施工方法下，水冷壁膨胀量是否正常这一问题进行分析，找出了水冷壁膨胀异常的原因，并提出了解决对策。     

空调器用风冷冷凝器换热能力实验研究

实验测定了几种不同铜管、肋片组合的冷凝器在不同的风量和风机转速下的换热量，发现采用内螺纹铜管和迎风侧平片、背风侧冲缝片的冷凝器具有最优的换热性能。分析了多流路冷凝器中不同流路之间的制冷剂分配不均匀性和再热现象。     

Large-scale quantum mechanical simulations of high- Z metals

High-Z metals constitute a particular challenge for large-scale ab initio electronic-structure calculations, as they require high resolution due to the presence of strongly localized states and require many eigenstates to be computed due to the large number of electrons and need to accurately resolve the Fermi surface. Here, we report recent findings on high-Z metals, using an efficient massively parallel planewave implementation on some of the largest computational architectures currently available. We discuss the particular architectures employed and methodological advances required to harness them effectively. We present a pair-correlation function for U, calculated using quantum molecular dynamics, and discuss relaxations of Pu atoms in the vicinity of defects in aged and alloyed Pu. We find that the self-irradiation associated with aging has a negligible effect on the compressibility of Pu relative to other factors such as alloying. The US Goverment’s right to retain a non-exclusive, royalty-free license in and to any copyright is acknowledged.     

ZnSe棱镜折叠波导CO_2激光器的研究

研制了使用ZnSe棱镜折叠的波导CO_2激光器,提出一种CO_2激光—He-Ne激光调整光路的方法,并获得了该种折叠激光器的振荡。进一步的改进可以提高其输出功率而得到实用性的器件。     

三峡工程建设中若干重大技术问题的突破

三峡工程规模巨大，技术复杂。文章介绍了三峡工程建设在大江截流和混凝土防渗墙施工技术、大坝混凝土快速施工新技术、船闸高边坡施工技术、电站大型钢衬钢筋混凝土压力管道和蜗壳保温保压技术、沥青混凝土心墙、船闸金属结构、水轮发电机组等重大技术问题上的突破。