K0.9Li0.1（Ta0.5Nb0.5）O3晶体压电应变系数的测量

用准静态ｄ＿（３３）测量仪和干涉法相结合。测量了Ｋ＿（０．９）Ｌｉ＿（０．１）（Ｔａ＿（０．５）Ｎｂ＿（０．５）Ｎｂ＿（０．５））Ｏ＿３晶体的压电应变系数。结果为：ｄ＿（３３）＝８６．０，ｄ＿（３３）＝一２９．５，ｄ＿（１５）＝１１２．９×１０￣（－１２）Ｃ／Ｎ．     

Preparation and characterization of polyurethane microcapsules containing n‐octadecane with styrene‐maleic anhydride as a surfactant by interfacial polycondensation

A series of polyurethane microcapsules containing a phase change material (PCM) of n‐octadecane was successfully synthesized by an interfacial polymerization in aqueous styrene‐maleic anhydride (SMA) dispersion with diethylene triamine (DETA) as a chain extender reacting with toluene‐2,4‐diisocyanate (TDI). The average diameter of microPCMs is in the range of 5–10 μm under the stirring speed of 3000–4000 rpm. Optical and SEM morphologies of microPCMs had ensured that the shell was regularly fabricated with the influence of SMA. FTIR results confirmed that the shell material was polyurethane and the SMA chains associated on core material reacted with TDI forming a part of shell material. The shell thickness was decreasing in the range of 0.31–0.55 μm with the molar ratio of DETA/TDI from 0.84 to 1.35 and the weight of core material increasing from 40 to 80% (wt %). By controlling the weight ratio of PCM as 40, 50, 60, 70, and 80% in microPCMs, it was found using DSC that the T_m and T_c of microPCMs were in the range of 29.8–31.0^oC and 21.1–22.0°C and an obvious phase change had been achieved nearly the same temperature range of that of PCM. The results from release curves of microPCM samples prepared by 1.4, 1.7, and 2.0 g of SMA indicated the release properties were affected by the amount of the dispersant, which attributed to the emulsion effect and shell polymerization structure. The above results suggest that the shell structure of microPCMs can be controlled and the properties of microPCMs determined by shell will perform proper practical usage. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4996–5006, 2006     

新型细粒煤分选设备的研究及应用

提出了一种新的细粒煤分选设备,主要介绍了它的结构模型、数学模型、动力学分析以及在贵州老屋基、孝义东兴、山西五阳、黑龙江七台河矿务局等洗煤厂中在煤泥脱水回收作业中的应用,取得了较好的效果。尤其用于简易选煤厂,从煤泥水中回收低灰精煤,既解决了环保污染问题,又取得了较高的经济效益,因而倍受欢迎。     

方波扫描路径确定声源声功率误差特性分析

改进了矩形测量面方波扫描路径测量声功率的误差模型 ,以单极子、偶极子及四极子声源为例 ,给出了扫描方向、测量面离声源的距离及扫描线的密度的选取对理论误差的分布图形。分析结果表明 :对选定的测量面 ,在扫描线密度小的情况下 ,通过调整声源离测量面的距离 ,可以在声源近处找到一个最优点或较优点 ,使理论误差为零或很小 ;在绝大多数情况下 ,沿测量面长边扫描误差比沿短边扫描小。     

数据挖掘技术在大坝安全决策支持系统中的应用

数据挖掘技术是一个新兴的，具有广阔应用前景和极富挑战性的研究领域。在充分研究大坝安全决策支持系统的基础上，结合数据挖掘技术的概念与方法等，对数据挖掘技术在大坝安全决策支持系统中的应用进行论述，与此同时，运用数据挖掘技术分析了某大坝垂直位移测值突变的物理成因。     

The Effects of Filtered Channel Quality Feedback on Throughput of Proportional Fair Algorithm

1　IntroductionSchedulingalgorithmsarewidelystudiedforwirelesspacketdatasystems,whichgenerallyhavetwobasiccategories,oneisoptimizedforsystemthroughputandfairness[1～ 2 ] ,andtheotherisforthequalityofservice[3～6] .Forsystemswherepack etdataaretimedivisionmultiplexedacrossusersonthedownlink ,orfromBaseStation (BS)tomultipleMobileStations(MS) ,theBSusesschedulingalgo rithmstodecidewhichuseristransmittedto .ItisindicatedinRefs.[7,8]thatschedulingonlyoneus eratatimeisoptimalfromthepointofviewo…     

添加CaF2-YF3的AlN陶瓷的热导率

用CaF2和YF3做添加剂，在1750℃制备了热导率高于170W/m.K的的AlN陶瓷，并用XRD和SEM研究了AlN陶瓷在烧结过程中的相组成，微结构以及晶格参数的变化，并讨论了其对热导率的影响，研究发现，当使用CaF2-YF3做添加剂时，微结构差异对AlN陶瓷热导率的影响很小，AlN陶瓷的热导率主要由AlN晶格氧缺陷浓度决定，由于CaF2-YF3能有效降低AlN颗粒表面的氧含量，从而有利于获得高的热导率。     

Effect of nitrocarburizing on sulphide layer during nitrocarburizing-sulphurating treatment

Compared with the single sulphurating treatment, the duplex treatment of nitrocarburizing-sulphurating can more effectively improve the properties of steel such as friction-reducing, wear resistance and anti-scuffing. Under the same processing parameters, the sulphide layers were fabricated on the surface of CrMoCu alloy cast iron by single ion-sulphurating treatment and nitrocarburizing-sulphurating duplex treatment, respectively. Through the analysis of the sulphide, the effect of the nitrocarburizing on the fabrication of the sulphide layer was investigated. And the result shows that the fabrication of sulphide layer is promoted by the nitrocarburizing treatment.     

大港油田CNG加气站技术特点

天然气作为我国最主要能源之一，其应用领域在不断地扩展。由于天然气受管网敷设的限制。在压缩、储运等方面的技术也引起了众多企业的重视，并成为一些企业发展的战略目标。2004年大港油田依靠地域和气源的优势，建成了天津市首座CNG加气站。经过一年来的生产运行，显现出较好的经济效益和良好的发展前景。从环保性、安全性和经济性等方面阐述了CNG技术特点和发展的优势，对大港油田已建CNG加气站的主要设备、工艺流程、技术特点以及市场发展前景进行了较详尽的阐述。     

一种数字语音通信系统的DSP实现

介绍了一种甚低频低码率数字通信系统的实现方案，该方案中的软件采用混合编程的方法，硬件则用DSP实现，文章给出了整个系统的DSP软硬件调试方法，并通过调试结果表明该方案具有很好的可行性和实时性。