Synthesis,characterization and charge transport properties of Pr–Ni Co-doped SrFe2O4 spinel for high frequency devices applications

Ferrites are materials of interest due to their broad applications in high technological devices and a lot of research has been focused to synthesize new ferrites. In this regard, an effort has been devoted to synthesize spinel Pr–Ni co-substituted strontium ferrites with a nominal formula of Sr_1-xPr_xFe_2-yNi_yO₄ (0.0 ≤ x ≤ 0.1, 0.0 ≤ y ≤ 1.0). The cubic structure of pure and Pr–Ni co-substituted strontium ferrite samples calcinated at 1073 K for 3 h has been confirmed through X-ray diffraction (XRD). Average sizes of crystallites (18–25 nm) have been estimated from XRD analysis and nanometer particle sizes of synthesized ferrites have been further verified by scanning electron microscopy (SEM). SEM results have also shown that particles are mostly agglomerated and all the samples possess porosity. It has been observed that at 298 K, the values of resistivity (ρ) increase, while that of AC conductivity, dielectric loss, and dielectric constants decrease with increasing amounts of Pr³⁺ and Ni²⁺ ions. The values of dielectric parameters initially decrease with frequency and later become constant and can be explained on the basis of dielectric polarization. Electrochemical impedance spectroscopy (EIS) studies show that the charge transport phenomenon in ferrite materials is mainly controlled via grain boundaries. Overall, synthesized ferrite materials own enhanced resistivity values in the range of 1.38 × 10⁹–1.94 × 10⁹ Ω cm and minimum dielectric losses, which makes them suitable candidates for high frequency devices applications.     

Variable toroidal ferrite phase shifter

Careful design of the magnetic bias circuit used in ferrite phase shifters can help to reduce space, weight and energy consumption. Low reluctance circuits must avoid air-gaps and this can be achieved using toroidal-shaped ferrite inserts positioned inside a rectangular waveguide. Here, these ferrite inserts are fabricated using a viscous plastic processing method that avoids machining and produces a continuous magnetic circuit. Finite-element methods are used to initially model the magnetostatic solution for the bias circuit before being used to analyse the microwave performance of a double toroid phase shifter. A closedform technique is introduced to model the dielectric slab waveguide impedance transformer. The final insertion loss was ,1 dB over the 9.5?10.3 GHz band and return loss of 20 dB was achievable. The phase shift calculation agrees to within 10% of the measured values.     

Leprosy patients with lepromatous disease recognize cross-reactive T cell epitopes in the Mycobacterium leprae 10-kD antigen

BACKGROUND: Cough associated with gastroesophageal reflux (GER) may originate in extrathoracic airway receptors made hypersensitive by acid-induced mucosal injury. OBJECTIVE: We investigated the role of laryngeal disease and dysfunction in the pathogenesis of GER-associated cough in nonasthmatic patients. METHODS: Seven patients with GER-associated cough were compared with 7 patients with GER but no cough. The patients underwent fiberoptic endoscopy for assessment of laryngitis and esophagitis (expressed by scores); esophageal manometry; 24-hour pH monitoring; lung function tests; and histamine inhalation challenge with assessment of bronchial threshold (concentration provoking 10% fall in FEV1 [PC10]), extrathoracic airway threshold (concentration provoking 25% fall in the maximal midinspiratory flow [PC25MIF50]), and cough threshold (concentration provoking 5 or more coughs PCcough). The patients were reevaluated after 3 months of medical treatment for GER. RESULTS: Patients with cough, compared with those without cough, had significantly higher laryngitis scores (P = .002), lower esophageal sphincter pressures, longer time with pH below 4 (P = .003), greater number of episodes of reflux longer than 5 minutes (P = .016), longer esophageal clearance time (P = .048), and significantly lower PC25MIF50 (P = .005) and PCcough (P = .008) values. Laryngitis score was significantly inversely related to either PCcough (P < .001) or PC25MIF50 (P <.01) but not to PC10. Laryngitis score, PC25MIF50, and PCcough were all closely related to GER severity. After GER treatment, laryngitis, PC25MIF50, and PCcough were all significantly improved. CONCLUSIONS: These findings suggest that GER-associated cough is strongly associated with laryngeal disease and dysfunction consequent to acid reflux injury in nonasthmatic patients.     

Evaluation of skin- versus teeth-attached markers in wireless optoelectronic recordings of chewing movements in man

This study evaluated the applicability of skin- and teeth-attached reflex markers fixed to the mandible and the head for optoelectronic recording of chewing movements. Markers were attached to the upper and lower incisors and to the skin on the forehead, the bridge of the nose, the tip of the nose and the chin in seven subjects. Chewing movements were recorded in three dimensions using a high-resolution system for wireless optoelectronic recording. Skin markers were systematically displaced due to skin stretch. The largest displacement was observed for the chin marker, whereas minor displacement was found for markers located on the forehead and the bridge of the nose. In repeated recordings, the smallest intra-individual variation in displacement was found for the marker on the bridge of the nose. In spite of relatively large displacement for the chin marker, the temporal estimates of the mandibular movement were not affected. Teeth markers were found to significantly increase the vertical mouth opening, although the duration of the chewing cycle was unaffected. This indicates an increase in chewing velocity. We suggest that markers located on the bridge of the nose are acceptable for recordings of chewing movements. Skin markers on the chin can be reliably used for temporal analysis. They are also acceptable for spatial analysis if an intra-individual variability of 2 mm is allowed. Teeth-attached markers may significantly influence the natural chewing behavior. Thus, both types of marker systems have advantages as well as disadvantages with regard to the accuracy of the chewing movement analysis. Selection of a marker system should be based on the aims of the study.     

Homology modeling of rho-crystallin from bullfrog (Rana catesbeiana) lens

rho-Crystallins are major protein component found in the eye lenses of frogs of the genus Rana. Structural analysis has indicated that frog rho-crystallins belong to aldo-keto reductase superfamily (AKRs) which include aldehyde and aldose reductases, prostaglandin F synthase and several detoxification enzymes. Members of AKRs catalyze the oxidation-reduction reaction over a range of substrates using NAD(P)(H) as a cofactor. In spite of higher structural similarity with AKRs and cofactor binding affinity, the rho-crystallins were found to be catalytically inactive. This study presents comparative or homology modeling of rho-crystallin from bullfrog (Rana catesbeiana) in presence and absence of cofactor NADP and a competitive inhibitor, testosterone. The predicted models are explored to examine the catalytic cleft, cofactor binding affinity characteristics and substrate binding pocket.     

Addendum to ‘(Singular) state models and (singular) LTID systems’

In this note, a construction of state representations of singular linear time-invariant differential systems is described directly in terms of trajectories.     

Cumulative frequency distribution of solar insolation at Quetta, Pakistan

An inverse Gaussian relationship between percentage cumulative frequency and energy (in MJ/m²/day) is obtained from solar insolation data of Quetta, Pakistan.     

Vibrations of functionally graded cylindrical shells based on elastic foundations

In this paper, a study on the vibrations of functionally graded cylindrical shells based on the Winkler and Pasternak foundations is presented. The shell equations are amended by inducting the moduli of the Winkler and Pasternak foundations. The wave propagation method is employed to solve the shell dynamical equations. The method is based on the approximate eigenvalues of characteristic beam functions. The validity and accuracy of the present approach are verified by a number of comparisons.     

Bacteriological Evaluation of Gingival Crevicular Fluid in Teeth Restored Using Fixed Dental Prostheses: An In Vivo Study

The present in vivo study determined the microbiological counts of the gingival crevicular fluid (GCF) among patients with fixed dental prostheses fabricated using three different techniques. A total of 129 subjects were divided into three study groups: first, cobalt-chrome-based, metal-ceramic prostheses fabricated by the conventional method (MC, n = 35); the second group consisted of cobalt-chrome-based, metal-ceramic prostheses fabricated by the computer-aided design and computer-aided manufacturing (CAD/CAM) technique (CC-MC, n = 35); the third group comprised zirconia-based ceramic prostheses fabricated using the CAD/CAM technique (CC-Zr, n = 35). The control consisted of 24 patients using prostheses fabricated with either MC, CC-MC, or CC-Zr. The GCF was obtained from the subjects before treatment, and 6 and 12 months after the prosthetic treatment. Bacteriological and bacterioscopic analysis of the GCF was performed to analyze the patients’ GCF. The data were analyzed using SPSS V20 (IBM Company, Chicago, IL, USA). The number of microorganisms of the gingival crevicular fluid in all groups at 12 months of prosthetic treatment reduced dramatically compared with the data obtained before prosthetic treatment. Inflammatory processes in the periodontium occurred slowly in the case of zirconium oxide-based ceramic constructions due to their biocompatibility with the mucous membranes and tissues of the oral cavity as well as a reduced risk of dental biofilm formation. This should be considered by dentists and prosthodontists when choosing restoration materials for subjects with periodontal pathology.