1,5-glucono-δ-lactone-induced gelation of myofibrillar protein at chilled temperatures

In this study 1,5-glucono-δ-lactone was used to achieve acid-induced gelation of myofibrillar proteins at 4 °C. The characteristics of the myofibrillar gels were investigated by measuring Young's modulus and springiness. The effects of addition of sodium chloride and tetrasodium pyrophosphate on gel characteristics were also studied. Sodium chloride increased the Young's modulus of myofibrillar protein gels in the presence and absence of 1,5-glucono-δ-lactone, while tetrasodium pyrophosphate had no observable effect on the gels until the pH decreased to 4.1, when the Young's modulus was enhanced.     

辽宁省广播电视内容智能监测系统介绍

介绍在当前广播电视发展的情况下,如何采用高新技术对广播电视播出内容进行高效、准确、全面的监测和管理,着重介绍在现有的网络基础上采用特征提取及比对技术搭建能够满足广播电视内容监测要求的智能监测系统以及该系统能够实现的功能。     

Mimo radar imaging model and algorithm

Based on the array architecture of multiple transmitting/receiving antennas, Multi-Input Multi-Output (MIMO) radar provides a new mechanism for radar imaging technology. In order to explore the processing approach to this imaging mechanism, the two dimensional (2D) imaging model of MIMO radar is established first, and the spatial sampling ability is analyzed from the concept of spatial convolution of the antenna elements. The target spatial spectral filling format of MIMO radar with monochromatic transmitting signal is described. High-resolution imaging capability of MIMO radar is analyzed according to spatial spectral coverage and the corresponding imaging algorithm is presented. Finally, field imaging experiment is used to demonstrate the superior imaging performance of MIMO radar.     

Modeling Energy Recovery Using Thermoelectric Conversion Integrated with an Organic Rankine Bottoming Cycle

Engine and industrial waste heat are sources of high-grade thermal energy that can potentially be utilized. This paper describes a model system that employs thermoelectric conversion as a topping cycle integrated with an organic Rankine bottoming cycle. The model has many parameters that define combined system quantities such as overall output power and conversion efficiency. The model can identify the optimal performance points for both the thermoelectric and organic Rankine bottoming cycle. Key analysis results are presented showing the impact of critical design parameters on power output and system performance.     

Constant Impedance TEM Horn Antenna: Aperture and Characteristic Impedance’s Impacts on Axial Electric Field

TEM horn antenna with constant characteristic impedance (CCI TEM horn antenna) is a widely used ultra-wideband (UWB) antenna. Considering the peak-to-peak value of the axial electric field (V_pp), how to design such antenna’s characteristic impedance (Z _c) has not been involved in previous research. The relationship between V_pp and antenna aperture as well as characteristic impedance is numerical analyzed. The simulation and experimental results show that the optimal aperture is existed to maximize V_pp when the antenna’s length is fixed at the axis. More over, V_pp of the antenna with optimal aperture reaches the maximum value when the characteristic impedance is 280 ohm.     

Effect of Colloidal Silver on Optical Transmittance Characteristics of Bulk Cadmium Zinc Telluride Crystals

Colloidal silver is observed to affect the transmittance of p-type Cd_1−y Zn _y Te (CZT) single-crystal substrate material at room temperature. The optical transmittance spectra have been analyzed in the near-infrared (NIR) and mid-infrared (MIR) regions. The transmittance characteristics of CZT showed significant reduction in absorption due to split-off valance band transitions in the NIR region and intervalence band absorption in the MIR region upon coating CZT substrates with silver paste. This reduction in absorption has been explained to be due to the compensation of the acceptor defects (native and foreign). Silver atoms incorporated from the silver coating help in compensation of these defects. A similar effect on transmittance characteristics of mercury cadmium telluride (MCT) epilayers grown on CZT substrates after coating silver paste on the CZT substrate side was also observed. An improvement in the transmittance of CZT substrates after the application of silver paste was observed. A similar improvement in transmittance is usually achieved by annealing the substrates in a Cd/Zn atmosphere. The results are explained by considering the formation of neutral complexes of acceptors (cadmium vacancies) and the interstitial silver. This study also points to the important conclusion that silver paste on CZT should be applied with caution for measurement purposes since it diffuses even at room temperature and modifies the optical characteristics.     

起爆环半径对多定向破片战斗部参数的影响

起爆方式对爆炸成型多定向破片（MDF）战斗部的形成过程和形态具有重要影响。在深刻理解MDF战斗部爆炸成型机理的基础上,通过对药型罩由切割网栅形成多个破片过程的仿真和爆轰波作用理论分析,研究了环起爆方式下起爆环半径对MDF战斗部参数的影响。研究表明：随着起爆环半径的增加,切割药型罩形成的MDF头部破片速度随之增大,但破片的剩余质量将会减小,而破片的发散角则随起爆环半径的增加呈现先增大再减小的趋势;对于特定的MDF战斗部,当起爆环半径在8～12 mm时,破片的侵彻能力和对目标的毁伤作用效果最好。     

Thermoelectric Properties of NaCo<Subscript>2–<Emphasis Type="Italic">x</Emphasis></Subscript>Fe<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>

NaCo₂O₄ has one of the highest figures of merit among all ceramic thermoelectric materials. Because of its large thermopower and low resistivity, the ceramic oxide NaCo₂O₄ is a promising candidate for potential thermoelectric applications. NaCo₂O₄ is, moreover, a ceramic compound with high decomposition temperature and chemical stability in air and it does not contain any toxic elements. Like all 3-d transition ions, Co ions have multiple spin and oxidation states. In this investigation, thermopower and electrical conductivity of NaCo₂O₄ as a function of substitution of Co by Fe ions were measured. Fe substitution for Co causes resistivity to increase, whereas the Seebeck coefficient remained nearly invariant, especially above 330 K. An erratum to this article can be found at     

Properties of Indium-Doped ZnO Films Prepared in an Oxygen-Rich Plasma

Indium-doped zinc oxide (ZnO:In) films were prepared in an Ar:O₂ plasma by reactive magnetron sputtering. The x-ray diffraction (XRD) patterns presented the crystal structures of ZnO:In films, while transmission spectra and photoluminescence (PL) spectra showed the changed band gap and the visible emission from defects, as compared to the PL spectra of undoped ZnO films. It was concluded that the increase of substrate temperature enhanced the crystal quality of ZnO:In films; the incorporation of In made the c-axis constant of the samples larger than that of undoped ZnO films; the blue emission was due to the transition from an unknown donor level by indium doping to the valance band; and the orange-green emission originated from acceptor defects (O_Zn) formed in the O-rich plasma. Meanwhile, the current- voltage characteristics and persistent photoconductivity phenomenon also could be explained by the increased acceptor defects (O_Zn) that formed when the substrate temperature was increased.     

Numerical Optimization of an Active Voltage Controller for High-Power IGBT Converters

Feedback control of insulated gate bipolar transistors (IGBTs) in the active region can be used to regulate the device switching trajectory. This facilitates series connection of devices without the use of external snubber networks. Control must be achieved across the full active region of the IGBT and must balance a number of conflicting system goals including diode recovery. To date, the choice of control parameters has been a largely empirical process. This paper uses accurate device models and formalized optimization procedures to evaluate IGBT active voltage controllers. A detailed optimization for the control of IGBT turn-on is presented in this paper