Evaluation of Fracture Mechanisms in Al-Si Metal Matrix Nanocomposites Produced by Three Methods of Gravity Sand Casting,Squeeze Casting and Compo Casting in Semi-Solid State

Silicon - Magnetic stirring is considered to be the most useful stirring method in semi-solid casting processes which doesn’t have the restrictions of the mechanical stirring. In this...     

The Acute Toxicity of SiO2 and Fe3O4 Nano-particles on Daphnia magna

Silicon - SiO2 nano-particles are applied in different industries such as ceramic producing, glass making, cosmetic products, medicines, magnetic mixtures, heat and electric insulators and glazing...     

Loading Metformin/Nettle Extract Lamium album L. subsp. Crinitum in Porous Hollow Silica Nanoparticle Coated by the Layer-by-Layer Method

Silicon - Metformin (MF) and L. albuman are used to treat type 2 diabetes. Diabetes causes problems such as blindness and albumin excretion. In this study, metformin, L. albuman and a composition...     

Plasticized poly(vinyl chloride) composites: Influence of different nanofillers as antimigration agents

In this study, plasticized poly(vinyl chloride) (PVC) composites with different nanofillers, including single‐walled carbon nanotubes (SWCNTs), organoclay, TiO₂, and ZnO nanoparticles, were prepared, and their effects on plasticizer migration were investigated. Scanning electron micrographs revealed the dispersion quality of the nanofillers in the polymer matrix. It had a significant influence on the performance of the nanofillers in the process of plasticizer migration. Migration and exudation tests showed that the nanofillers could efficiently hinder plasticizer migration. On the basis of these results, we concluded that carbon nanotubes were the best antimigration agent in the plasticized system. This was ascribed to the high aspect ratio of the SWCNTs and the good interactions between them and the plasticizer. Also, TiO₂ nanoparticles showed a better performance compared to the ZnO nanoparticles. This was due to the more homogeneous dispersion of the TiO₂ in the polymer matrix and the higher surface area of the particles. The differential scanning calorimetry thermograms were in good agreement with the migration tests. The lowest change in the glass‐transition temperature was observed for the composite filled with SWCNTs. This indicated that a lower amount of the plasticizer migrated from PVC. The thermogravimetric analysis curves showed that the incorporation of the nanofillers improved the thermal stability of the PVC. The results could be useful for determining the efficiency of plasticized PVC in applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42559.     

A Modified Method for the Determination of N‐Nitrosodiethanolamine in Coconut Diethanolamide Using HPLC with Dual‐Wavelength UV–Vis Detector

A simple and novel method based on high‐performance liquid chromatography with dual‐wavelength ultraviolet detection at 234 and 254 nm has been developed for the determination of underivatized N‐nitrosodiethanolamine in coconut diethanolamide. The correlation coefficient obtained shows that the method is correct.     

The odontogenic differentiation of human dental pulp stem cells on hydroxyapatite-coated biodegradable nanofibrous scaffolds

The authors aimed to design nanofibrous (NF) scaffolds that facilitate odontogenic and osteogenic differentiation of human dental pulp-derived mesenchymal stem cells (DPSCs) in vitro. For this purpose, hydroxyapatite (HA)–loaded poly (L-lactic acid)/poly (?-caprolactone) (PLLA:PCL 2;1) blend NFs were prepared using the electrospinning method. Alizarin red activity and cell viability were evaluated by MTT assay, and SEM revealed the proliferation properties of NF scaffolds. QRT-PCR results demonstrated that HA-loaded PLLA/PCL can lead to osteoblast/odontoblast differentiation in DPSCs through the up-regulation of related genes, thus indicating that electrospun biodegradable PCL/PLA/HA has remarkable prospects as scaffolds for bone and tooth tissue engineering.     

Synthesis and characterization of novel biodegradable water dispersed poly(ether-urethane)s and their MWCNT-AS nanocomposites functionalized with aspartic acid as dispersing agent

New biodegradable poly(ether-urethane)s (PEU)s were synthesized via the reaction of L-leucine anhydride cyclo-peptide, polyethylene glycol-1000 and hexamethylene diisocyanate. Then, they were end-functionalized with aspartic acid (AS) as a dispersing agent and were dispersed in water. MWCNTs were also functionalized by AS under microwave irradiation. Polymer/MWCNT-AS composites and polymer/MWCNT-AS water dispersed composites were prepared through an ultrasound-assisted method. We have designed these PEUs with two different structural architectures (PA1and PA2) which can be readily dispersed in water (PA1-D and PA2-D). The structure and properties of the polymers, MWCNTs-AS and PEUs/MWCNTs-AS composites were investigated by FTIR and NMR spectroscopy methods and FE-SEM, TEM and TGA techniques. The particle sizes of the resulting PA1-D and PA2-D dispersions were in the range of 200–300 nm. The results showed that by increasing MWCNT-AS loading, the degradation rate and particle sizes of the dispersed composites decreased, while thermal stability and dispersion stability of the composite systems increased. The degradation tests of polymers and their composites in PBS at 37 °C after 10 days showed weight losses ranging from 23 to 44 and 17–37%, respectively. The cytotoxicity study of polymers using the direct-contact test on L929 mouse fibroblast cell line showed no toxicity. Other properties such as thermal stability, dispersion’s particle size, degradation rate and morphology of the composites were studied, and the effect of simultaneous dispersion of MWCNTs-AS and PEUs in water on the properties of the resulting mixtures was studied. We suggest that these polymers have tunable properties which may potentially be considered for drug carriers’ studies.     

Preparation and Characterization of Polyvinylpyrrolidone-functionalized Multiwalled Carbon Nanotube (PVP/f-MWNT) Nanocomposites

Polyvinylpyrrolidone/hydroxyl-functionalized multiwalled carbon nanotube and sulfonyl-functionalized multiwalled carbon nanotube nanocomposites were prepared in aqueous media. The structure, morphology, and thermal characterization of the prepared nanocomposites were done by Fourier transform infrared, scanning electron microscopy, thermogravimetric analysis, and differential scanning calorimetry techniques. The polyvinylpyrrolidone/hydroxyl-functionalized multiwalled carbon nanotube and polyvinylpyrrolidone/sulfonyl-functionalized multiwalled carbon nanotube nanocomposites improved the thermal properties of polyvinylpyrrolidone. According to the differential scanning calorimetry analysis, the glass transition temperature of 101.6 and 84.6°C is observed for the polyvinylpyrrolidone/hydroxyl-functionalized multiwalled carbon nanotube (5% w/w) and polyvinylpyrrolidone/sulfonyl-functionalized multiwalled carbon nanotube (5% w/w) nanocomposites, respectively. The energy-dispersive X-ray spectroscopy image of polyvinylpyrrolidone/sulfonyl-functionalized multiwalled carbon nanotube (5% w/w) nanocomposite showed a homogenous distribution of sulfonyl-functionalized multiwalled carbon nanotube in the polyvinylpyrrolidone matrix.