Controlled release of prednisolone acetate from molecularly imprinted hydrogel contact lenses

The aim of this work was to study the influence of methacrylic acid (MAA) as a comonomer and the application of a molecular imprinting technique on the loading and release properties of weakly crosslinked 2‐hydroxyethyl methacrylate (HEMA) hydrogels, with a view toward their use as reloadable soft contact lenses for the administration of prednisolone acetate (PA). The hydrogels were prepared with HEMA (95.90–98.30 mol %) as a backbone monomer, ethylene glycol dimethacrylate (140 mM) as a crosslinker, and MAA (0, 50, 100, or 200 mM) as a functional monomer. Different PA/MAA molar ratios (0, 1 : 8, 1 : 6, and 1 : 4) in the feed composition of the hydrogels were also applied to study the influence of the molecular imprinting technique on their binding properties. The hydrogels (0.4 mm thick) were synthesized by thermal polymerization at 60°C for 24 h in a polypropylene mold. The hydrogels were then characterized by the determination of their swelling and binding properties in water. Their loading and release properties were also studied in 0.9% NaCl and artificial lachrymal fluid. Increasing the MAA content of the hydrogel and applying the molecular imprinting technique led to an increase in the loading capacity of the hydrogel. The optimized imprinted hydrogel showed the highest affinity for PA and the greatest ability to control the release process, sustaining it for 48 h. The results obtained clearly indicate that the incorporation of MAA as a comonomer increased the PA loading capacity of hydrogel. Our data showed that the molecular imprinting technique also had a significant effect on the loading and release properties of the hydrogels. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Mutagenicity of azo dyes used in foods, drugs and cosmetics before and after reduction by Clostridium species from the human intestinal tract

Various azo dyes currently approved by the US FDA for use in foods, drugs and cosmetics are reduced by anaerobic bacteria from the human intestinal tract. These bacteria with azoreductase activities include several Clostridium species. Seven of these azo dyes and their reduction products following incubation with a Clostridium sp. were evaluated for mutagenicity in Salmonella typhimurium strains TA98 and TA100. No mutagenicity was induced in either TA98 or TA100 by any of the seven azo dyes or the reduced metabolites when tested at concentrations as high as 200 microg/plate, with or without exogenous metabolic activation by rat liver fraction S-9.     

Influence of drying and extraction methods on yield and chemical composition of the essential oil of Satureja hortensis

The aerial parts of Satureja hortensis, cultivated in Iran (Research Station of Alborz, Karaj), were collected at the full-flowering stage and dried by three different drying methods (sun-drying, shade-drying and oven-drying at 45 °C). The essential oils of every treatment were obtained by hydro-distillation of the aerial parts. In addition, the essential oil of shade-dried sample was obtained by two other distillation methods (water- and steam-distillation and direct steam-distillation). The oils were analyzed by capillary GC and GC–MS. Statistical analysis showed no significant difference between oil yield (w/w) of the oven-dried sample (1.06%) compared to shade-dried (0.94%) and sun-dried (0.87%). The oil content of the shade-dried sample, obtained by hydro-distillation, was higher (0.94%) than that of the steam-distilled (0.27%). Twenty-three components were identified in the oil of S. hortensis in the different drying methods, including carvacrol (46.0–48.1%) and γ-terpinene (37.7–39.4%) as main components. Seventeen compounds were characterized in the oils of different distillation methods, including carvacrol (12.3–46%) and γ-terpinene (37.7–70.4%). Although the drying methods had no significant effect on oil composition of S. hortensis, the distillation changed the percentage of main components sharply (significant at 1%). The steam-distillation method produced the lowest amount of carvacrol and highest amount of γ-terpinene. The results showed that extraction by hydro-distillation gave the best results for S. hortensis, based on oil yield and carvacrol percentage.     

Synthesis and characterization of paclitaxel-imprinted nanoparticles for recognition and controlled release of an anticancer drug

Imprinted nanoparticles as drug delivery carriers have been considered because owing to their cross-linked network, they act as the drug reservoir for controlled release. In this study, selective MIPs nanoparticles of paclitaxel (PTX) were successfully developed for application in the biological molecular recognition and in the design of new anticancer drug delivery systems. The MIPs nanoparticles prepared by miniemulsion polymerization technique using methacrylic acid (MAA) and methyl methacrylate as non-covalent functional monomer, ethylene glycol dimethacrylate and trimethylolpropane trimethacrylate (TRIM) as cross-linker agent, azobisisobutyronitrile as initiator, and hexadecane as hydrophobic agent. In order to prepare of MIP nanoparticles, the synthesis conditions and effective parameters, such as: cross-linker agent, different molar ratios of template–functional monomer–cross-linker agent, were investigated. In addition, the effect of different molar ratios of template and monomers on polymers binding and morphology were characterized. Structure and thermal properties of MIPs were confirmed by FT-IR spectroscopy and thermogravimetric analysis. Imprinted nanoparticles showed significant drug loading and encapsulation efficiency, 17.8 and 100 %, respectively. The particle size of MIP nanoparticles varies between 187 and 726 nm, according the SEM images and laser light scattering data. The imprinted nanoparticles showed satisfactory affinity (84 %) to PTX with a binding of 12 times higher than non-imprinted nanoparticles in biological samples when MAA and TRIM were used as functional and cross-linker monomer, respectively. Results from release experiments of MIPs showed a very slow and controlled release of PTX which would be helpful for sustained drug delivery.     

Thermal sensor allocation for 3DICs using three dimensional thermal sensors

Stacking active layers leads to increased power density and overall higher temperatures in a three dimensional integrated circuit (3DIC). Thermal sensors are therefore crucial for run-time thermal management of 3DICs. A thermal sensor allocation method customized for 3DICs that utilizes ring oscillator based 3D sensors is introduced in this paper. A new 3D thermal map modeling method that facilitates efficient and very fast analyses is embodied in this thermal sensor distribution algorithm. Our results indicate that for a 4-layer stacked 3DIC, consisting of two layers of quad-core processors and one layer of L2 cache and one layer of main memory, less than 3.58% in maximum sensor reading error can be accomplished with a 53× speedup in the thermal evaluation time and thermal sensor distribution algorithm implementation.     

Alumina coated with oxazolone derivative for extraction of trace amounts of cadmium and copper from water and plant samples

A solid phase extraction procedure is proposed for simultaneous separation and preconcentration trace amounts of Cu(II) and Cd(II) using alumina coated with N'-{4-[4-{1-[4-(dimethylamino)phenyl]methylidene}-5-(4-H)oxazolone]phenyle}acetamide and determination by flame atomic absorption spectrometry. Using 0.1g of the sorbent, the metal ions were sorbed at pH 7 and recovered with 5.0 mL of 0.5 mol L(-1) HNO(3). It was found that extraction can be performed from the sample volumes of 2000 and 800 mL for Cu and Cd, respectively (preconcentration factors of 400 for Cu and 160 for Cd). Obtained sorption capacities for 1g sorbent were 8 mg Cu and 14 mg Cd. The linearity was maintained in the concentration range of 0.1 ng mL(-1) to 7.0 μg mL(-1) for Cu and 0.13 ng mL(-1) to 2.0 μg mL(-1) for Cd in the original solution. Eight replicate determinations of a mixture containing 1.0 μg mL(-1) each of the elements in the final solution gave relative standard deviation ±1.6 and ±1.3% for Cu and Cd, respectively. The detection limit was calculated as 0.06 and 0.05 ng mL(-1) for Cu and Cd, respectively. The proposed method was successfully applied to the determination trace amounts of Cu and Cd in the water and plant samples.     

Neodymium(III)-PVC membrane sensor based on a new four dentate ionophore

A new selective Nd(III) sensor has been made by using N,N′-bis(quinoline-2-carboxamido)-4,5-dimethylbenzene (H₂L₄) as a suitable ionophore. The sensor exhibits Nernstian response to Nd(III) ions in the concentration range of 5.0 × 10^− 6 to 1.0 × 10^− 2 M. It displays a Nernstian slope of 19.5 ± 0.4 mV/decade in the pH range of 2.9-9.2. The proposed sensor also exhibits a fast response time of < l0 s. The detection limit of the proposed sensor is 4.8 × 10^− 6 M, and it can be used over a period of 10 weeks without significant changes in its response. Furthermore, the electrode showed high selectivity toward Nd(III) ion respect to all other lanthanide ions tested. The practical utility of the sensor was demonstrated by using it as an indicator electrode in the potentiometric determination of Nd(III) ions in certified reference material and spiked water samples.     

Dipyridamole recognition and controlled release by uniformly sized molecularly imprinted nanospheres

We used novel synthetic conditions of precipitation polymerization to obtain uniformly sized molecularly imprinted nanospheres of dipyridamole for application in the design of new drug delivery systems. In addition, the morphology, drug release, and binding properties of molecularly imprinted polymers (MIPs) were studied, and the effects of morphology on other properties were investigated. The MIPs prepared by acetonitrile/chloroform (19:1, v/v) were uniformly sized nanospheres with an average mean diameter of approximately 88 nm at a wetted state, 50 nm at a dry state, and a polydispersity index of 0.062. The imprinted nanospheres showed excellent binding properties and had 62.7% of template binding compared with 17.1% of its blank polymer. The imprinted nanospheres with 67.5 (mg template/of polymer) of binding capacity had better imprinting efficiency than the 50.5% of binding capacity shown by irregularly shaped MIP particles that were prepared by chloroform. The molecular binding abilities of imprinted nanospheres in human serum were evaluated by HPLC analysis (binding about 77% of dipyridamole). Results from release experiments of MIPs showed a very slow, controlled, and satisfactory release of dipyridamole. The loaded drug was released up to 99% in 17 days for nanospheres and 22 days for irregularly shaped particles.     

Separation and preconcentration of cadmium ions using octadecyl silica membrane disks modified by methyltrioctylammonium chloride

A simple and selective method for the determination of cadmium in water samples by FAAS after solid phase extraction has been developed. The method is based on the sorption of cadmium as CdI(4)(2-) on octadecyl silica membrane disks modified by cationic surfactant of methyltrioctylammonium chloride in the pH range of 1-8. The sorbed cadmium is then eluted with 10ml of 1moll(-1) nitric acid in ethanol and is measured by flame atomic absorption spectrometry. The influence of flow rates of eluent and sample solution, iodide concentration and amount of surfactant in retention and elution of cadmium from disks was also investigated. A preconcentration factor of 100 was achieved by passing 1000ml of sample through the membrane disk. The limit of detection (LOD) of cadmium was found to be 0.014ngml(-1). Precision at 2.5mugl(-1) was 1.2% (n=8). The method was successfully applied to the determination of cadmium in some natural water samples. The accuracy was assessed through recovery experiment, independent analysis by graphite furnace atomic absorption spectrometry, and analysis of certified reference waters.