接触传热表面粗糙度曲线的统计特征

测量了一般机械加工表面的轮廓曲线，基于小波变换提取了粗糙度曲线，分析了轮廓高度和接触峰高度的统计分布特征。研究结果表明，轮廓高度不服从严格的正态分布，但具有一定的正态性，而接触峰高度的统计特征与其评定标准有直接的关系。因此，对于接触热阻的计算模型来说，接触点数的计算应以合理选取接触峰的评定标准为前提。     

小开河引黄灌区干渠衬砌工程存在的问题及对策

针对小开河引黄灌区干渠衬砌工程在管理运行中存在的渠坡衬砌板沿伸缩缝隆起、混凝土板表层脱落、底部混凝土板下滑、地下渠段混凝土板大面积坍塌破坏等问题。提出了衬砌板破坏的预防及对策,对以后的灌区节水改造工程建设有一定的参考和借鉴作用。     

Influence of inulin modification and flour type on the sensory quality of prebiotic wafer crackers

An inulin syrup made from Jerusalem artichoke tubers, either in its commercial form or after ultrafiltration, was freeze-dried and used as a prebiotic ingredient in the small-scale manufacture of wafer crackers. The flours used for the preparation of wafer batters were from wheat, rye or spelt wheat, or 1:1 combinations of wheat flour and rye flour or wheat flour and spelt wheat flour. Batter viscosity was strongly influenced by the selection of the flour type, but remained within technologically acceptable limits. The ultrafiltration of the inulin syrup, using a 1 kDa membrane, resulted in a significant reduction of the content of free sugars and minerals which, in turn, had a significant impact on the CIE-Lab color values of the wafer crackers. Using spelt wheat flour instead of wheat flour significantly increased wafer cracker firmness measured by penetration, as did the incorporation of ultrafiltered freeze-dried instead of native freeze-dried Jerusalem artichoke syrup. Sensory analysis revealed a significant influence of product formulation on appearance, flavor and texture of the wafer crackers. It can be concluded from quality scores, which were calculated by using weighting factors assigned to the sensory attributes, that wheat flour may be partially replaced by rye flour or spelt wheat flour without negatively affecting the sensory properties of the wafer crackers.     

Phytochemical and biological investigation of <Emphasis Type="Italic">Stevia rebaudiana</Emphasis> Bertoni; 1-labdane-type diterpene

Five labdane diterpenoids, austroinulin, iso-austroinulin, sterebin E, sterebin E acetate, and sterebin A acetate, along with hydrocarbons, aliphatic alcohols, β-amyrin, β-sitosterol and stigmasterol were isolated from the chloroform soluble fraction of the methanol extract of Stevia rebaudiana leaves. Chlorogenic and caffeic acids were isolated from the EtOAc fraction. All the isolated compounds were identified using spectral tools. The chloroform and methanol extracts proved significant anti-inflammatory effect and caused marked inhibition of carrageenan-induced paw oedema in rats.     

氮气氛下LTCC基板Cu共烧金属化研究

从PMMA型LTCC素坯膜的制备和PMMA的排胶机理两方面，研究了LTCC基板Cu共烧金属化。结果表明，采用PMMA作为粘结剂的流延浆料具有剪切变稀行为，所得的流延坯膜微观组织均匀，叠压后坯体内部无分层现象。热失重、差热和傅立叶红外光谱联用分析结果表明高纯N2气氛中PMMA以解聚机理热解，热解后释放的主要产物为丙烯酸甲酯。在高纯N2气氛中LTCC与Cu共烧后Cu金属化膜平整、致密，连通良好。经测试，基板表面Cu导体方阻小于5mΩ/□。     

Iu-Flex技术及应用

详细介绍了Iu-Flex的基本原理,包括核心网络(CN)节点标识、路由机制等,给出了移动通信网中利用Iu-Flex技术实现CN节点间负载均衡、负载重分配的方法和步骤。     

项目成功的几个关键原则

从项目和项目管理的定义和概念出发，提出了一个运作成功的项目应该遵循以下几个关键的管理原则。     

高合金铁基烧结材料在轧钢导位中的应用研究

本文研究了高合金铁基烧结材料在轧钢导位中的应用。实验表明,通过粉末冶金液相烧结技术,可以获得具有优良综合性能的制品,材料密度ρ≥7.5 g/cm3,硬度≥55 HRC,抗弯强度≥1 000 MPa,冲击韧度αk≥3.9 J/cm2,满足了轧钢导位辊的工作要求。材料利用率可达95%以上、降低了制备成本。使用寿命是普通轧辊寿命的3~6倍,适用于线材和小型型材的轧钢生产。