低电阻率气层测井评价方法

粘土矿物成份是造成气层电阻率低的主要原因。用灰色静态模型计算孔隙度，用BP神经网络计算束缚水饱和度等参数。与岩心分析结果比较，储层参数计算结果精度有所提高。用储层参数建立气层和水层的判别式，判别结果与试油有较好的一致性。综合数字处理结果建立了气层产能评价模型，处理结果与试油结果比较，符合率82％。     

变速铣削的试验研究

通过试验考证了变速铣削的减振效果和机床电机电流的波动幅度，试验结果表明，变速铣削同样具有明显的减振效果。机床电机电流虽有波动，但波动幅度不大，不会影响电机的正常使用，变速铣削具有良好的应用前景。     

定电流对LED的重要性

高功率超高亮度LED已经开始大量应用.要实际体现LED(尤其是高功率超高亮度LED)的优点,采用定电流驱动方式必要条件之一.     

Theoretical study of a potential low-noise semimetal-basedavalanche photodetector

The authors present a theoretical analysis of a possible avalanching photodetector (APD)-based on II-VI compound semiconductors. Each unit cell is composed of a HgTe layer, or a similar semimetal, sandwiched between two layers of CdTe and HgCdTe or similar semiconducting materials. The barrier layers are graded so that the leading barrier height is just high enough to eliminate the thermionic emission dark current out of the well. The use of a semimetal within the well has a distinct advantage over a semiconductor, which is that the ionization process is essentially an interband mechanism since the confined carriers within the well lie within the overlapping conduction and valence bands. As a result, the concentration of target carriers is virtually inexhaustible as in a conventional interband device     

保安矿柱回采地压监测数据分析

通过现场在马头门附近设立监测站进行长期监测井筒地压，分析了井筒附近地压活动规律，并与数值模拟分析值进行对比验证，从而为安全、高效地提前回收保安矿柱提供有力的保障。     

Self Assembly of Polymer Structures Induced by Electric Field

A method has been developed for fabricating polymer microstructures based on electric field induced self assembly and pattern formation. A dielectric fluid placed in between two conductive plates experience a force in an applied electric field gradient across the plates, which can induce a diffusive surface instability and self construction of the fluid surface. This process is exploited for the fabrication of self assembled polymer microstructures as well as replicated patterns through the use of pre-patterned plates or electrodes. FEM simulation is used to decide the minimum wavelength and electric gradient distribution of polymer structures. A variety of structures in the micron and nanometer scales including bio-fluidic MEMS, polymer optoelectronic devices can be fabricated using this method.     

钢的连铸用保护渣的表征

在钢的连铸过程中,结晶器保护渣的性质强烈地影响着铸造的行为、钢的质量、以及连铸工艺的环境.本研究采用高温显微技术来研究保护渣的熔化行为,采用液滴测试方法来测定保护渣的熔化速率.结果表明:自由碳是控制保护渣熔化行为的主要因素.熔化速率随碳的反应能力的增加而增加,随着碳含量的减少而增加.     

Feature-based classifiers for design optimization

We present a design optimization method for systems with high-dimensional parameter spaces using inductive decision trees. The essential idea is to map designs into a relatively low-dimensional feature space, and to derive a classifier to search for high-performing design alternatives within this space. Unlike learning classifier systems that were pioneered by Holland and Goldberg, classifiers defined by inductive decision trees were not originally developed for design optimization. In this paper, we explore modifications to such classifiers to make them more effective in the optimization problem. We expand the notions of feature space, generalize the tree construction heuristic beyond the original information-theoretic definitions, increase the reliance on domain expertise, and facilitate the transfer of design knowledge between related systems. There is a relatively small but rapidly growing body of work in the use of inductive trees for engineering design; the method presented herein is complementary to this research effort.     

Organizational determinants of IT adoption in the pharmaceutical distribution sector

The aim of this paper is to propose new organizational factors that might explain the differences in the extent and the speed of IT adoption. With this in mind, we carried out an analysis of 16 cases in the pharmaceutical distribution sector in Spain. The results indicate that there are certain intangible assets that favour the introduction and development of IT. Among these are a frank and fluid communication between departments and members of the organization, low levels of conflict, the explicit support of top management towards IT adoption and learning and creative skills of IT-staff. In addition to these factors, we found others that we propose as catalysts of IT adoption. Among these we might mention the special relationship between the member-clients and the company in the case of cooperative firms.