Exploring the potential of recovering 1‐butanol from aqueous solutions by liquid demixing upon addition of carbohydrates or salts

BACKGROUND: Fermentative production of 1‐butanol yields dilute aqueous solutions. Recovery of the butanol from these solutions is most commonly performed by energy‐intensive distillation. This work investigated the liquid‐liquid (L‐L) phase behavior of mixtures of butanol and water to explore the potential of using L‐L phase separation as a recovery possibility for 1‐butanol. The phase behavior is preferably influenced by compounds already present in the fermentation, such as carbohydrates and salts. RESULTS: The L‐L phase equilibria of butanol and water were determined in the presence of glucose, fructose, sucrose, NaCl, LiCl and CaCl₂. The aqueous and organic phase split is more pronounced in the presence of salts than in the presence of carbohydrates. Demixing is achieved with about 0.3 kg salt kg^?1 aqueous phase containing 40 g of butanol. CONCLUSION: Operation of L‐L based recovery using salts or carbohydrates requires extreme concentrations of those compounds. For feed material containing 40 g kg^?1 butanol, the tested carbohydrates do not influence the phase equilibria sufficiently to allow butanol separation. Fermentative butanol concentrations up to 70 g kg^?1 are required to create an effective L‐L phase split. The remaining residual aqueous carbohydrate solution might be used as feed for a following fermentation. Copyright © 2011 Society of Chemical Industry     

Does a monochromator improve the precision in quantitative HRTEM?

This paper addresses the question as to what extent the incorporation of a monochromator in an electron microscope can enhance the performance of high resolution transmission electron microscopy (HRTEM). The monochromator will reduce the chromatic aberration, and hence the information limit, at the expense of beam current, leading to a decrease in signal intensity and a corresponding decrease in signal-to-noise ratio (SNR). Both aspects, information limit and SNR, have been included in a quantitative evaluation based on the statistical precision with which the position of an atom column can be estimated. It is shown that the effect of a monochromator on the attainable precision depends on the microscope and monochromator parameters, as well as on the characteristics of the object.     

Integral measurements with a plutonium inert matrix fuel rod in a heterogeneous light water reactor lattice

As part of PSI's validatory efforts for neutronics calculations pertaining to inert matrix fuel (IMF) deployment in light water reactors, first-of-their-kind integral measurements have been carried out at the PROTEUS facility employing a specially fabricated Pu-Er-Zr IMF rod in a heterogeneous (boiling water reactor) test lattice. Analogous experiments have also been conducted with MOX and “dummy” IMF rods, providing the basis for a systematic comparison of experimental and calculational results.     

Experimental evaluation of losses in magnetic components for powerconverters

A very versatile experimental method for measuring losses in magnetic components is presented. This is not subject to the bandwidth constraints associated with the direct wattmeter method. The proposed method features accurate measurement of conduction losses, separation of core and conduction losses, measurement at high frequencies, and scale modeling of magnetic components. The experimental measurements are compared with theoretical predictions of components as applicable to certain power electronic converters     

Optimum nonlinear turn-off snubbers: design and application

The optimization of the general turn-off snubber, consisting of a nonlinear saturable snubber capacitor with an energy recovery circuit, is done in terms of minimum total energy loss in the power electronic turn-off circuit. To analyze this nonlinear circuit without a computer simulation, a two-step piecewise-linear approximation of the capacitor's capacitance-voltage curve is presented. Results regarding the total energy loss in the circuit during the switch turn-off indicate that the nonlinear capacitor as a snubber element is superior to the normal linear capacitor even if the ceramic capacitor is used only up to its specified voltage value     

Evidence of perchlorate (ClO4-) reduction in plant tissues (poplar tree) using radio-labeled 36ClO4-

Phytoremediation of perchlorate (ClO4) by poplar trees Populus deltoidex nigrawas investigated using small cuttings growing in hydroponic Hoagland solution and plant tissue cultures, consisting of spherical photosynthetic cell aggregates (i.e. nodules) developing in Murashige and Skoog culture medium. Both plants and nodules were grown under a 16 h/8 h photoperiod cycle and under sterile conditions. Degradation experiments, performed by the incubation of pregrown plants and nodules in the presence of 36Cl radio-labeled ClO4- (25 mg L(-1)), showed a reduction of the initial ClO4- concentration in the solution of about 50% after 30 d of incubation. Analysis of the distribution of radioactivity in different plant fractions indicated that 27.4% of the total was translocated to the leaves, while 66.9% remained in the solution. Very little radioactivity (less than 3.0%) was detected in the other parts of the plants. 32.0% of the radioactivity recovered in the solution was shown to consist of 36Cl- and 68.0% of nontransformed 36ClO4-. The radioactivity recovered in the leaf extracts was distributed as chloride (36Cl-) (1.6% of the total), chlorite (36ClO2-) (2.4%), chlorate (36ClO3-) (4.8%), nontransformed 36ClO4- (21.6%), and an unidentified organic compound (1.4%). The radioactivity recovered in the solution containing submerged nodules consisted of 36Cl- (6.4% of the total), 36ClO3- (1.3%), and nontransformed 36ClO4- (51.5%). Radioactivity detected in the nodule extracts was distributed as 36Cl- (2.0% of the total), 36ClO2- (5.2%), 36ClO3- (6.4%), 36ClO4- (22.7%), and an unidentified organic compound (0.5%). These results provide evidence of perchlorate reduction inside poplar tree tissues. 36ClO4- is partially reduced to 36ClO3-, 36ClO2-, and 36Cl-.     

Analysis and implications of aircraft disinsectants

Aircraft disinsection is required by various countries. In-flight spraying with a 2% phenothrin aerosol exposes passengers and crew directly. Residual spaying uses a permethrin emulsions in the absence of passengers and crew and results in dermal and oral exposures. Exposed passengers and crew often complain of, skin rashes, respiratory problems, tingling and numbness in fingertips and lips and burning eyes. A number of formulations were analyzed for their constituents using GLC-Mass. spec. Volatile organic compounds (VOCs) were found in all aerosol preparations including, ethyl benzene and xylene isomers along with phenothrin. Residual sprays contained, cis-, and trans-, permethrins, palmidrol, and occasionally naphthalene. Headspace analysis found methylene chloride and hexene derivatives but not the active ingredients. The known synergistic effects between organophosphates and pyrethrins, based on carboxyesterases inhibition, can be expected in the presence of Tricresylphosphates (TCPs), constituents found in jet engine oils and in some hydraulic fluids. During oil seal failure, the presence of TCP in the ventilation air could explain the increased sensitivity of some crew members and passengers to disinsectants.