Solar/UV-induced photocatalytic degradation of three commercial textile dyes.

The photocatalytic degradation of three commercial textile dyes with different structure has been investigated using TiO(2) (Degussa P25) photocatalyst in aqueous solution under solar irradiation. Experiments were conducted to optimise various parameters viz. amount of catalyst, concentration of dye, pH and solar light intensity. Degradation of all the dyes were examined by using chemical oxygen demand (COD) method. The degradation efficiency of the three dyes is as follows: Reactive Yellow 17(RY17) > Reactive Red 2(RR2) > Reactive Blue 4 (RB4), respectively. The experimental results indicate that TiO(2) (Degussa P25) is the best catalyst in comparison with other commercial photocatalysts such as, TiO(2) (Merck), ZnO, ZrO(2), WO(3) and CdS. Though the UV irradiation can efficiently degrade the dyes, naturally abundant solar irradiation is also very effective in the mineralisation of dyes. The comparison between thin-film coating and aqueous slurry method reveals that slurry method is more efficient than coating but the problems of leaching and the requirement of separation can be avoided by using coating technique. These observations indicate that all the three dyes could be degraded completely at different time intervals. Hence, it may be a viable technique for the safe disposal of textile wastewater into the water streams.     

Analytical Calculation of Large-Scale Deflection of Pulse-Loaded Elliptic Plates

Large deflections of pulse-loaded elliptic and round plates made of hardenable elastoplastic materials are investigated analytically using an energy-based approach. Formulas that are convenient for engineering design have been derived.     

Measuring knowledge transfer between fields of science

In this paper we report on the results of an exploratory study of knowledge exchange between disciplines and subfields of science, based on bibliometric methods. The goal of this analysis is twofold. Firstly, we consider knowledge exchange between disciplines at a global level, by analysing cross-disciplinary citations in journal articles, based on the world publication output in 1999. Among others a central position of the Basic Life Sciences within the Life Sciences and of Physics within the Exact Sciences is shown. Limitations of analyses of interdisciplinary impact at the journal level are discussed. A second topic is a discussion of measures which may be used to quantify the rate of knowledge transfer between fields and the importance of work in a given field or for other disciplines. Two measures are applied, which appear to be proper indicators of impact of research on other fields. These indicators of interdisciplinary impact may be applied at other institutional levels as well. This revised version was published online in August 2006 with corrections to the Cover Date.     

Makespan estimation and order acceptance in batch process industries when processing times are uncertain

Batch process industries are characterized by complex precedence relationships between operations, which renders the estimation of an acceptable workload very difficult. A detailed schedule based model can be used for this purpose, but for large problems this may require a prohibitive large amount of computation time. We propose a regression based model to estimate the makespan of a set of jobs. We extend earlier work based on deterministic processing times by considering Erlang-distributed processing times in our model. This regression-based model is used to support customer order acceptance. Three order acceptance policies are compared by means of simulation experiments: a scheduling policy, a workload policy and a regression policy. The results indicate that the performance of the regression policy can compete with the performance of the scheduling policy in situations with high variety in the job mix and high uncertainty in the processing times. Correspondence to: C.V. Ivanescu     

Mesh data structure selection for mesh generation and FEA applications

The data structure representing a mesh and the operators to create and query such a database play a crucial role in the performance of mesh generation and FE analysis applications. The design of such a database must balance the conflicting requirements of compactness and computational efficiency. In this article, 10 different mesh representations are reviewed for linear tetrahedral and hexahedral meshes. A methodology for calculating the storage and computational costs of mesh representations is presented and the 10 data structures are analysed. Also, a system for ranking different data structures based on their computational and storage costs is devised and the various mesh representations are ranked according to this measure. Copyright © 2002 John Wiley & Sons, Ltd.     

Tunneling spectroscopy of palladium-barium emitters

The surface of a palladium-barium cathode was studied using scanning probe microscopy techniques. Data from the tunneling spectroscopy showed the pattern of the electron work function distribution over a microscopic region on the emitter surface. This pattern is compared to the distribution of various phases in the palladium-barium alloy employed.     

Presentation and treatment of spontaneous aortocaval fistula

BACKGROUND: Spontaneous rupture of abdominal aortic aneurysm into the inferior vena cava is rare. The clinical presentation is highly variable, and the diagnosis can be difficult, often being made only at operation. The aortocaval fistula results in a large left-to-right shunt, which can cause cardiac failure. Once the diagnosis is made, treatment is by surgical closure of the fistula and repair of the aneurysm with a graft. METHODS: This is a retrospective review of a single surgeon's experience with aortocaval fistula complicating abdominal aortic aneurysms. RESULTS: Over a 15-year period, we had five patients with spontaneous aortocaval fistula who were treated operatively. Preoperative diagnosis was made in two, suspected in one, and not made in two, one of whom died (the only perioperative death in the series). CONCLUSIONS: Spontaneous aortocaval fistulas are uncommon, and their preoperative recognition is difficult. Hematuria in association with an abdominal aortic aneurysm should raise the suspicion of an aortocaval fistula. Surgical correction is possible, with survival rates comparable to those associated with rupture of aneurysms into the retroperitoneum. Early operative control of the fistula is important to optimize the preload to the heart.     

Disparity field and depth map coding for multiview 3D image generation

In the present paper techniques are examined for the coding of the depth map and disparity fields for stereo or multiview image communication applications. It is assumed that both the left and right channels of the multiview image sequence are coded using block- or object-based methods. A dynamic programming algorithm is used to estimate a disparity field between each stereo image pair. Depth is then estimated and occlusions are optionally detected, based on the estimated disparity fields. Spatial interpolation techniques are examined based on the disparity/depth information and the detection of occluded regions using either stereoscopic or trinocular camera configurations. It is seen that the presence of a third camera at the transmitter site improves the estimation of disparities, the detection of occlusions and the accuracy of the resulting spatial interpolation at the receiver. Various disparity field and depth map coding techniques are then proposed and evaluated, with emphasis given to the quality of the resulting intermediate images at the receiver site. Block-based and wireframe modeling techniques are examined for the coding of isolated depth or disparity map information. Further, 2D and 3D motion compensation techniques are evaluated for the coding of sequences of depth or disparity maps. The motion fields needed may be available as a byproduct of block-based or object-based coding of the intensity images. Experimental results are given for the evaluation of the performance of the proposed coding and spatial interpolation methods.     

Baseband Volterra filters for implementing carrier basednonlinearities

A diagonal coordinate representation for Volterra filters is developed and exploited to derive efficient Volterra filter implementations for processing carrier based input signals. In the diagonal coordinate representation, the output is expressed as a sum of linear filters applied to modified input signals. Hence, linear filtering methods are employed to implement the nonlinear filter on a baseband version of the input. Downsampling is then used to reduce computational complexity. The same approach is employed to develop efficient implementations for processing continuous-time carrier-based signals, pulse amplitude-modulated signals, and frequency division multiplexed input signals     

Itraconazole for treatment of oral candidosis in pediatric cancer patients

The objective of this study was to determine the frequency, degree of curvature, and the configuration of mesiobuccal and mesiolingual root canals of mandibular first molars. The degree of curvature and configuration of root canals creates some technical difficulties to the clinician during biomechanical preparation. Therefore this knowledge is essential for successful endodontic therapy. Six hundred and ninety-seven freshly extracted mandibular first molars were used in this study. After introducing 0.8 to 15 K reamers into the mesial root canals, the teeth were radiographed in buccolingual (clinical) and mesiodistal (proximal) directions. All samples showed curvatures at varying degrees in both views. There was a significant correlation between the degree of primary curvature of mesiobuccal and mesiolingual canals in clinical directions for total samples. When the primary curvature values of the mesial root canals were evaluated in Vertucci classification, the mesiobuccal and mesiolingual canals in Vertucci type VI were found as significantly correlated (r = 0.7173, p < 0.05). A significant correlation was seen between the secondary curvature values of clinical and proximal views of mesiolingual canal in Vertucci type VI (r = 0.9891, p < 0.05). The secondary curvature values in the clinical views of mesiobuccal and mesiolingual canals were found as significantly correlated in Vertucci type II.