单壁纳米碳管/纳米铝基复合材料的增强效果

用半连续氢电弧法和活性氢等离子蒸发法分别制备出单壁纳米碳管(SWNTs)和纳米A1粉体，然后用提纯后的SWNTs和纳米A1粉体制备出SWNTs含量(质量分数)分别为0、2．5％、5．0％、7．5％和10.0％的单壁纳米碳管／纳米铝基块体复合材料．SWNTs对高强度纳米A1基体具有显著的增强作用，当SWNTs含量小于5．0％时，材料的硬度随着SWNTs含量的提高线性上升．其中5％SWNTs和纳米A1的复合增强效果最好，其硬度可达2.89GPa，大约是粗晶A1(0．15GPa)的20倍．当SWNTs含量超过5．0％时，增强效果开始缓慢的下降．讨论了单壁纳米碳管增强纳米铝基复合材料的强化机制．     

静压下ZnS：Te中Te等电子陷阱的发光

研究了4块ZnS：Te薄膜样品(Te组分从0．5％到3．1％)的光致发光谱在常压下的温度特性．对于Te组分较小的2块样品观察到2个发光峰，分别来自Te1和Te2等电子陷阱；而对Te组分较大的2块样品则只观察到1个来自Te2等电子陷阱的发光．我们还研究了这些发光峰在低温1．5K下的流体静压压力行为．观察到与Te1有关的发光峰压力系数比ZnS带边的要大很多，而与Te2有关的发光峰压力系数则比带边小．根据Koster-Slater模型，价带态密度半宽随压力的增加是Te1中心有较大压力系数的主要原因，而Te1和Te2中心的不同压力行为则是由于压力对两者缺陷势增强的不同效果引起的．     

转炉合金最小成本控制模型

介绍了基于合金最小成本的转炉炼钢钢水成分调整模型工应用于宝钢炼钢在线生产控制的情况。模型给出了在满足目标成分等工艺要求下，成本最小的合金投入组合及合金投入量；计算了合金加入钢包后引起钢水温度、重量等的变化，为降低生产成本（合金投入），提高出钢成分控制精度提供了有效的途径。     

国产ME型活性染料配伍性的探讨

测定ME型活性染料不同浓度单色及拼混的比移值，对其在轧染中出现的色光波动进行分析，有利于染色质量的提高。     

Platinum concentrations in urban road dust and soil, and in blood and urine in the United Kingdom

Increasing Pt concentrations from vehicle catalysts have been reported from a number of countries. Analysis of Pt and Pd in soils and road dusts taken from areas of high and low traffic flows in SE England show concentrations of Pt in the range < 0.30-40.1 ng g-1 and Pd in the range < 2.1-57.9 ng g-1. Higher concentrations of Pt are associated with high traffic densities. Samples taken from streets of lower traffic flows were found to contain the lower concentrations of the ranges. Pilot studies of Pt concentrations in blood and urine using ICP-MS have been carried out. Platinum concentrations in whole blood were: precious metal workers, 780-2170, mean 1263 pmol l-1 (0.152-0.423, mean 0.246 microgram l-1); motorway maintenance workers, 645-810, mean 744 pmol l-1 (0.126-0.158, mean 0.145 microgram l-1); Imperial College staff, 590-713, mean 660 pmol l-1 (0.115-0.139, mean 0.129 microgram l-1). Platinum concentrations in urine in pmol Pt per mmol creatinine were: precious metal workers, 122-682, mean 273 [0.21-1.18, mean 0.47 microgram Pt (g creatinine)-1]; motorway maintenance workers, 13-78, mean 33.7 [0.022-0.135, mean 0.058 microgram Pt (g creatinine)-1]; Imperial College staff, 28-130, mean 65.6 [0.048-0.224, mean 0.113 microgram Pt (g creatinine)-1]. Detection limits were 0.03 microgram l-1 for both blood and urine. The possible health effects of increasing Pt in the environment are discussed. Platinum provides an excellent example of the significance of speciation in metal toxicity. Platinum allergy is confined to a small group of charged compounds that contain reactive ligand systems, the most effective of which are chloride ligand systems. Metallic Pt is considered to be biologically inert and non allergenic and since the emitted Pt is probably in the metallic or oxide form, the sensitising potential is probably very low. Platinum from road dusts, however, can be solubilised, and enter waters, sediments, soils and the food chain. There is at present no evidence for any adverse health effects from Pt in the general environment, particularly allergic reactions.     

An efficient hierarchicaltraversal algorithm for ray tracing

Ray tracing has been shown to be an excellent technique for rendering realistic images. However, it is important to reduce the lengthy computation time resulting from the brute-force nature of the original ray-tracing algorithms. In this paper, two ideas are proposed to speep up the well-known hierarchical subdivision method. First, a new hierarchy traversal scheme is described to reduce the number of raybounding volume intersection tests for secondary rays. Then, a plane-sweep method is proposed to make fewer intersection checks for eye rays. Experiments and discussions are presented to prove the feasibility of our methods.     

济钢中板厂加快技术创新的对策

本文通过对中板厂近年来技术改造后工艺装置和技术水平的分析，并结合中国加入WTO后对中国钢铁企业面临全球化市场竞争严峻性的认识，提出了中板厂在实现高产生产模式后，应加快技术创新的步伐，尽快完成由高产向优质、多品种、低消耗的高效化生产模式转化的主导思想、措施及建议。     

Continuous Separation of Inclusions from Aluminum Melt Flowing in a Circular Pipe using a High Frequency Magnetic Field

The continuous separation of inclusions from aluminum melt flowing in a circular pipe using a high frequency magneticfield was investigated both theoretically and experimentally The separation efficiency was calculated based on thetrajectory method and compared with experimental results. It is found that the separation efficiency is a functilnondimensional parameters t_i·d_p~2B_e~2/μ_fμ_eα~2 and α/δ.The effective way to improve the separation efficiency is to increasethe effective magnetic flux density and decrease the pipe radius. and the value of α/δ should be kept about 2 in orderto obtain the optimum separation efficiency.     

节理岩体的代表单元集合体模型及弹性参数预测

本文明确提出了节理岩体“代表单元集合体”的概念和模型，通过对节理岩体的“代表单元集合体”进行数值模拟，研究了节理岩体的“代表单元集合体”的变形特性，建立了节理岩体的弹性模型，提出了预测节理岩体宏观等效弹性参数的计算机模拟方法，并将其应用于岩体工程稳定性分析中。