Flakes of natural carbyne in a diamond mine

Flakes of natural carbyne were found in Liao-Ning diamond mine, China, and examined by HRTEM, XRD and EDX. Lattice fringes and clear SAD patterns were obtained. The interlayer spacings obtained with SAD were in good agreement with those determined on the powders found in Ries crater meteorite by X-ray diffraction. However, they are different in color and shape, the one found in China being black and flaky, but the one in Ries crater meteorite being silver-white and particulate. It was assumed that carbyne might be stabilized by the intercalation of either Si or Fe in nature.     

某直升机主减撑杆疲劳试验断裂分析

某直升机主减撑杆在进行疲劳试验时,未达到疲劳周次发生断裂,通过对断裂主减撑杆进行断口检查、金相组织观察以及构件之间配合状况分析,找出主减撑杆提早断裂的原因是微动磨损疲劳断裂.     

Decomposed-distance weighted optimal transport for unsupervised domain adaptation

Applied Intelligence - Unsupervised Domain Adaptation (UDA) aims to transfer knowledge from a label-rich source domain to an unlabeled target domain with a different but related distribution....     

基于数字兆欧表自动切换档位的研究与实现

随着电力、电气设备的日益复杂化,对于其安全性能也有了更高的要求,数字兆欧表作为测量绝缘阻值的重要工具,已在工业领域中广泛应用;为了满足测量精度以及兆欧表的可靠性,通过基于S3C2440的嵌入式平台,提出了一种基于数字兆欧表的自动切换档位的实现方案,以达到更加精确的测量;此方案通过判断采集到的电压值选择相应的采样电阻来实现,并结合硬件平台和软件设计,分别介绍了驱动程序和应用程序的编写与测试,并很好地应用到了实际电路中;经测试,能够达到预期的效果,测量精度高,测量误差控制在±2%。     

整车道路模拟试验控制技术

结合CIMC整车试验室建设,重点介绍整车道路模拟试验系统控制系统构成、控制技术、工作原理及应用。     

基于用户查询的多关系群体挖掘改进算法

多关系群体挖掘是近年来快速发展的重要的数据挖掘领域之一.传统的群体挖掘方法是假定网络中只有一种关系,并且挖掘结果与用户需求无关.但现实中的社会网络中存在着多种关系.基于用户查询,不同的关系表现出不同的重要性.分析了多关系群体挖掘中关系提取的问题,提出一种新算法对满足用户期望的关系进行最优线性合并.利用获得的合并关系提高群体挖掘的精准性.     

直埋玻璃钢聚氨酯保温管及其保温层厚度设计

介绍了直埋玻璃钢聚氨酯保温管的结构形式及优良性能．为了降低玻璃钢聚氨酯保温管的初期投资,探讨了直埋玻璃钢聚氨酯热力管保温层的2种设计方法,并采用工程实例进行计算．结果表明,按双层保温计算法设计保温层更为经济合理．以上结论为直埋玻璃铜聚氨酯保温管保温层设计提供了理论依据．     

Application of BP Neural Network in Prediction of Cu-Pb Composite Plates Properties

Abstract： The artificial neural networks（ANN） , which have broad application, are proposed to develop Cu-Pb composite plates materials. Based on the back propagation（BP） algorithm of the forward muhilayer perceptron, the model to predict the shear stress under different ingredient of the third element and the hot dipping temperature for Cu-Pb composite plates are established. Then the relational model among the third element, hot dipping temperature and shear stress by using the limited data are studied, and the forecast average error is 4%. This model can satisfy the requirements of the precision of forecast in the project experiment process. The results show that the corresponding shear stress is greater when the third element in the element contains more Sn; the most appropriate temperature of hot-dip plating about is 340℃, ＇after predicted with lead/the third element/the best performance of copper composite material element of the third group is the one-element Sn, hot dip plating temperature is 335 ℃ ; two-element is 90% Sn 10% Bi, and hot dip plating temperature is 345 ℃. The prediction results can be used for a reference in instructing the further experimental design.