一种高速浮点加法器的设计实现

浮点加法器是协处理器的核心运算部件，是实现浮点指令各种运算的基础，其设计优化是提高浮点运算速度和精度的关键途径。文章从浮点加法器算法和电路实现的角度给出设计方法，并且提出动态与静态结合设计进位链的方案以及前导O预测面积与速度的折衷方法。动态与静态结合设计进位链的方法有效地降低了功耗，提高了速度，改善了性能。目前已经嵌入协处理器的设计中，并且流片测试成功。     

变权组合预测模型在大坝安全监测中的应用

简要介绍了组合预测模型的基本原理，该模型改进了单一模型考虑因素的片面性，但常规的组合预测模型的权系数是固定的。考虑到各种模型的预测精度的变化，以及大坝安全监测数据存在的突变、时效等因素，固定权系数的组合预测模型有待进一步改进。文中提出了变权系数组合预测模型，并将其用于实际的大坝安全监测工程。结果表明，变权组合预测模型的预报精度高于其他模型。是一种值得推广的方法。     

从120号溶剂油中提取正庚烷并回收甲基环己烷的研究

总结了国内外正庚烷的生产状况和市场行情，分析了中小型石化企业生产正庚烷的可行件，提出采用萃取精馏分离正庚烷的方法．在间歇精馏塔塔顶温度为91-101℃、塔釜为103-110℃的条件下，可以得到58％以上正庚烷和甲基环己烷的混合液．根据物质相关性质，初步确定有关萃取溶剂，利用单级循环汽液平衡釜对初选的萃取剂进行实验研究，选定乙二醇作为萃取剂，为进一步实验研究提供依据．     

车辆换档品质控制阀动态特性研究

建立了某车辆换档品质控制阀的仿真模型，分析了反馈油孔直径、背压及弹簧刚度等因素对动态性能的影响。台架试验验证了所建模型的正确性及有效性。研究结果可为车辆换档品质控制系统的设计、改进及性能预测提供依据。     

用两亲聚合物制备大颗粒苯丙乳液

分别以两亲聚合物P(C9-AA)和P(DCPD-St-α-St-AA)作乳化荆，研究了制备大颗粒(约1μm)及具有一定稳定性的苯丙乳液的方法，讨论了乳化剂，温度及引发剂用量对乳液性能的影响。结果表明，以P(C9-AA)作乳化剂时，引发剂用量为单体质量的1．2％，90℃时可以合成性能良好的苯丙乳液；以P(DCPD-St-α-St-AA)作乳化荆时，引发剂用量为单体质量的1．2％，80℃时可以合成性能良好的苯丙乳液。     

Epoxidation of high trans‐1,4‐polyisoprene and its properties

A new organic‐solvent‐free water‐phase suspension method was used to synthesize partially epoxidized high trans‐1,4‐polyisoprene (TPI) to improve its properties, including oil resistance and wet‐skid resistance. The epoxidation was conducted in an aqueous peracetic acid solution and on the TPI granules prepared by a bulk precipitation method with supported titanium catalyst. The effects of the synthesis conditions, including reaction temperature, reaction time, and pH value, on the epoxy content were investigated. Epoxidized trans‐1,4‐polyisoprene (ETPI) with epoxy contents between 10 and 80% were obtained within 4 h. Both the amorphous and crystalline regions of TPI were epoxidized. The crystallization properties decreased with increasing epoxy content. ETPIs possessed lower mechanical properties than TPI but could be enhanced by vulcanization. The oil resistance and wet‐skid resistance were significantly improved after epoxidation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

钢轨试验方法的研究

结合即将颁布的新国家标准GB2585<铁路用热轧钢轨>和国家标准TB/T2344-2003<43 Kg/m-75 Kg/m热轧钢轨订货技术条件>,通过对武钢生产的U71Mn重轨进行拉伸性能、布氏硬度、脱碳层分布情况、非金属夹杂物以及显微组织等试验方法的研究,分析了U71Mn重轨在新旧标准要求下的质量水平,为改善U71Mn的质量、符合新标准提供了重要的检验理论依据.     

机械过冷的制冷系统在汽车空调中的应用

由于很多汽车空调采用斜盘式压缩机，有利于采用机械过冷的制冷系统，来增加汽车空调的制冷量、提高制冷效率。本文的主要目的是通过对系统工质的流量分配、空调制冷量和性能系数(COP)与中间压力之间的变化关系的研究，来研究机械过冷在汽车空调中应用的可行性。     

A Study of the Compatibility Between Asphalt and SBS

In this article, the compatibilities between different components of a base asphalt and styrene butadiene styrene (SBS) have been analyzed from microscopic structures. Specifically, the asphalt was separated into three components: saturates, aromatics, and resins, by Solvent Recycled Absorption Chromatography Separation Technology (SRACST). The compatibilities between these different components and the polymer were compared with the help of Fluorescence Microscope (FM) with which the existing state of the polymer SBS in these different components could be examined obviously. The modified effects indicated that aromatics could cause SBS swollen and, resins dissolved SBS better than saturates, though both the two components could partially dissolve SBS and the two mixtures presented two immiscible phase systems. In order to further investigate the compatibility between aromatics and SBS, from macroscopic properties, an additive rich in aromatics was added to the SBS/asphalt mixture, and the result was satisfactory.     

招远金矿集中区金矿富集规律及找矿标志

招远金矿集中区是我国最大的金矿集中区，区内金矿床在时间和空间上的分布规律十分明显。该区矿化类型主要有石英脉型、蚀变岩型及二者之间的过渡类型，其在空间上的分布规律为综合信息找矿及矿床定位预测提供地质信息，并可作为进一步的找矿标志。