Bio-ethanol production by fermentation of ricotta cheese whey as an effective alternative non-vegetable source

The aim of the present paper is to investigate the feasibility of bio-ethanol production by batch fermentation of ricotta cheese whey (“Scotta”), a dairy industry waste characterized by lactose concentration ranging from 4.5% to 5.0% (w/w) and, with respect to traditional (raw) whey, by much lower protein content. Scotta, therefore, could represent an effective non-vegetable source for renewable energy production. The microrganism used to carry out the fermentation processes was the yeast Kluyveromyces marxianus. Preliminary experiments, performed in aerobic conditions on different volumes of scotta, have shown the actual growth of the yeast. The subsequent fermentation experiments were carried out, in anaerobic conditions, on three different substrates: scotta, raw cheese whey and deproteinized whey. The experimental data have demonstrated the process feasibility: scotta is an excellent substrate for fermentation and exhibits better performance with respect to both raw cheese whey and deproteinized whey. Complete lactose consumption, indeed, was observed in the shortest time (13 h) and with the highest ethanol yield (97% of the theoretical value).     

Hyperazeotropic ethanol salted-out by extractive distillation. Theoretical evaluation and experimental check

A distillation process for the production of hyperazeotropic ethanol from a dilute wine obtained from the fermentation of biomass has been studied. This process utilizes the coupling of a soft preconcentration stage and of a dehydration stage based on the salting-out effect produced by calcium chloride on the ethanol in an aqueous solution, with the disappearance of the azeotrope. The salt is employed in a close cycle, due to the presence of a regeneration stage, therefore no consumption of calcium chloride is noticed.

The distillation process utilizes one column consisting of two sections operating at different pressures in order to reach an efficient heat recovery.

In this paper, a simplified flow-sheet of the process and the principal operating conditions of the distillation column are illustrated. When compared with other processes, conventional or under development, this one is characterized by the promising reduction of the specific energy requirement.

The operating conditions chosen for the distillation with salt have been experimentally checked using a laboratory column running continuously with calcium chloride as salting-out agent. Moreover, the experiments confirmed the reliability of the mathematical model of the process. Further experiments are in progress with the aim of utilizing a mixture of salts which can be fed from the bottom of the dehydration section back to the fermentor, so that the salt regeneration stage can be reduced.     

Internal and external algorithms for the points-in-regions problem—the inside join of geo-relational algebra

We consider the problem of collectively locating a set of points within a set of disjoint polygonal regions when neither for points nor for regions preprocessing is allowed. This problem arises in geometric database systems. More specifically it is equivalent to computing theinside join of geo-relational algebra, a conceptual model for geo-data management. We describe efficient algorithms for solving this problem based on plane-sweep and divide-and-conquer, requiringO(n(logn) +t) andO(n(log² n) +t) time, respectively, andO(n) space, wheren is the total number of points and edges, and (is the number of reported (point, region) pairs. Since the algorithms are meant to be practically useful we consider as well as the internal versions-running completely in main memory-versions that run internally but use much less than linear space and versions that run externally, that is, require only a constant amount of internal memory regardless of the amount of data to be processed. Comparing plane-sweep and divide-and-conquer, it turns out that divide-and-conquer can be expected to perform much better in the external case even though it has a higher internal asymptotic worst-case complexity. An interesting theoretical by-product is a new general technique for handling arbitrarily large sets of objects clustered on a singlex-coordinate within a planar divide-and-conquer algorithm and a proof that the resulting “unbalanced” dividing does not lead to a more than logarithmic height of the tree of recursive calls.     

Bicyclo‐orthoester as a low‐shrinkage additive in cationic UV curing

A commercially available bicyclo‐orthoester (BOE) was used as low‐shrinkage additive for cationic UV curing of epoxy resins. A high reactivity of BOE by ring‐opening homopolymerization has been observed under cationic UV curing conditions. The BOE and trimethylolpropane triglycidyl ether monomers are compatible and give rise to a cured copolymeric network, under UV irradiation, with a flexibilization increase by increasing the BOE content in the photocurable formulation. Shrinkage after photopolymerization shows a linear reduction by increasing the BOE content in the photocurable formulation; a volume expansion upon polymerization is reached in the presence of 50 wt% of the additive. Copyright © 2007 Society of Chemical Industry     

Production of mycotoxins byFusarium species isolated in Germany

Summary Cultures ofFusarium tricinctum 434 formed large amounts of the trichothecene mycotoxins deoxynivalenol (DON) and 3-acetyldeoxynivalenol (AcDON), as well as the macrocyclic secondary metabolite zearalenone on moistened, autoclaved maize, rice and oats. The formation of zearalenone was low, with levels from 15 to 72 mg/kg as compared to the trichothecene production with maximum quantities of 917 mg/kg of AcDON on rice and 750 mg/kg DON on oats. In the cultures ofF. graminearum 183, total mycotoxin amounts found were lower, with maximum levels of zearalenone up to 150 mg/kg and AcDON up to 160 mg/kg on rice. DON, however, was produced in quantities of about 740 mg/kg on rice.

---

Produktion von Mykotoxinen durch in Deutschland isolierte Fusarium-Arten1. Zeitverlauf der Deoxynivalenol-, 3-Acetyldeoxynivalenol-, und Zearalenon-Bildung auf festen Substraten

Zusammenfassung Kulturen vonFusarium tricinctum 434 bildeten auf feuchtem, autoklaviertem Mais, Reis bzw. Hafer relativ hohe Mengen der Trichothecen-Mykotoxine Deoxynivalenol (DON) und 3-Acetyldeoxynivalenol (AcDON) sowie das zu den makrocyclischen Lactonen zählende Mykotoxin Zearalenon. Die Zearalenonbildung war mit Werten von 15 bis 72 mg/kg gegenüber der Trichothecenproduktion mit maximal 917 mg/kg AcDON auf Reis und 750 mg/kg DON auf Hafer deutlich niedriger. In den Kulturen vonF. graminearum 183 wurden insgesamt geringere Toxinmengen gefunden mit maximalen Zearalenon-konzentrationen bis zu 150 mg/kg sowie AcDON Mengen bis zu 160 mg/kg auf Reis. Dagegen erreichte die DON-Bildung auf Reis 740 mg/kg.

     

Isolation of a hydroxytyrosol-rich extract from olive leaves (<Emphasis Type="Italic">Olea Europaea</Emphasis> L.) and evaluation of its antioxidant properties and bioactivity

In this research, a phenol extract of high hydroxytyrosol (OLPE) content was obtained from olive leaves (Olea europaea L.), and subsequently tested under different contexts. The method used to obtain the OLPE basically involved two steps: the use of strongly-acid aqueous steam, generated from 10% HCl (v/v) at 100°C, to directly hydrolyse the native complex phenols from integral olive leaves, and OLPE recovery by liquid–liquid extraction with ethyl acetate. Hydrolysis time was 1 h. Finally, the dried extract was dissolved in distilled water. The OLPE total phenols were determined by Folin–Ciocalteu’s method and by HPLC analysis. Hydroxytyrosol was about 92% of the total phenols present in OLPE, and the yield was about 0.2% on fresh leaves. OLPE showed antioxidant effects on different food lipids and did not inhibit lactic acid bacteria growth; however, it showed cytotoxicity on NIH/3T3 fibroblasts and human umbilical vein endothelial cells at concentrations higher than 0.32 mM (as hydroxytyrosol).     

Relationship with the mother modulates the response of yearling Japanese macaques (Macaca fuscata) to the birth of a sibling.

The authors investigated the changes induced by the birth of a sibling in the relationship of 1-year-old Japanese macaques (Macaca fuscata) with their mothers and group companions. After the birth of a sibling, mother-yearling contact, proximity, and grooming decreased dramatically. Yearlings responded to such a reduction in maternal care in either of 2 radically different ways. Yearlings either sought attention from group companions and showed no sign of depression or did not compensate for the mother's reduced availability and became depressed. The modality of response was predicted by the quality of the relationship with the mother before the sibling birth. Yearlings that had spent a larger amount of time in contact with their mothers were less likely to become depressed. Security of the attachment relationship with the mother may be the factor mediating the link between the time in contact and the yearling's response to the birth of a sibling. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Electrochromic Polymer‐Dispersed Liquid‐Crystal Film: A New Bifunctional Device

Polymer‐dispersed liquid crystals (PDLCs) are liquid‐crystal dispersions within a polymer matrix. These films can be changed from an opaque to a transparent state by applying a suitable alternating‐current electric field. PDLCs have attracted the interest of researchers for their applications as light shutters, smart windows, and active displays. For such applications, electrochromic devices, which change color as a result of electrochemical reactions, have also become a recent focus of research. Herein, we report our preliminary results on bifunctional devices based on PDLCs that host electrochromic guest molecules. Such devices allow both an independent and fast switching from a scattering opaque state to a transmissive transparent state owing to liquid‐crystal reorientation and a color change from white (pale yellow) to dark blue, due to either oxidation or reduction of the electrochromic molecules.     

Path‐following algorithms and experiments for an unmanned surface vehicle

This paper addresses the problem of path following in two‐dimensional space for underactuated unmanned surface vehicles (USVs), defining a set of guidance laws at the kinematic level. The proposed nonlinear Lyapunov‐based control law yields convergence of the path‐following error coordinates to zero. Furthermore, the introduction of a virtual controlled degree of freedom for the target to be followed on the path removes singularity behaviors present in other guidance algorithms proposed in the literature. Some heuristic approaches are then proposed to face the problem of speed of advance adaptation based on path curvature measurement and steering action prediction. Finally a set of experimental results of all the proposed guidance laws, carried out with the Charlie USV, demonstrates the feasibility of the proposed approach and the performance improvements, in terms of precision in following the reference path and transient reduction, obtained by introducing speed adaptation heuristics. © 2009 Wiley Periodicals, Inc.