Performance assessment of a solar still using blackened surface and thermocol insulation

Fluoride contaminated drinking water is a severe problem in many parts of the world because of fluoride-related health hazards, which are considered to be a major environmental problem today. The present work is aimed at utilizing solar energy for removal of fluoride from drinking water by using a “solar still”. Also tests have been conducted with the “solar still” to find out hourly output rate and “still efficiencies” with various test matrixes. It is observed that the distillate from “solar still” showed a fluoride reduction of 92–96%. Further, the efficiency of “solar still” got increased by 11% when capacity of water in the solar basin was raised from 10 to 20 L. Upon suitable modification of the solar basin with appropriate base liner and insulation, this efficiency of the “solar still” is found to be further increased by 6% with a 20 L basin capacity.     

Growth-dependent refractive index nonlinearity and mean microstructural properties of codeposited composite gadolinia silica films

Codeposited gadolinia silica composite films have been probed for their growth-dependent optical and microstructural properties using phase-modulated spectroscopic ellipsometry and scanning probe microscopy. The mean refractive indices were computed using an effective ellipsometric multilayer modeling approach. Most of the composite films have shown growth-induced nonlinear refractive indices to some extent. However, the mean optical properties have depicted interesting trends in the microstructural evolutions. Gadolinia silica composite films in the composition ratio ranging from 90:10 to 70:30 have depicted superior optical as well as morphological properties. Unlike conventional oxide films, these composite films displayed microstructural, spectral refractive index, and bandgap supremacy over the pure films. Such an observation cannot be explained by the empirical Moss law. Atomic force microscopy also revealed a superior morphology in the composite films. The autocorrelation and height-height correlation functional analysis have distinctly supported such superior microstructural features in the composite films, which justifies the supremacy of the optical properties. Such an observation has opened up possibilities to utilize such composite films toward deep-and extreme-ultraviolet spectral regions of the electromagnetic spectrum.     

Direct and electromagnetically coupled compact microstrip antenna design with modified fractal DGS

This article proposes ultra‐miniature microstrip patches with direct and electromagnetically coupled feeding mechanism for wireless communications at 10 GHz. Antenna size reduction is achieved here by loading a modified Minkowski fractal (type‐2) defected ground structure (MFDGS‐II) exactly beneath the radiating patch. The proposed method involves the selection of best DGS configuration through sensitivity analysis of the antenna structure. From different applications point of view, three different designs: a single layer direct fed patch and two electromagnetically coupled fed multi‐layered microstrip patch antennas are proposed here and designed with MFDGS‐II. The resonant frequencies of the antenna designs are reduced in a significant manner incorporating MFDGS‐II without any change in the physical size of the antenna. The prototypes of the proposed antennas are fabricated, and the performance parameters are measured. Compared with other existing structures, with a lower patch size of 0.20 λ₀ × 0.15 λ₀, the proposed single layered antenna with microstrip feed achieves a patch size reduction up to 67% and an overall volumetric reduction of 84%, respectively. Similarly, the proposed multi‐layered patch with proximity feed exhibits a maximum impedance bandwidth of 600 MHz and the aperture coupled fed patch has a realized gain of 6.2 dBi with radiation efficiency of 91% centered at 10 GHz. All three proposed compact antenna structures are best in three different aspects and have the potential to meet the practical requirements for X‐band portable wireless applications.     

Progress in deep-UV photoresists

Higher resolution can be achieved in lithography by decreasing the wavelength of the exposure source. However, resist material and their processing are also important when we move to a shorter wavelength lithography technology. This paper reviews the recent development and challenges of deep-UV photoresists and their processing technology.     

Effect of natural antioxidants and vacuum packaging on the quality of buffalo meat nuggets during refrigerated storage

Buffalo meat nuggets (BMN) were incorporated with 500 ppm sodium ascorbate, 10 ppm -tocopherol acetate and 0.5% sodium tripolyphosphate while processing. There were three experimental groups of BMN, namely control aerobic packaged (CAP), treated aerobic packaged (TAP) and treated vacuum packaged (TVP), refrigerated and stored at 4 °C. It was observed that the treated samples (TAP and TVP) had significantly (p < 0.05) higher pH, W-B shear force, moisture and protein contents, sensory attributes and lower free fatty acids content in comparison to CAP samples. Vacuum packed nuggets (TVP) had significantly (p < 0.05) lower free fatty acid content, higher lactobacilli and total anaerobe counts and markedly higher scores for flavour and overall palatability, even at the 25th day of storage. Product quality reduced as storage time increased. Use of natural antioxidants and vacuum packaging extended the shelf life of BMN from 10 to 30 days under refrigerated storage.     

Development of Iron-based Closed-Cell Foams by Powder Forging and Rolling

In the present investigation, an attempt has been made to develop in situ sandwich Fe-based foams using powder forging and rolling. Several metal carbonates are first studied by thermo gravimetric analysis to find out their suitability to be used as foaming agent for iron-based foams. Barium carbonate is found to be the most promising foaming agent among other suitable options studied such as SrCO₃, CaCO₃, MgCO₃, etc. The effects of process parameters such as precursor composition, sintering temperature, foaming temperature and time, and content of foaming agent have been studied. The microstructural characteristics of the sintered precursor have been studied by means of optical and scanning electron microscopy. It was found that a good pore structure can be obtained using 2-3% C in Fe and 3% BaCO₃ as foaming agent and by foaming at around 1350 °C for 3-6 min.     

Ultra Low-Dose Radiation: Stress Responses and Impacts Using Rice as a Grass Model

We report molecular changes in leaves of rice plants (Oryza sativa L. - reference crop plant and grass model) exposed to ultra low-dose ionizing radiation, first using contaminated soil from the exclusion zone around Chernobyl reactor site. Results revealed induction of stress-related marker genes (Northern blot) and secondary metabolites (LC-MS/MS) in irradiated leaf segments over appropriate control. Second, employing the same in vitro model system, we replicated results of the first experiment using in-house fabricated sources of ultra low-dose gamma (γ) rays and selected marker genes by RT-PCR. Results suggest the usefulness of the rice model in studying ultra low-dose radiation response/s.     

Synthesis and analysis of lead-free tungsten bronze ferroelectrics

The polycrystalline Ba₂Sr₃GdTi₃V₇O₃₀, a member of tungsten bronze structural family, was prepared by a solid-state reaction method at high temperature (calcination and sintering temperatures at 950 and 1,000 °C, respectively). Preliminary structural study showed that the compound has orthorhombic crystal structure at room temperature. Study of surface morphology of the compound by scanning electron microscopy exhibits the uniform grain distribution on the surface of the sample with less number of voids. The dielectric anomaly observed at 313 °C is considered as a ferroelectric-paraelectric phase transition temperature which has been confirmed by appearance of hysteresis loop at room temperature. The trend of variation of ac conductivity with inverse of absolute temperature provides the nature of conduction mechanism in the material. The different value of activation energy in different temperature regions suggests that the conduction process in the material is of mixed-type (i.e., ionic–polaronic and space charge due to the oxygen ion vacancies).