Role of situational method engineering to improve visual information systems in agile distributed environment

Software product prone to continuous evolution due to increase in the use of technology. Therefore, more stakeholders are involved in software evolution increases the cost and complexity. This required optimization of resources and cost to handle evolution with Global Software Development (GSD) to utilize time zones efficiently. The significance challenge of GSD reports: time zone difference, geographical location, communication delays, knowledge sharing, control among stakeholders and development team. Because of these challenges, the requirements for development in GSD environment are also challenge as compared to on site development. Different requirement engineering methods have been used to improve the requirements analysis to deal with ambiguities and inconsistency in large set of requirements. The customization and tailoring of requirements according to changing project’s situations required to improve project development with reusing existing agile methods during requirement engineering phase. Moreover, complex information systems where heterogeneity is inevitable that implies the involvement of divergent stakeholders and necessitate a comprehensive framework to capture multidimensional viewpoints and fulfill aforementioned issues. Therefore, a situational multi-dimensional agile requirement engineering method has been proposed to support team and stakeholders’ viewpoints. The schema of the proposed method is based on challenges recognized by performing Literature Review. Then proposed method has been evaluated via experimental approach and statistical analysis conducted to validated reliability of data collected. This result is significant approved both practically and statistically that the proposed approach ease to use, implement, trained and increased productivity and performance. Hence, the experimental study for the evaluation of the proposed approach results concluded that, proposed approach is the important multimedia tool for supporting organization and distributed development team for information sharing, collaboration, product development.

     

(BaTiO3)1-x + (Co0.5Ni0.5Nb0.06Fe1.94O4)x nanocomposites: Structure,morphology, magnetic and dielectric properties

Two phase-based nanocomposites consisting of dielectric barium titanate (BaTiO₃ or BTO) and magnetic spinel ferrite Co_0.5Ni_0.5Nb_0.06Fe_1.94O₄ (CNNFO) have been synthesized through solid state route. Series of (BaTiO₃)_1-x + (Co_0.5Ni_0.5Nb_0.06Fe_1.94O₄)_x nanocomposites with x content of 0.00, 0.25, 0.50, 0.75, and 1.00 were considered. The structure has been examined via X-rays diffraction (XRD) and indicated the occurrence of both perovskite BTO and spinel CNNFO phases in various nanocomposites. A phase transition from tetragonal BTO structure to cubic structure occurs with inclusion of CNNFO phase. The average crystallites size of BTO phase decreases, whereas that for the CNNFO phase increases with increasing x in various nanocomposites. The morphological observations revealed that the porosity is highly reduced, and the connectivity between grains is enhanced with increasing x content. The optical properties have been investigated by UV−vis diffuse reflectance spectroscopy. The deduced band gap energy (E_g) value is found to reduce with increasing the content of spinel ferrite phase. The magnetic as well as the dielectric properties were also investigated. The analysis showed that CNNFO ferrite phase greatly affects the magnetic properties and dielectric response of BTO material. The obtained findings can be useful to enhance the performances of magneto-dielectric composite-based systems.     

Modulation Based Combination of High Level Features Generated from SCCF & Contourlet Transforms for CBIR Applications

The need for suitable and cost-effective technologies rise with the growth of the internet of things (IoT) applications. These aim at handling voluminous data transmission in addition to minimum energy and latency cost constraints. LoRa networks are recommended for applications in confined spaces, long ranges, and less battery consumption requirements. However, the end devices in these networks communicate to all gateways in their ranges, thereby expediting energy unproductively in redundant transmissions. In our article, we explore the possibilities of whether LoRa networks could employ the advantages of clustering and propose two algorithms, path-based and data-centric, for such networks. We suggest that LoRaWAN technology with clustering can be apt for long-range, low power consumption IoT applications in the future. We study the impact of network density, node range, and cluster range on the energy consumption in data transmissions. The algorithms are compared with the inherent star-based communication of LoRa networks based on energy consumed, and our results show that, for dense deployments, clustering becomes advantageous.

     

The Double Edge Sword Based Distributed Executor Service

Scalability is one of the most important quality attribute of software-intensive systems, because it maintains an effective performance parallel to the large fluctuating and sometimes unpredictable workload. In order to achieve scalability, thread pool system (TPS) (which is also known as executor service) has been used extensively as a middleware service in software-intensive systems. TPS optimization is a challenging problem that determines the optimal size of thread pool dynamically on runtime. In case of distributed-TPS (DTPS), another issue is the load balancing b/w available set of TPSs running at backend servers. Existing DTPSs are overloaded either due to an inappropriate TPS optimization strategy at backend servers or improper load balancing scheme that cannot quickly recover an overload. Consequently, the performance of software-intensive system is suffered. Thus, in this paper, we propose a new DTPS that follows the collaborative round robin load balancing that has the effect of a double-edge sword. On the one hand, it effectively performs the load balancing (in case of overload situation) among available TPSs by a fast overload recovery procedure that decelerates the load on the overloaded TPSs up to their capacities and shifts the remaining load towards other gracefully running TPSs. And on the other hand, its robust load deceleration technique which is applied to an overloaded TPS sets an appropriate upper bound of thread pool size, because the pool size in each TPS is kept equal to the request rate on it, hence dynamically optimizes TPS. We evaluated the results of the proposed system against state of the art DTPSs by a client-server based simulator and found that our system outperformed by sustaining smaller response times.     

Defect Prediction Using Akaike and Bayesian Information Criterion

Data available in software engineering for many applications contains variability and it is not possible to say which variable helps in the process of the prediction. Most of the work present in software defect prediction is focused on the selection of best prediction techniques. For this purpose, deep learning and ensemble models have shown promising results. In contrast, there are very few researches that deals with cleaning the training data and selection of best parameter values from the data. Sometimes data available for training the models have high variability and this variability may cause a decrease in model accuracy. To deal with this problem we used the Akaike information criterion (AIC) and the Bayesian information criterion (BIC) for selection of the best variables to train the model. A simple ANN model with one input, one output and two hidden layers was used for the training instead of a very deep and complex model. AIC and BIC values are calculated and combination for minimum AIC and BIC values to be selected for the best model. At first, variables were narrowed down to a smaller number using correlation values. Then subsets for all the possible variable combinations were formed. In the end, an artificial neural network (ANN) model was trained for each subset and the best model was selected on the basis of the smallest AIC and BIC value. It was found that combination of only two variables’ ns and entropy are best for software defect prediction as it gives minimum AIC and BIC values. While, nm and npt is the worst combination and gives maximum AIC and BIC values.     

High-feed turning of AISI D2 tool steel using multi-radii tool inserts: Tool life,material removed,and workpiece surface integrity evaluation

Multi-radii tool inserts offer novel configuration that comprises of multiple radii at tool nose. A review of the available literature indicates that there exists a need for experimental investigation on certain key machining characteristics of such tools. This paper reports on tool wear/life, material removed, and workpiece surface roughness when multi-radii mixed alumina TiN coated tool inserts are employed for turning D2 steel. Inserts of three different nose radii (0.40, 0.80, 1.20?mm) at six levels of feed rates (ranging from 0.157 to 0.562?mm/rev) are used. Results show that flank wear is the dominant wear mode with catastrophic tool failure occurring at highest nose radius (1.20?mm) and feed rate (0.562?mm/rev) combination. Also, there is ～59% reduction in tool life accompanied by ～62% increase in quantity of material removed as the feed rate increases from 0.157 to 0.562?mm/rev at maximum nose radius (1.20?mm). Feed rate is found to be statistically significant factor for all three responses considered herein at 95% confidence level. Surface integrity assessment at maximum feed rate reveals presence of a strain hardened layer extending to the depth of 150?µm below the machined surface without any observance of white layer for all the tool conditions and nose radius.     

End-to-End 2D Convolutional Neural Network Architecture for Lung Nodule Identification and Abnormal Detection in Cloud

The extent of the peril associated with cancer can be perceived from the lack of treatment, ineffective early diagnosis techniques, and most importantly its fatality rate. Globally, cancer is the second leading cause of death and among over a hundred types of cancer; lung cancer is the second most common type of cancer as well as the leading cause of cancer-related deaths. Anyhow, an accurate lung cancer diagnosis in a timely manner can elevate the likelihood of survival by a noticeable margin and medical imaging is a prevalent manner of cancer diagnosis since it is easily accessible to people around the globe. Nonetheless, this is not eminently efficacious considering human inspection of medical images can yield a high false positive rate. Ineffective and inefficient diagnosis is a crucial reason for such a high mortality rate for this malady. However, the conspicuous advancements in deep learning and artificial intelligence have stimulated the development of exceedingly precise diagnosis systems. The development and performance of these systems rely prominently on the data that is used to train these systems. A standard problem witnessed in publicly available medical image datasets is the severe imbalance of data between different classes. This grave imbalance of data can make a deep learning model biased towards the dominant class and unable to generalize. This study aims to present an end-to-end convolutional neural network that can accurately differentiate lung nodules from non-nodules and reduce the false positive rate to a bare minimum. To tackle the problem of data imbalance, we oversampled the data by transforming available images in the minority class. The average false positive rate in the proposed method is a mere 1.5 percent. However, the average false negative rate is 31.76 percent. The proposed neural network has 68.66 percent sensitivity and 98.42 percent specificity.     

The mask of (2b + 4)-point n-ary subdivision scheme

In this paper, we present general formulae for the mask of (2b + 4)-point n-ary approximating as well as interpolating subdivision schemes for any integers ${b\,\geqslant\,0}$ and ${n\,\geqslant\,2}$ . These formulae corresponding to the mask not only generalize and unify several well-known schemes but also provide the mask of higher arity schemes. Moreover, the 4-point and 6-point a-ary schemes introduced by Lian [Appl Appl Math Int J 3(1):18–29, 2008] are special cases of our general formulae.     

Study on pharyngeal and uvular consonants in foreign accented Arabic for ASR

This paper investigates the unique pharyngeal and uvular consonants of Arabic from the point of view of automatic speech recognition (ASR). Comparisons of the recognition error rates for these phonemes are analyzed in five experiments that involve different combinations of native and non-native Arabic speakers. The most three confusing consonants for every investigated consonant are discussed. All experiments use the Hidden Markov Model Toolkit (HTK) and the Language Data Consortium (LDC) WestPoint Modern Standard Arabic (MSA) database. Results confirm that these Arabic distinct consonants are a major source of difficulty for Arabic ASR. While the recognition rate for certain of these unique consonants such as // can drop below 35% when uttered by non-native speakers, there is advantage to include non-native speakers in ASR. Besides, regional differences in pronunciation of MSA by native Arabic speakers require the attention of Arabic ASR research.