Development of Bi(Pb)-2223/Ag pancake-shaped and solenoidal coils

High temperature superconducting (HTSC) multifilamentary (MT) Bi(Pb)-2223/Ag tapes with reproducible critical current density of between 15000 and 20000 A/cm² at 77 K in self field have been achieved using the standard flat-rolling method as the intermediate deformation between sintering periods. Long lengths of Bi(Pb)-2223/Ag MT tapes up to 43 m prepared by the conventional method of powder-in-tube (PIT) have been successfully produced on a laboratory scale. Several coils have been fabricated from sections of the long length tape, using the co-wound wind-and-react (W&R) procedure for the pancake-shaped and the singly-wound W&R as well as R&W procedure for the solenoidal coils. A novel W&R solenoidal coil (reaching ~973 ampere-turns) wound on an alumina ceramic tube generates a DC field of ~19 mT at 77 K and has been fabricated together with five pancake-shaped coils, each generating an average of ~5 mT at 77 K. These are destined for magnet construction with a possible combined calculated field of ~0.04 T at 77 K (with liquid nitrogen as a coolant)     

A force modulation study on crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films

This paper introduces the Force Modulation technique to the study of crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films. Using this technique we have successfully visualized ferroelectric crystalline domains and observed that these ferroelectric domains grow out from amorphous phase, unite into strip-like structures, and finally congregate into a union. Force Modulation can weaken the influence of topography on imaging of ferroelectric domains, and reveal more details, which are difficult to be observed in topographical image.     

输气管道投产置换过程气体混合规律研究

目前国内输气管道置换工艺主要依据人工经验进行，存在较大的盲目性，导致天然气管道投产成本较高，安全风险较大，有必要对输气管线安全投产工艺进行科学、系统的研究，实现输气管道的安全、高效、经济投产模式。文章讨论了现有置换工艺中不同的置换方式，认为不加隔离器的置换方法具有置换效率高、费用低以及安全可靠等优点，是一种有前途的新工艺、新方法。同时，为确保置换过程的安全性，针对置换过程中注氮量确定的盲目性问题，采用模拟试验方法，研究了天然气与氮气、氮气与空气混合段在不同流速和背压下长度的变化规律，从而为确定合理的用氮量提供了理论依据。     

曹店灌区渠道防渗衬砌技术研究

详细介绍了引黄灌区干渠衬砌试验段的设计原则、方案以及冻胀观测技术 ,根据试验结果对不同防渗材料、不同结构形式的渠道衬砌方案的使用效果及经济指标进行了分析。     

FBOLES—outline of a frequency-based on-line expert system approach for fault diagnoses in nuclear power plants

The basic concept of a novel frequency-based on-line expert system (FBOLES) approach for on-line fault diagnoses in nuclear power plants has been presented previously. This paper reports further progress, and includes how to express the uncertainties of expert opinion in knowledge-bases and propagate then in inferences, and how to deal with imperfect knowledge-bases. It also describes the main elements of FBOLES and outlines how the system works under complex conditions including the dynamic behavior of signals during accidents, multiple failures, and on-line changes of plant operation mode. Its ability to diagnose root causes of accidents has been tested using the main steam and feedwater condensate systems of a full-scale, three-loop, 950 MW nuclear power plant simulated by the Tsinghua simulator. So far the results seem good.     

杀菌剂苯菌灵的结构鉴定及其核磁共振研究

用红外、质谱、核磁共振等手段确证了江阴农药厂合成的苯菌灵的化学结构,并进行了该化合物核磁共振谱线的归属。     

机载扫描成象系统的技术发展

叙述了机载扫描成象系统的发展,基本结构,特点及其应用.     

薄管板换热器的设计及薄管板计算的探讨

结合化肥厂丁辛醇装置薄管板换热器的设计 ,着重分析薄管板的特点 ,应用合理的计算方法对薄管板进行强度校核 ,验证这一新型换热器的安全性和经济实用性