Porous electrodes supported on ion-exchange membranes as electrochemical detectors for supercritical fluid chromatography

A conveniently assembled electrochemical cell, exploiting a porous electrode supported on a moist perfluorinated ion-exchange polymer, is proposed for profitable electrochemical detection in supercritical fluid chromatography. It consists of a porous Pt working electrode, contacted by the mobile phase from the chromatographic column, which is chemically deposited onto one side of a Nafion membrane. The rear uncoated side of this membrane, acting as a solid polymer electrolyte, is contacted by an electrolyte solution (1 M NaCl) contained in an internal compartment equipped with a Pt counter electrode and a Ag/AgCl, Cl(-) 1 M reference electrode. Ferrocene, eluted with supercritical carbon dioxide through a Spherisorb column installed in a supercritical fluid chromatographic system, was used as electroactive prototype analyte to test the performance of this detector, which turned out to be quite better than that provided by a conventional on-line UV absorbance detector. The recorded peaks were characterized by both a good reproducibility (4.5%) and a linear dependence of their height and area, which extended over a wide concentration range ( approximately 3 orders of magnitude). Moreover, they were not interfered by possible solvent front, unlike peaks recorded by the UV detector. The detection limit, estimated for a signal-to-noise ratio of 3 (4.2 x 10(-11) mol), was lower by approximately 1 order of magnitude than that found for the UV detector. Finally, the long-term stability of this detector was satisfactory in that only a approximately 6% decrease in the current responses was observed after a rather long period (2 months) of continuous use.     

General rules for the optimal external porosity of LC supports

We present a series of numerically calculated plate height and flow resistance data obtained for an idealized chromatographic support mimic with variable bed porosity (0.3 相似文献   

Applying sustainable technology for saving primary energy in the brewhouse during beer brewing

Wort boiling is the most energy intensive stage in the brewing process. For this reason considerable attention has been given to improve the efficiency of wort boiling systems. Alternative wort boiling technologies, such as low pressure boiling and high temperature wort boiling, have been studied in detail during the last decades, with a focus on the reduction of primary energy consumption. Recently, new boiling systems have been developed and commercialised. The new systems reduced the energy consumption still further and are all characterised by exerting a low thermal stress on the wort during boiling.In this review, an overview of wort boiling objectives, possibilities to reduce the thermal stress on wort and environmental aspects of wort boiling are discussed. Furthermore, recent wort boiling systems—i.e. dynamic low pressure boiling and boiling systems which are based on low thermal stress boiling in combination with volatile stripping (steam, film and vacuum stripping)—are given special attention.     

Modeling thermophoretic effects in solid-state nanopores

Local modulation of temperature has emerged as a new mechanism for regulation of molecular transport through nanopores. Predicting the effect of such modulations on nanopore transport requires simulation protocols capable of reproducing non-uniform temperature gradients observed in experiment. Conventional molecular dynamics (MD) method typically employs a single thermostat for maintaining a uniform distribution of temperature in the entire simulation domain, and, therefore, can not model local temperature variations. In this article, we describe a set of simulation protocols that enable modeling of nanopore systems featuring non-uniform distributions of temperature. First, we describe a method to impose a temperature gradient in all-atom MD simulations based on a boundary-driven non-equilibrium MD protocol. Then, we use this method to study the effect of temperature gradient on the distribution of ions in bulk solution (the thermophoretic effect). We show that DNA nucleotides exhibit differential response to the same temperature gradient. Next, we describe a method to directly compute the effective force of a thermal gradient on a prototypical biomolecule—a fragment of double-stranded DNA. Following that, we demonstrate an all-atom MD protocol for modeling thermophoretic effects in solid-state nanopores. We show that local heating of a nanopore volume can be used to regulate the nanopore ionic current. Finally, we show how continuum calculations can be coupled to a coarse-grained model of DNA to study the effect of local temperature modulation on electrophoretic motion of DNA through plasmonic nanopores. The computational methods described in this article are expected to find applications in rational design of temperature-responsive nanopore systems.     

Spontaneous organic cocoa bean box fermentations in Brazil are characterized by a restricted species diversity of lactic acid bacteria and acetic acid bacteria

Spontaneous organic cocoa bean box fermentations were carried out on two different farms in Brazil. Physical parameters, microbial growth, bacterial species diversity [mainly lactic acid bacteria (LAB) and acetic acid bacteria (AAB)], and metabolite kinetics were monitored, and chocolates were produced from the fermented dry cocoa beans. The main end-products of the catabolism of the pulp substrates (glucose, fructose, and citric acid) by yeasts, LAB, and AAB were ethanol, lactic acid, mannitol, and/or acetic acid. Lactobacillus fermentum and Acetobacter pasteurianus were the predominating bacterial species of the fermentations as revealed through (GTG)₅-PCR fingerprinting of isolates and PCR-DGGE of 16S rRNA gene PCR amplicons of DNA directly extracted from fermentation samples. Fructobacillus pseudoficulneus, Lactobacillus plantarum, and Acetobacter senegalensis were among the prevailing species during the initial phase of the fermentations. Also, three novel LAB species were found. This study emphasized the possible participation of Enterobacteriaceae in the cocoa bean fermentation process. Tatumella ptyseos and Tatumella citrea were the prevailing enterobacterial species in the beginning of the fermentations as revealed by 16S rRNA gene-PCR-DGGE. Finally, it turned out that control over a restricted bacterial species diversity during fermentation through an ideal post-harvest handling of the cocoa beans will allow the production of high-quality cocoa and chocolates produced thereof, independent of the fermentation method or farm.     

Epidermal cells on stubs used for detection of GSR with SEM-EDX: analysis of DNA polymorphisms

DNA from epidermal cells attached to the adhesive tape of stubs employed to collect and identify gunshot residue (GSR) with scanning electron microscope (SEM) was extracted, amplified with PCR and typed. The method allowed identification of specimens when attribution to a definite person was uncertain. These results also suggest that adhesive tape could be used as a non invasive method for obtaining biological material suitable for DNA analysis from the skin surface.     

The λ-scheme

A scheme for integrating the Euler equations of compressible flow in any hyperbolic case is presented. The scheme relies on the concept of characteristics but is strictly a finite difference scheme. Improvements is accuracy and physical consistence due to the scheme are discussed and results of its application to complex flows are shown.     

Electric field-assisted ion exchange strengthening of borosilicate and soda lime silicate glass

In this study, we investigate the effects of electric field-assisted ion exchange (EF-IE) on potassium for sodium ion exchanges of soda borosilicate and soda lime silicate glasses. The results show that applying an electric field (E-field) with the intensity of 1000 V cm⁻¹ for few minutes produces an exchanged layer with a thickness comparable to the conventional chemical strengthening for 4 hours. There is a critical E-field that increases the mobility and, therefore, the diffusion coefficient of the potassium ions in the glasses. The increase is, perhaps, related to the evolution of the glass structure due to the penetration of potassium ions under an E-field. Vickers indentations showed that strong compression is generated in the glass by EF-IE; however, the bending strength improvement is limited because of the presence of large surface defects and the stress distribution inhomogeneity.     

Dynamic scheduling of FMS using a real-time genetic algorithm

The paper presents a genetic algorithm capable of generating optimised production plans in flexible manufacturing systems. The ability of the system to generate alternative plans following part-flow changes and unforeseen situations is particularly stressed (dynamic scheduling). Two contrasting objectives represented by the reduction of machine idle-times, thanks to dynamic scheduling computation and the reduction of the makespan, are taken into account by the proposed system. The key-point is the real-time response obtained by an optimised evolutionary strategy capable of minimising the number of genetic operations needed to reach the optimal schedule in complex manufacturing systems.