Stability of viscoelastic liquid curtain

Thin liquid sheets occur in several practical applications. In curtain coating, a thin liquid sheet is formed and falls freely over a considerable height before it impinges onto a moving substrate. Precision curtain coating was developed for multi layer photographic films but its use has expanded to many different applications. One of the important limits of this process is the stability of the liquid curtain, which may define the minimal thickness that can be coated at a given web speed.The condition at which a low viscosity Newtonian liquid curtain breaks was first derived based on a simple balance between inertial and capillary forces. There is a critical flow rate below which the curtain becomes unstable. For viscoelastic liquids, the normal stress related to the stretching of polymer molecules as the liquid accelerates down the curtain changes the force balance. Here, the critical condition at which a viscoelastic liquid curtain breaks was determined as a function of the rheological properties of the liquid. The results show that high extensional viscosity liquids create more stable curtains. Liquid additives could be used to push the limits of curtain flow rates to smaller values and consequently to widen the operability window of the process.     

Stability of the lipid fraction of milk‐based infant formulas during storage

A study is made of the effects of storage (time and temperature) on the lipid fraction of four milk‐based adapted infant formulas with basically the same composition, though differing in the iron salt added (lactate or sulfate) and/or the vitamin E source (α‐tocopherol or α‐tocopherol acetate). Peroxide value, hydroperoxide C₁₈ percentage and thiobarbituric acid‐reactive substance (TBARS) content were used as indicators of lipid peroxidation. Fat contents remained stable throughout storage. Peroxide values increased from the first storage month and were affected by storage time, although they exhibited irregular behavior. Storage time and temperature affected hydroperoxide percentage, which was seen to be the earliest indicator of lipid oxidation, being measurable in newly manufactured formulas. TBARS values were only affected by storage time. No statistically significant differences were found among the four infant formulas for any of the lipid oxidation indicators.     

Preparation and characterisation of silica‐based nanoparticles for cisplatin release on cancer brain cells

In the present work, the preparation, characterisation, and efficiency of two different silica nanostructures as release vehicles of Cisplatin are reported. The 1‐hexadeciltrimethyl‐ammonium bromide templating agent was used to obtain mesoporous silica nanoparticles which were later loaded with Cisplatin. While sol–gel silica was very fast prepared using an excess of acetic acid during the hydrolysis–condensation reactions of tetraethylorthosilicate and at the same time the Cisplatin was added. Several physicochemical techniques including spectroscopies, electronic microscopy, X‐ray diffraction, N₂ adsorption–desorption were used to characterise the silica nanostructures. An in vitro Cisplatin release test was carried out using artificial cerebrospinal fluid. Finally, the toxicity of all silica nanostructures was tested using the C6 cancer cell line. The spectroscopic results showed the suitable stabilisation of Cisplatin into the two different silica nanostructures. A large surface area was obtained for the mesoporous silica nanoparticles, while low areas were obtained in the silica nanoparticles. Cisplatin was released faster from mesoporous silica channels than from inside of aggregates nanoparticles silica. Cisplatin alone, as well as, cisplatin released from both silica nanostructures exerted a toxic effect on cancer cells. In contrast, both silica structures without the drug did not exert any toxic effect.Inspec keywords: cellular biophysics, desorption, adsorption, biomedical materials, sol‐gel processing, silicon compounds, cancer, toxicology, nanofabrication, brain, condensation, mesoporous materials, nanoparticles, X‐ray diffraction, nanomedicine, drugs, aggregates (materials)Other keywords: mesoporous silica channels, silica‐based nanoparticles, cancer brain cells, silica nanostructures, 1‐hexadeciltrimethyl‐ammonium bromide, mesoporous silica nanoparticles, sol‐gel silica, C6 cancer cell line, in vitro cisplatin release test, C6 cancer cell line, acetic acid, hydrolysis‐condensation reactions, tetraethylorthosilicate, physicochemical techniques, electronic microscopy, X‐ray diffraction, N₂ adsorption‐desorption, artificial cerebrospinal fluid, toxicity, toxic effect, N₂ , SiO₂      

Local and global electrochemical impedances applied to the corrosion behaviour of an AZ91 magnesium alloy

The electrochemical behaviour of an AZ91 magnesium alloy was investigated in a low aggressive medium by means of local and global electrochemical impedance measurements. The results were compared to those obtained on a pure magnesium sample. It was possible to show the individual contribution of each phase constituting the alloy, and it was observed that the corrosion mechanism of the two phases was the same, controlled by the Mg dissolution. However, local impedance diagrams clearly indicated that the kinetics dissolution of the β-phase was slower than that of the α-phase, which was in good agreement with SEM observations.     

Is positive psychology only White psychology?

Comments on the special issue of the American Psychologist (2000[Jan], Vol 55[1]) on positive psychology. The author points out that in this special issue the perspectives of psychologists of color were not represented. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Latent inhibition in human affective learning.

This study presents the results of a new visual procedure designed to generate affective learning, namely the change in the affective rating of a previously. neutral stimulus by simply pairing it with a liked or disliked stimulus. Specifically, an experiment was conducted to evaluate the effect of nonreinforced preexposures to the to-be-conditioned stimulus (a non-sense shape) on affective conditioning. This manipulation, intended to produce latent inhibition, typically results in retarded learning when the preexposed stimulus is paired with the unconditioned stimulus. The results revealed that it is possible to modify the affective value of a previously neutral non-sense shape by pairing it with a liked or disliked unconditioned stimulus, and that latent inhibition affects affective conditioning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Time-Dependent Quantum-Mechanical Approaches to the Continuous Spectrum: Scattering Resonances in a Finite Box

Several novel aspects of scattering resonances are studied. An expression, valid for a finite box, relating the continuum phase shift with the energy shift and unperturbed level separation is proposed and applied to obtain the resonance parameters. The effect of the resonance on propagating a wavepacket in imaginary time is studied. It is observed that the resonance strongly affects the cumulants of the energy distribution. In particular, a local minimum of the first derivative of the energy with respect to time (proportional to the second cumulant) serves to estimate the resonance energy and wavefunction. Once the estimate is known, the autocorrelation function is used to evaluate the resonance width. Alternatively, a new iterative approach is developed that is capable of selectively yielding an arbitrary band of energy eigenvalues and eigenfunctions on a grid. This method is applied to give those energy levels that are of interest for the discrete computation of the resonant phase shift, i.e., those close to resonance. Exact (analytical) and approximate results are in good agreement for a particular separable potential model in one dimension. These methods can be extended to realistic potentials in higher dimensions.     

Variation of poly(vinylidene fluoride) morphology due to radial cold flow in a flexible pipe

A subsea flexible pipe containing isotropic poly(vinylidene fluoride) (PVDF) layers is subjected to rapid decompression after being put in pressurized equilibrium with a fluid containing supercritical CO₂. The PVDF layers have flowed radially into gaps of adjacent metallic coils forming whitened noses. Microbeam small‐angle X‐ray scattering (SAXS) scanning reveals a considerable morphological gradient in the polymer layers. PVDF layers (inner: wear, outer: barrier) in two zones (undamaged and damaged) are scanned. Far from noses and damage zone, the samples are isotropic without voids. Their morphological parameters are determined and compared to virgin material. Approaching the noses, the structure turns into highly oriented microfibrils perpendicular to the local flow into the gaps. Here, voids extend parallel to the microfibrils. At edges of the metallic structure, they turn more perpendicular to the layer. Crystallite orientation extends out to both sides of the whitened nose regions, but in the undamaged samples, tilting of the orientation direction and void‐formation are restricted to the white regions: successive mechanisms of cold drawing are mapped into space. Under the damaged spot, voids and crystallite orientation extend through the entire layer. POLYM. ENG. SCI., 55:2869–2877, 2015. © 2015 Society of Plastics Engineers     

A bi‐criterion optimization approach for the design and planning of hydrogen supply chains for vehicle use

In this article, we address the design of hydrogen supply chains for vehicle use with economic and environmental concerns. Given a set of available technologies to produce, store, and deliver hydrogen, the problem consists of determining the optimal design of the production‐distribution network capable of satisfying a predefined hydrogen demand. The design task is formulated as a bi‐criterion mixed‐integer linear programming (MILP) problem, which simultaneously accounts for the minimization of cost and environmental impact. The environmental impact is measured through the contribution to climate change made by the hydrogen network operation. The emissions considered in the analysis are those associated with the entire life cycle of the process, and are quantified according to the principles of Life Cycle Assessment (LCA). To expedite the search of the Pareto solutions of the problem, we introduce a bi‐level algorithm that exploits its specific structure. A case study that addresses the optimal design of the hydrogen infrastructure needed to fulfill the expected hydrogen demand in Great Britain is introduced to illustrate the capabilities of the proposed approach. © 2009 American Institute of Chemical Engineers AIChE J, 2010     

A Solvent‐Free Dispersion Method for the Preparation of PET/MWCNT Composites

A simple, easily accessible solvent‐free method for the dispersion of MWCNTs into PET is proposed, based on the preparation of a microparticulate polymer/nanotube masterbatch via cryogenic impact‐milling and its subsequent melt blending with the bulk polymer. Thermal and mechanical properties of nanocomposites prepared using this method were evaluated as a function of nanotube concentration. Thermal stability was improved, and superior crystallization behavior of PET in the nanocomposites was observed. Significant improvements of around 25% in tensile strength and tensile modulus of the nanocomposites was achieved using this strategy, with only 0.25 wt.‐% MWCNT, compared to previous literature data where 1 wt.‐% MWCNT was employed.