井口信号无线数传系统

目的　介绍了井口信号无线数传系统的设计 .方法　无线数传、低功耗电路设计 .结果　省去了井口信号线 ,降低了井口工作量 .结论　提高了测量精度和可靠性     

太原市城南地区汾河与东岸防洪隐患与出路

本文对当前城南地区汾河以东防洪存在的诸多隐患进行了阐述，并提出了相应的见解与措施。     

TBM地区低孔渗高产气储层预测

 本文从TBM地区目的层的地质和地球物理特征分析出发，以三维地震资料为基础，综合利用人工和神经网络波形分类等定性储层预测方法和利用反演及敏感地震属性分析，对TBM地区低孔渗砂岩分布区开展了砂体展布特征分析和天然气高产区预测研究。根据研究结果部署了10口钻井，已完钻的4口井中有3口获得高产气流（其中DK27井日产天然气36.8×10⁴m³）。值得指出的是，目前所用的预测方法还不能预测厚度小于6m的单砂层或砂层组构成的储层。     

臭氧氧化-光催化降解水中的五氯酚

利用臭氧氧化-光催化技术降解水中的有机污染物五氯酚(PCP)。对比了紫外光照射、臭氧氧化、光催化、臭氧氧化-光催化4种方法降解PCP的情况。考察了臭氧氧化-光催化体系中臭氧流量、臭氧产量、PCP初始质量浓度、pH和CO23-等因素对PCP降解率的影响。实验结果表明,臭氧氧化-光催化法比单独使用紫外光照射、臭氧氧化、光催化法更能有效的去除PCP;增加臭氧流量和臭氧产量有利于提高PCP的降解率;降低PCP的初始浓度,PCP的降解率显著提高;pH对PCP的降解效果影响不明显;CO23-的存在显著降低了PCP的降解率。在臭氧氧化-光催化体系中,除臭氧直接氧化降解PCP外,臭氧与TiO2协同作用产生的.OH对PCP的降解也起到了重要作用。     

变压吸附制氧设备真空风机入口压力低分析和处理

介绍了邯钢动力厂真空变压吸附制氧设备的工艺流程,从切换阀本体、电磁阀及仪表气源等方面分析和总结了真空风机入口压力低引起系统联锁停车故障原因,并介绍了相应的处理措施。     

商场照明设计中几点节电措施

我国照明用电量占全国发电总量的12％左右,节约照明用电不仅减轻国家电力供应的压力,而且还保护了环境。大、中型商场照明用电量一般都很大,设计商场时,怎样才能做到投产后节约电能,通过多年设计实践总结出几点措施。     

降低钛材价格、促进钛在舰船上的应用

舰船是武器装备和兵员在水上或水下的运动作战平台。空船质量很大。钛材是一种优秀的舰船结构材料，已广泛应用于潜艇壳体、机电设备中，但价格昂贵，用于空船质量的比例还很少，从设计质量分析中阐明，铁材降价1／3将有利于代替铜合金和不锈钢，在舰船上广泛推广。     

Parallelization of WHILE loops on pipelined architectures

Modulo scheduling theory can be applied successfully to overlap Fortran DO loops on pipelined computers issuing multiple operations per cycle both with and without special loop architectural support. This paper shows that a broader class of loops—REPEAT-UNTIL, WHILE, and loops with more than one exit, in which the trip count is not known beforehand—can also be overlapped efficiently on multiple-issue pipelined machines. The approach is described with respect to a specific machine model, but it can be extended to other models. Special features in the architecture, as well as compiler representations for accelerating these loop constructs, are discussed. Performance results are presented for a few select examples.An earlier version of this paper was presented at Supercomputing '90.     

基于多代理技术的传感器管理系统

针对分布式对空监视网中混合式传感器管理结构存在的问题，提出了基于多代理技术的混合式传感器管理结构。该结构较好地克服了混合式管理结构中在融合中心存在的瓶颈问题，通过多个传感器代理、融合中心代理之间的相互协商来实现传感器任务的分配。传感器代理与传感器相结合使传感器的工作模式实现高度的自动化和模块化，便于传感器的灵活组网。     

An Interval Fuzzy Multiobjective Watershed Management Model for the Lake Qionghai Watershed, China

Integrated watershed management is required to ensure the reasonable use of resources and reconcile interactions among natural and human systems. In the present study, an interval fuzzy multiobjective programming (IFMOP) method was used to solve an integrated watershed management problem. Based on system analysis, an IFMOP model suitable for a lake watershed system {IFMOPLWS} was developed and applied to the Lake Qionghai watershed in China. Scenario analysis and an interactive approach were used in the solution process. In this manner, various system components were incorporated into one framework for holistic consideration and optimization. Integrality and uncertainty, as well as the multiobjective and dynamic characteristics of the watershed system, were well addressed. Using two scenarios, two planning schemes were generated. Agriculture, tourism, macroeconomics, cropland use, water supply, forest coverage, soil erosion, and water pollution were fully interpreted and compared to identify a preferable planning alternative for local agencies. This study showed that the IFMOPLWS is a powerful tool for integrated watershed management planning and can provide a solid base for sustainable watershed management.