聚丙烯酸酯类柴油降凝剂的改性研究

主要目的是对聚丙烯酸酯类降凝剂进行改性研究,实验以丙烯酸和十八醇为原料,采用直接酯化法合成丙烯酸十八酯,将其分别与马来酸酐、苯乙烯和乙酸乙烯酯合成聚合物,通过红外光谱仪进行检测,证实聚合物合成成功,最后分别考察三种聚合物及复配的降凝效果。实验结果表明：苯乙烯-乙酸乙烯-聚丙烯酸十八酯的降凝效果最好,对南充炼油总厂0#柴油,凝点可降低15℃,将该聚合物与吐温-20和斯盘-40进行复配,聚合物的降凝效果有所改善。     

特种表面活性剂和功能性表面活性剂(Ⅻ)——环糊精及其衍生物的制备与性能

简单介绍了常用的α-,β-和γ-环糊精(CD)的结构和性能,重点综述了环糊精各类衍生物(包括醚类、酯类、去氧类和聚合物类等,其中聚合物类包括交联型、线形和固载化3种类型)和包结复合物的制备方法及性能,并对其今后的发展进行了展望。     

尿素装置DCS防雷增强措施

介绍了雷击的形式及防雷基本技术.分析了山东兖矿峄山化工有限公司受雷击的主要原因,着重介绍了三期尿素装置DCS系统的防雷增强措施.     

解络合时间对UHMWPA6纤维结构与性能的影响

以甲酸为溶剂、相对粘度18.85的超高相对分子质量聚己内酰胺(UHMWPA6)为溶质制备纺丝液,同时加入络合剂CaCl2,通过干法纺丝制备UHMWPA6初生纤维;以水为解络合剂,对初生纤维初拉伸后进行解络合反应,研究了解络合时间对所得纤维的结构及性能的影响.结果表明:随着解络合时间的延长,UHMWPA6初拉伸纤维的断裂...     

Direct transformation of calcium sulfite to α-calcium sulfate hemihydrate in a concentrated Ca-Mg-Mn chloride solution under atmospheric pressure

Massive quantities of sulfite-rich flue gas desulfurization (FGD) scrubber sludge have been generated by coal burning power plants. Utilization of the sulfite-rich sludge for preparing α-calcium sulfate hemihydrate (α-HH), an important kind of cementitious material, is of particular interest to electric utilities and environmental preservation. In the experiment, calcium sulfite hemihydrate was directly transformed to α-HH without the occurrence of calcium sulfate dihydrate (DH). The transformation was performed in a concentrated CaCl2 solution containing Mg2+ and Mn²⁺ at 95 °C, atmospheric pressure and low pH. The oxidation of calcium sulfite and the subsequent crystallization of α-HH constitute the whole conversion, during which the oxidation turns out to be the rate controlling step. Solid solution comprised of calcium sulfite hemihydrate and calcium sulfate was found to coexist with α-HH in the suspension. Calcium sulfate increases and calcium sulfite decreases spontaneously until the solid solution disappears. Thus, it is a potential alternative to utilize sulfite-rich FGD scrubber sludge for the direct preparation of α-HH.     

Hydrophilic modification of P(VDF-co-CTFE) porous membranes

This paper describes fabrication of a poly(vinylidene difluoride-co-chlorotrifluoroethylene) (P(VDF-co-CTFE)) porous membrane via non-solvent induced phase inversion and subsequent hydrophilic modification using high efficient surface initiated atom transfer radical polymerization (ATRP). The effect of viscosities of casting solutions on microstructures of the P(VDF-co-CTFE) membrane was investigated. The surface chemistry, thermal stability, morphological structure, and hydrophilicity of the modified membranes were evaluated by Fourier Transform Infrared Attenuated Total Reflection (FTIR-ATR), Differential Scanning Calorimeter (DSC), Scanning Electron Microscope (SEM), and contact angle measurements, respectively. The degree of grafting and the degree of swelling were measured to analyze the effect of polymerization time on the wettability. The mechanical strength of the membranes after modification was also investigated. The permeability and fouling resistance were evaluated according to pure water flux and protein solution filtration measurements. The results demonstrate that the hydrophobic P(VDF-co-CTFE) membrane can be feasibly modified by immobilization of hydrophilic poly(ethylene glycol) methyl ether methacrylate (PEGMA) brushes via surface initiated ATRP.     

Reaction Engineering Approach (REA) to model the drying kinetics of droplets with different initial sizes—experiments and analyses

Droplets with different initial sizes, which are typical in conventional liquid atomization for spray drying applications, will result in varying drying and crust formation histories. It is essential for any droplet drying model to accurately capture such fundamental phenomena. This study used a newly constructed glass-filament single droplet rig to evaluate the applicability of the Reaction Engineering Approach (REA) in describing such effect. For the three initial sizes (1, 2 and 3 μL) tested, the glass filament gravimetric method clearly distinguished the different drying kinetics and the crust formation phenomenon, delineated by the drying behavior. Analysis from the drying kinetics revealed that the main premise of the REA, which utilizes a material-specific master activation energy curve, is applicable to droplets of different initial sizes at all the three air temperatures tested. This allowed the REA to accurately predict the different temperature and moisture histories given by droplets with different initial sizes. The result supports the REA as a good modeling approach for a wide range of initial droplet conditions. A new master curve approach was proposed to predict the diameter change of droplets with different initial concentrations. Validation with the current and past experimental data revealed that this approach has strong potential to account for the different feed concentrations typically found in spray drying applications.     

Unique hue data for colour appearance models. Part I: Loci of unique hues and hue uniformity

Psychophysical experiments were conducted to assess unique hues on a CRT display for a large sample of colour‐normal observers (n = 185). These data were then used to evaluate the most commonly used colour appearance model, CIECAM02, by transforming the CIEXYZ tristimulus values of the unique hues to the CIECAM02 colour appearance attributes, lightness, chroma and hue angle. We report two findings: (1) the hue angles derived from our unique hue data are inconsistent with the commonly used Natural Color System hues that are incorporated in the CIECAM02 model. We argue that our predicted unique hue angles (derived from our large dataset) provide a more reliable standard for colour management applications when the precise specification of these salient colours is important. (2) We test hue uniformity for CIECAM02 in all four unique hues and show significant disagreements for all hues, except for unique red which seems to be invariant under lightness changes. Our dataset is useful to improve the CIECAM02 model as it provides reliable data for benchmarking. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2011     

Mechanism of degradation of poly(p‐phenylene benzobisoxazole) under hydrolytic conditions

Poly(p‐phenylene benzobisoxazole) (PBO) fiber has received great interest because of its excellent mechanical properties and good thermal stability. The objective of this study was to expose degradation mechanism of PBO under neutral and acidic conditions by molecular mass and Fourier transform infrared (FTIR) spectroscopy. Results were not consistent with the classic degradation mechanism, which indicates that degradation should occur through the ring opening and chain scission of the benzoxazole ring. The FTIR absorption spectra of PBO suggested that the o‐hydroxy amide linkage (the open ring structure) was present in the PBO molecule chain to some extent because of the incomplete polymerization. Further investigation showed that hydrolysis might occur in the open ring section during hydrolytic degradation. Based on the experimental data, a new degradation mechanism was proposed. It suggests that, in the early and middle stages, hydrolysis occurred primarily in the o‐hydroxy amide linkage of the open ring. The concentration of the o‐hydroxy amide structure determined the speed of degradation of PBO. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Fracture toughness of polyamide 6/maleated ethylene–propylene–diene terpolymer rubber/nano calcium carbonate ternary composites according to essential work of fracture analysis

Polyamide 6 (PA6)/maleated ethylene–propylene–diene terpolymer rubber/nano calcium carbonate ternary composites were prepared. The effect of the compounding route on the morphology, toughness, and fracture behavior of the ternary composites were investigated by scanning electron microscopy, Charpy impact testing, and essential work of fracture (EWF) testing. The construction of sandbag microstructure particles in PA6 matrix was crucial to the toughness of the ternary composites. The Charpy impact strength and the specific essential work of fracture (w_e) of the ternary composites with a sandbag microstructure were 137.9 and 71.4% higher, respectively, than those of the ordinary ternary composites with a separated dispersion microstructure. The observation of the fracture surface after EWF testing indicated that the improvement of w_e was attributed to the sandbag microstructure particles; this structure was more effective for resisting the growth of cracks; meanwhile, the influence of the amount of fibrillation on the nonspecific essential work of fracture, including the nonspecific essential work of fracture before yielding and that in the necking–tearing stage, was insignificant. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011