发光体MAl2O4:Eu2+,RE3+的长余辉形成机理

提出了Eu^2 激活的MAl2O4:Eu^2 ,RE^3 （M＝Ca,Sr,Ba;RE=Dy,Nd,Ho,Er,Pr,Tb等稀土元素）系列铝酸盐发光体的长余辉发光机理。认为O^2-空位Vo是一种电子俘获陷际，是形成余辉的根本原因，RE^3 的引入使陷阱深度适宜而使余辉时间延长。缺陷在晶格中成簇分布，Vo和碱土金属离子空位VM在高温下可相互缔合。利用电子陷阱模型解释了实验中的一些普遍现象并提出了固相反应法合成此类发光体的工艺改进措施。     

YAG：Nd激光照射犬气管粘膜的实验研究

An experimental study for the pathologic changes of the canine tracheal mucosa under YAG:Nd laser ablation was performed in order to master the appropriate parameters for the clinical treatment of YAG:Nd laser. 6 male and female Mongolia dogs weighing 13-18 kg were received 20W YAG:Nd laser treatment and their pathologic changes were examined instantly and 3, 7, 14 and 28 days after ablation.     

Constrained Drying of Aqueous Yttria-Stabilized Zirconia Slurry on a Substrate. I: Drying Mechanism

Aqueous yttria-stabilized zirconia slurry was cast on a substrate to form wet coatings. Both weight loss and thickness reduction were measured, during the drying process. Lateral drying was observed by in situ monitoring of the coating surface. The drying kinetics were classified as an initial constant rate period (CRP), followed by a falling rate period (FRP). Thickness reduction occurred in the CRP stage, and was uneven across the coating because of lateral flow. As tensile stresses developed within the coating because of the constrained volume shrinkage, crack formation and propagation occurred in the FRP stage and affected the drying rate.     

基于DTC的井下架线式电机车变频调速装置设计与应用

分析了井下架线式电机车运行现状及存在的维护量大、维护成本高、故障率高等问题.设计了一种基于DTC的电机车电机变频调速装置,现场应用情况表明其具有起动力矩大、维护量小、故障率低、节约成本的优点.指出了应用DTC变频调速技术改造传统的矿用架线式电机车直流传动系统的必要性及应用前景.     

Effect of polymerization conditions on o‐phenylenediamine and o‐phenetidine oxidative copolymers

A series of new o‐phenylenediamine (OPD)/o‐phenetidine (PHT) copolymers with partly phenazine‐like structures has been successfully synthesized at three polymerization temperatures by chemically oxidative polymerization in four different polymerization media. The molecular structures and properties of the resulting OPD/PHT polymers were investigated by IR, UV–vis and high‐resolution ¹H NMR spectroscopies, and DSC, in order to ascertain the effect of reaction temperature, comonomer ratio and acid medium. The copolymerization mechanism of OPD with PHT monomers has been proposed. It is found that the statistical OPD/PHT copolymer obtained at a temperature of 118 °C has a higher degree of polymerization than that obtained at 12–17 °C. The OPD content in the copolymers calculated from NMR spectroscopic analysis is higher than that in the feed OPD content, whereas the OPD content calculated from element analysis is slightly lower than the feed OPD content. It can be predicted that denitrogenation takes place in the OPD units during the polymerization process at OPD/PHT molar ratios of 90/10 and 100/0. These OPD/PHT copolymers exhibit a much better solubility than the OPD homopolymer, hence suggesting an incorporation of PHT units into the phenazine structure of the homopolymer. The thermal behavior of the copolymers was also studied. Copyright © 2004 Society of Chemical Industry     

ZL2.8/194型回热式气体制冷机故障分析与处理

对ZL2．8／194型回热式气体制冷机构造进行简要的叙述，分析了四个缸压力不平衡的故障原因，介绍了常见典型故障的处理办法，并提出维修时几点注意事项。     

硫含量对钴钼型耐硫脱氧剂的脱氧活性影响

研究了工艺气中硫含量对钴钼型耐硫脱氧剂脱氧活性的影响。通过常压微反 -色谱装置测定脱氧剂的本征脱氧活性 ,加压原粒度反应器测定脱氧剂的表观脱氧活性 ,结合实际经验确定了耐硫脱氧剂所需的最低硫含量。还讨论了温度、压力、空速对耐硫脱氧剂脱氧活性的影响。结果表明 ,耐硫脱氧剂完全能满足耐硫变换工艺的要求 ,而且有耐硫变换的作用 ,并对耐硫变换催化剂起到保护作用