Methane absorption and application of mixed organic aggregate prepared from Span80 and alkaline salt

The water-based materials for mine gas absorption and explosion suppression were prepared, in which the mixed organic aggregate of Span80 and alkaline salt can be used as methane absorbent. Methane was used as a model of mine gas, and the absorptions of methane with different complex materials were studied using head space gas chromatography. Then the state of aqueous material was characterized with laser light scattering instrument and the effects of different complex materials on explosion suppression were preliminarily studied in explosion chamber which can simulate mine gas explosion. The research results showed that complex material could absorb methane and there was some correlation between the mean diameter of organic aggregate in aqueous material and the absorption effect. Additionally, the aqueous material could suppress the methane explosion to some degree. The material can absorb mine gas in atomization condition, therefore, degrease mine gas concentration and influence the distribution of mine gas in the space, and then suppress the mine gas explosion to some extent.     

Photocatalytic performance of TiO<Subscript>2</Subscript> thin films connected with Cu micro-grid

Aiming at reducing the recombination of photo-induced carriers in semiconductor photocatalytic process, we prepared TiO₂ thin film with its surface modified by a connected Cu micro-grid via a microsphere lithography strategy, which showed higher photocatalytic activity than the pure TiO₂ film. The improvement of photocatalytic activity of Cu micro-grid to the TiO₂ film is due to the charge carrier separation and electron transfer by the conducting metal grid. The photocatalytic activity was improved as metal loading increased, which obtained the best performance at a certain loading amount, and then decreased at higher loading amount. This phenomenon was attributed to the metal’s bulk effect which could be explained by the relationship between the energetic positions and the metal cluster size. Supported by the National Natural Science Foundation of China (Grant Nos. 50672003, 50872005) and the National Basic Research Program of China (“973” Project) (Grant No. 2007CB613302) and the Fok Ying Tong Education Foundation (Grant No. 111050)     

Viscous liquid sloshing damping in cylindrical container using a volume of fluid method

Liquid sloshing is a kind of very complicated free surface flow and exists widely in many fields. In order to calculate liquid sloshing damping precisely a volume of fluid method based on finite volume scheme is used to simulate free surface flows in partly filled cylindrical containers. A numerical method is presented to simulate the movement of the free surface flow, in which a piecewise linear interface construction scheme and an unsplit Lagrangian advection scheme instead of Eulerian advection scheme are used. The damping performance of liquid sloshing in cylindrical containers under fundamental sloshing mode is investigated. There are four factors determining the surface-wave damping: free surface, boundary-layer, interior fluid and contact line. In order to study different contributions from these four factors to whole damping, several examples are simulated. No-slip and slip wall boundary conditions on both side wall and bottom wall of the cylindrical containers are studied to compare with the published results obtained by solving Stokes equations. In the present method the first three main factors can be considered. The simulation results show that the boundary-layer damping contribution increases while the interior fluid damping contribution decreases with increase of Reynolds number. Supported by the National Natural Science Foundation of China (Grant No. 10532010)     

Field measurement on wind characteristic and buffeting response of the Runyang Suspension Bridge during typhoon Matsa

Field measurement on wind characteristic and buffeting response of existing bridge is of great value to the development of bridge wind engineering, and the structural health monitoring system (SHMS) employed in many long-span bridges provide a research basis for the field measurement. In order to provide reliable basis for wind resistant evaluation of Runyang Suspension Bridge (RSB), two anemometers and 85 accelerometers were installed in the SHMS of RSB. In August 2005, Typhoon Matsa crossed over Jiangsu, the SHMS timely recorded the typhoon and structural vibration responses. In this paper by using the time-frequency technique and statistical theory, the recorded data were analyzed to obtain the strong wind characteristics, the buffeting response characteristics of the cable and deck, and the variation of buffeting response RMS versus wind speed. Results obtained in this study can be employed to validate the credibility of current buffeting response analysis theory techniques, and provide reference values for wind resistant evaluation of other long-span bridges. Supported by the National Hi-Tech Research and Development Program of China (“863” Project) (Grant No. 2006AA04Z416), the Key Project of the National Natural Science Foundation of China (Grant No. 50538020) and the Outstanding Youth Fund of the National Natural Science Foundation of China (Grant No. 50725828)     

Controlled growth and photoluminescence of highly oriented arrays of ZnO nanocones with different diameters

Large-scale oriented ZnO nanocone arrays were directly grown on zinc substrate through a hydro-thermal reaction of Zn foil with aqueous butylamine solution(3 mol/L) at 100—180 ℃ for 12 h.The syn-thesized products were characterized with X-ray diffraction,Raman spectrum,scanning electron mi-croscopy and transmission electron microscopy.The results showed that the ZnO nanocones were single crystalline with the wurtzite structure and grown along the [0001] direction.The diameter of nanocones is decreased with ...     

Research on the friction and wear mechanism of Poly(vinyl alcohol)/hydroxylapatite composite hydrogel

Poly(vinyl alcohol)/Hydroxylapatite (PVA/HA) composite hydrogel was prepared with poly(vinyl alcohol) and hydroxylapatite as raw materials, using the method of repeated freezing and thawing. The morphologies of PVA/HA composite hydrogel were observed by means of high-accuracy 3D profiler and scanning electron microscope (SEM). The compressive elastic modulus and the stress relaxation characteristics of PVA/HA composite hydrogel were measured using the flat-head cylinder indenter. The friction and wear tests between PVA/HA composite hydrogel and bovine knee articular cartilage were performed on the micro-tribometer. The worn morphologies of PVA/HA composite hydrogel were observed with environmental scanning electron microscope (ESEM). The results showed that PVA/HA composite hydrogel has the cross-link network microstructure which is similar to that of the natural bovine knee articular cartilages. With the increase of freezing-thawing cycles and the HA content, the degree of cross-link and the crystallization of PVA/HA composite hydrogel both increase, the elastic modulus increases evidently, the rate of stress relaxation is improved and the value of balance stress decreases. The friction coefficient decreases with the increase of the freezing-thawing cycles and the HA content. The more the freezing-thawing cycles are, the earlier the friction coefficient reaches the stable balance value. The friction deformation depth between PVA/HA composite hydrogel and bovine knee articular cartilage is inversely proportional to freezing-thawing cycles and the HA content. The main wear mechanisms of PVA/HA composite hydrogel are plastic flowing and adhesive flaking. The wear severity degree decreases with the increase of freezing-thawing cycles and the HA content. Supported by Key Program of the National Natural Science Foundation of China (Grant No. 50535050), Program for New Century Excellent Talents in University (Grant No. NCET-06-0479) and Natural Science Foundation of Jiangsu Province (Grant No. BK2005403)     

Numerical simulation of electroosmotic flow in hydrophobic microchannels

Electroosmotic flow (EOF) is a promising way for driving and mixing fluids in microfluidics. For the parallel-plate microchannel with the hydrophobic surface, this paper solved the governing equations using the finite element method (FEM), and the effects of microchannel height, electric strength and ionic concentration on EOF were thus investigated. The simulation indicates that the transient characteristics of EOF are similar in hydrophobic and hydrophilic microchannels, the steady time of EOF is proportional to the square of microchannel height, and the scale is microsecond. EOF velocity is proportional to the electric strength and independent of the channel height, and decreases slowly with the ionic concentration, which is lower than that in hydrophilic microchannel due to the presence of slip length in hydrophobic microchannel. The results can provide valuable insights into the optimal design of microchannel surfaces to achieve accurate EOF control in hydrophobic microchannel. Supported by the National Natural Science Foundation of China (Grant No. 50730007)     

Research on polyfluorene derivatives end-capped by N-hexyl-carbazole and benzene

Copolymers of 9,9-dioctylfluorene (DOF) and 2-thienyl-benzothiadiazole (DBT) were synthesized by Suzuki reaction and end-capped by N-hexyl-carbazole and benzene, which were abbreviated as PDOF-DBT-Cz and PDOF-DBT-B, respectively. The photophysical, electrochemical and thermal properties of the copolymers were studied. The results indicated that replacement of N-hexyl-carbazole as end-capping group of PDOF-DBT can vary light color and improve luminescence efficiency. Supported by the Major Project of Science Foundation Ministry of Education of China (Grant No. 207015) and the National Natural Science Foundation of China (Grant No. 20671068)     

Ultralight X-type lattice sandwich structure (I): Concept,fabrication and experimental characterization

A new type of ultra-lightweight metallic lattice structure (named as the X-type structure) is reported. This periodic structure was formed by two groups of staggered struts in the traditional pyramid structure, and fabricated by folding expanded metal sheet along rows of offset nodes and then brazing the folded structure (as the core) with top and bottom facesheets to form sandwich panels. The out-of-plane compressive and shear properties of the X-type lattice sandwich structure were investigated experimentally and compared to those of the sandwich having a pyramidal truss core. It is found that the formation of the 2-dimensional staggered nodes can effectively make the X-type structure more resistant to inelastic and plastic buckling under both compression and shear loading than the pyramidal lattice truss. Obtained results show that the compressive and shear peak strengths of the X-type lattice structure are about 30% higher than those of the pyramidal lattice truss having the same relative density. Supported by the National Basic Research Program of China (“973” Project) (Grant No. 2006CB601202), the National Natural Science Foundation of China (Grant Nos. 10632060,10825210), the National “111” Project of China (Grant No. B06024) and the National High-Tech Research and Development Program of China (“863” Project) (Grant No. 2006AA03Z519)     

Study on hydrogen atom adsorption and diffusion properties on Mg (0001) surface

Hydrogen atom adsorption and diffusion properties on clean and vacancy defective Mg (0001) surface have been investigated systematically by using a first-principles calculations method based on the density functional theory. The calculation results of adsorption energy and diffusion energy barrier show that hydrogen atom is apt to be adsorbed at fcc and hcp sites on clean Mg (0001) surface, and fcc adsorption site is found to be more preferred. The highest diffusion energy barrier is estimated as 0.6784 eV for the diffusion of hydrogen from clean Mg (0001) surface into its bulk. Surface effects, which affect hydrogen diffusion obviously, results in a slow diffusion velocity of hydrogen from surface to subsurface, while a fast one from subsurface to bulk, indicating the range of surface effects is only restricted within two topmost layers of Mg (0001) surface. Comparatively, Mg atom vacancy on Mg (0001) surface not only enhances the chemisorption interaction between H and Mg surface, but also benefits H atom diffusion in Mg bulk with relatively more diffusion paths compared with that of clean surface. Besides, hydrogen atom is found to occupy mostly the tetrahedral interstice when it diffuses into the Mg bulk. Further analysis of the density of states (DOS) shows that the system for hydrogen atom to be adsorbed at fcc site has a lower DOS value (N (E _F)) at Fermi level and more bonding electrons at the energy range blow the Fermi level of H/Mg (0001) system as compared with that at hcp site. On the other hand, the enhanced chemisorption interaction between hydrogen and defective surface should be attributed to the fact that the electronic structures of Mg (0001) surface are modified by an Mg vacancy, and the bonding electrons of the topmost layer Mg atoms are transferred from low energy range to Fermi level, which is in favor of improving the surface activity of Mg (0001) surface. Supported by the PhD Programs Foundation of Ministry of Education of China (Grant No. 200805321032), the Science and Technology Program Project of Hunan Province (Grant No. 2008GK3083) and the Program for Changjiang Scholars and the Innovative Research Team in university (Grant No. 531105050037)