Effect of Contact Residual Stress Relaxation on Fracture Strength of Indented Soda-Lime Glass

The strength of Vickers-indented soda-lime glass measured in air at room temperature steadily increases with time after indentation, whereas optical retardation steadily decreases in the same interval. Annealing after indentation causes further strength increase and retardation decrease. The results are consistent with Marshall and Lawn's treatment of the slow crack growth of indentation flaws driven by the combined influence of residual contact stress and applied stress. Post-indentation strengthening of indentation flaws can be explained without recourse to flaw blunting.     

Factors affecting cloud point analysis of palm oleins

Some of the factors affecting cloud point determination of palm oleins are described. These are the type of container used, method of stirring, rate of stirring and bath temperature. The repeatability and reproducibility standard deviations of the method are determined from collaborative trials. Recommendations for the test are made to reduce the large variations among laboratories.     

Stability studies on methyl and ethyl fatty acid esters of sunflowerseed oil

Fatty acid esters, high in linoleic acid, were prepared and stored for long-term engine tests. Storage tests with these esters were undertaken to obtain more information on optimal storage requirements and general stability characteristics. Samples were kept at three temperature levels (20 C, 30 C and fluctuating around 50 C) for a 90-day period and were removed at regular intervals for chemical and physical analysis. The influence of air, temperature, light, TBHQ and contact with mild steel was evaluated by comparing the free fatty acid, peroxide, anisidine, ultraviolet absorption, viscosity and induction periods. A statistical model was used to evaluate the data and to reduce the large number of data points to comparable curves. Storage of esters in contact with air, especially at a temperature above 30 C, resulted in significant increases in peroxide, ultraviolet absorption, free fatty acid, viscosity and anisidine values. Exclusion of air retarded oxidation at all temperature levels. A direct relationship between viscosity increases and oxidation parameters was evident. Exposure to light caused a small increase in the oxidation parameters of esters stored at the highest temperature level. Addition of TBHQ prevented oxidation of samples stored under moderate conditions. Under unfavorable storage conditions the anti-oxidant was no longer effective. Mild steel had very little effect on the oxidation parameters. Only the anisidine values of samples stored at the highest temperature level were slightly increased. Methyl esters performed slightly better than ethyl esters during the storage test. The following practical guidelines for storage of fatty acid ester fuels are: (i) airtight containers should be used; (ii) the storage temperature should be <30 C; (iii) mild steel (rust free) containers may be used, and (iv) TBHQ has a beneficial effect on oxidation stability.     

Performance of combined cobalt—nickel—zirconia and HZSM-5 catalyst systems for carbon monoxide hydrogenation

The synthesis of hydrocarbons via hydrogenation of carbon monoxide was investigated over cobalt—nickel—zirconia catalysts of various compositions in combination with zeolite HZSM-5 in “mixed bed” and “follow bed” arrangements. These combinations resulted in the formation of aromatics in amounts as high as 30-35 wt% under relatively mild operating conditions (1 atm, 250–280°C). Although the olefinicity of C₂ and C₃ fractions in the product stream was higher in the mixed bed compared to the follow bed arrangement, the selectivities to aromatics were comparable in the two bed arrangements. The aromatic selectivity was found to be sensitive to operating conditions. The formation of aromatics was favored at high HZSM-5/metal catalyst ratios, low space velocities and high reaction temperatures. The product distributions obtained using various metal/zeolite bifunctional catalysts have been discussed.     

Channel capacity and state estimation for state-dependent Gaussian channels

We formulate a problem of state information transmission over a state-dependent channel with states known at the transmitter. In particular, we solve a problem of minimizing the mean-squared channel state estimation error E/spl par/S/sup n/ - S/spl circ//sup n//spl par/ for a state-dependent additive Gaussian channel Y/sup n/ = X/sup n/ + S/sup n/ + Z/sup n/ with an independent and identically distributed (i.i.d.) Gaussian state sequence S/sup n/ = (S/sub 1/, ..., S/sub n/) known at the transmitter and an unknown i.i.d. additive Gaussian noise Z/sup n/. We show that a simple technique of direct state amplification (i.e., X/sup n/ = /spl alpha/S/sup n/), where the transmitter uses its entire power budget to amplify the channel state, yields the minimum mean-squared state estimation error. This same channel can also be used to send additional independent information at the expense of a higher channel state estimation error. We characterize the optimal tradeoff between the rate R of the independent information that can be reliably transmitted and the mean-squared state estimation error D. We show that any optimal (R, D) tradeoff pair can be achieved via a simple power-sharing technique, whereby the transmitter power is appropriately allocated between pure information transmission and state amplification.     

Stochastic response of flexible rotor-bearing system to seismic excitations

Random vibration analysis of flexible rotor-bearing systems subjected to six-component nonstationary earthquake ground accelerations is carried out. The rotor system consists of several rigid disks and a flexible shaft that is modelled as a Timoshenko beam. The governing equations of motion involve both inhomogeneous random excitations and random parametric excitations. Analytically, the Markov vector approach using the Ito equation and Stratonovich averaging procedures is employed to determine the response statistics. Unfortunately, the second moments of the response quantities thus obtained involve a great discrepancy when compared with the results of Monte Carlo simulation. The difficulty involved in analytically solving such a complicated problem is pointed out. Currently, the method of Monte Carlo simulation appears to be the only practical approach for such a problem. The significant influence of the seismic base rotations and the flexibility of the rotor-bearing system on the overall dynamic structural response is demonstrated by a numerical example.     

A slotted post-wall waveguide array with interdigital structure for 45/spl deg/ linear and dual polarization

This work proposes a dual-polarized planar antenna; two post-wall slotted waveguide arrays with orthogonal 45/spl deg/ linearly-polarized waves interdigitally share the aperture on a single layer substrate. Uniform excitation of the two-dimensional slot array is confirmed by experiment in the 25 GHz band. The isolation between two slot arrays is also investigated in terms of the relative displacement along the radiation waveguide axis in the interdigital structure. The isolation is 33.0 dB when the relative shift of slot position between the two arrays is -0.5/spl lambda//sub g/, while it is only 12.8 dB when there is no shift. The cross-polarization level in the far field is -25.2 dB for a -0.5/spl lambda//sub g/ shift, which is almost equal to that of the isolated single polarization array. It is degraded down to -9.6 dB when there is no shift.     

Conflict detection and resolution in two-dimensional prefix router tables

We show that determining the minimum number of resolve filters that need to be added to a set of two-dimensional (2-D) prefix filters so that the filter set can implement a given policy using the first-matching-rule-in-table tie breaker is NP-hard. Additionally, we develop a fast O(nlogn+s) time, where n is the number of filters and s is the number of conflicts, plane-sweep algorithm to detect and report all pairs of conflicting 2-D prefix filters. The space complexity of our algorithm is O(n). On our test set of 15 2-D filter sets, our algorithm runs between 4 and 17 times as fast as the 2-D trie algorithm of A. Hari et al. (2000) and uses between 1/4th and 1/8th the memory used by the algorithm of Hari et al. On the same test set, our algorithm is between 4 and 27 times as fast as the bit-vector algorithm of Baboescu and Varghese (2002) and uses between 1/205 and 1/6 as much memory. We introduce the notion of an essential resolve filter and develop an efficient algorithm to determine the essential resolve filters of a prefix filter set.     

Crushing behaviour of the energy absorbing 'tensor skin' panels

ABSTRACT Research results concerning the simulation of the crushing behaviour of composite systems with energy absorption characteristics are presented in the present work. The study is focused on the ‘tensor skin’ concept, an energy absorbing composite system that was originally developed to improve the crashworthiness of helicopters under water impact and which is promising for utilization in the construction of the lower part of composite fuselage aircraft. The ‘tensor skin’ concept comprises a folded or corrugated composite construction, which upon loading unfolds by forming ‘plastic hinges’, leading to an increase in the load bearing capability of the structure. The numerical modelling issues and the critical aspects of the simulation are discussed. Verification of the numerical simulation procedure is performed by experimental work. The experimental results utilized to assess and validate the numerical procedure were derived within the European Research Project ‘Design for Crash Survivability – CRASURV’ (BRITE – Aeronautics Area). The results of the simulations are generally in good agreement with experimental data.