Modeling of optical low coherence reflectometry recorded Braggreflectograms: evidence to a decisive role of Bragg spectral selectivity

This paper draws attention to the basic principles governing reflections in uniform Bragg reflectors (BR) when measured employing optical low coherence reflectometry (OLCR) technique. Using computations based on transfer matrix method (TMM), we first showed a strong spectral dependence of Bragg reflectograms on an OLCR probe spectrum. Later, this dependence is exploited to evaluate, for the first time, the coupling coefficient κ of a Bragg grating in a distributed Bragg reflector (DBR) laser on InP     

Si/SiGe n-MODFETs on thin SiGe virtual substrates prepared by means of He implantation

Si/SiGe n-type modulation-doped field-effect transistors grown on a very thin strain-relieved Si/sub 0.69/Ge/sub 0.31/ buffer on top of a Si(100) substrate were fabricated and characterized. This novel type of virtual substrate has been created by means of a high dose He ion implantation localized beneath a 95-nm-thick pseudomorphic SiGe layer on Si followed by a strain relaxing annealing step at 850/spl deg/C. The layers were grown by molecular beam epitaxy. Electron mobilities of 1415 cm/sup 2//Vs and 5270 cm/sup 2//Vs were measured at room temperature and 77 K, respectively, at a sheet carrier density of about 3/spl times/10/sup 12//cm/sup 2/. The fabricated transistors with Pt-Schottky gates showed good dc characteristics with a drain current of 330 mA/mm and a transconductance of 200 mS/mm. Cutoff frequencies of f/sub t/=49 GHz and f/sub max/=95 GHz at 100 nm gate length were obtained which are quite close to the figures of merit of a control sample grown on a conventional, thick Si/sub 0.7/Ge/sub 0.3/ buffer.     

An active charge, passive discharge floor space heating system

This space heating system has a rockbed beneath and in contact with the floor of a dwelling, which is heated by radiation and convection from the floor. The ability of the heating system to maintain comfort conditions with no additional energy input is discussed and it is shown that the system is more suitable for use in mild climates than severe ones. Experimental work on horizontal air flow rockbeds is reported and shows that shallow beds can be designed in the same way as vertical air flow beds. The influence of natural convection on the effective thermal conductivity of the experimental rockbeds is reported.     

Preliminary Development of a Model and Measure of Computer-Mediated Communication (CMC) Competence

The rationale for developing a theoretical model of computer-mediated communication (CMC) competence is established through review of social trends in the use of new media technologies. Special attention is paid to the role new media play in the formation and development of personal relationships. A model of CMC competence is then developed along the lines of motivation, knowledge, skills, context, and outcomes as a metaphorical typology for organizing existing CMC research. This research is reviewed as it informs, and is organized by, the model of CMC competence. A sampling of formal propositions resulting from the model is elaborated, and the results of preliminary pilot studies of the model are reviewed. The model is offered as a first step in examining individual differences in the domain of CMC relationships and media choice.     

Ionoluminescence decay measured with single ions

A new ion beam analysis-based, single ion technique called the time to first photon has been developed to measure the decay of the luminescence signal of phosphors. Such measurements are currently needed to study luminescence decay mechanisms following high-density excitations and to identify strongly luminescent phosphor coatings with short lifetimes for ion photon emission microscopy (IPEM). The samples for this technique consist of thin phosphor layers placed or coated on the surface of PIN diodes. Single ions from an accelerator strike this sample and simultaneously create ion beam induced luminescence (IBIL) from the phosphor that is measured by a single-photon-detector, and an ion beam induced charge collection (IBICC) signal in the PIN diode. In this case, the IBICC signal provides the start pulse and the IBIL signal the stop pulse to a time to amplitude converter. It is straightforward to show that this approach also measures a signal proportional to activity versus time with an accuracy of 5% as long as the number of detected photons per ion is less than 0.1, which usually requires the use of absorbers for the IBIL detector or electronic discrimination for the IBIL signals. Details of the new analysis are given together with examples of luminescence decay measurements of several ceramic phosphors being considered to coat IPEM samples. IPEM is currently being developed at Sandia National Laboratory (SNL), the University of North Texas in Denton, and the Universities and INFN of Padova and Torino.     

Magnetic induction micromachine-part III:Eddy currents and nonlinear effects

The magnetic induction micromachine fabricated in Part II was not laminated, as designed in Part I. Consequently, eddy currents in the stator core, and the associated nonlinear saturation, significantly decreased its performance from that predicted in Part I. To investigate and explain these phenomena and their consequences, this paper models the behavior of the solid-stator-core machine fabricated in Part II using a finite-difference time-domain numerical analysis. The inherent stiffness in the time-domain integration of Maxwell's equations is mitigated via reducing the speed of light artificially by five orders of magnitude, while taking special care that assumptions of magneto-quasi-static behavior are still met. The results from this model are in very good agreement with experimental data from the tethered magnetic induction micro motor.