Effect of matrix liquid phase on interphase formation in SiC fibre-reinforced Si2N2O-Al2O3-CaO composites

Matrix compositions based on Si₂N₂O, with Al₂O₃ and CaO additions, were used to hot press Nicalon SiC fibre-reinforced composites at 1600 °C. With both CaO and Al₂O₃ additions, eutectic melting formed an appreciable volume of liquid phase during hot pressing, which remained as a stable glassy phase in the cooled composites. This liquid phase fostered formation of 240 nm thick carbon-rich interphases between the fibres and the matrix. These interphases showed relatively low interfacial shear strength and resulted in composites which showed non-catastrophic, notch-independent fracture. Matrices using either Al₂O₃ or CaO did not form adequate liquid phase to form coarse interphases, and fracture was catastrophic in nature. Post-heat treatment of the composites at 1000 °C showed peripheral oxidation (removal of the carbon content of the interphase) indicating limited protection afforded when glassy phase was present in the matrix. Controlled cooling in the hot press did not cause the liquid regions to devitrify.     

Fractal and topological characterization of branching patterns on the fracture surface of cross-linked dimethacrylate resins

The branching patterns formed as a result of crack growth in dimethacrylate resins below their glass transition temperatures looked similar to fractal trees. The skeletons of the patterns were analysed numerically for their topological and geometrical properties. The number of branches, N _i , mean branch lengths, N _i , and branch angles of a particular order, defined according to the Strahler and inverted Weibel schemes, followed exponential scaling behaviour: N _i (R _b )^–i and L _i (R _l ) ⁱ . Using the relationship for the fractal dimension D=In R _B /In R _L , a value of D=1.4 was obtained for the fracture pattern. Fractal behaviour was also examined by the box-counting method which indicated a power-law dependence of the mass on the box size with fractal dimension exponent D=1.4 in the case of the fracture pattern. However, the mass-shell method for both the fracture pattern and the fractal trees gave an exponential increase of mass with distance from the origin, rather than the power-law behaviour expected for fractals. This was attributed to the fact that branches of different sizes were distributed in restricted regions of space closer to the periphery, rather than uniformly over the whole pattern.     

Latch Applicator for Efficient Delivery of Dissolving Microneedles Based on Rapid Release of Elastic Strain Energy by Thumb Force (Adv. Funct. Mater. 11/2023)

Dissolving microneedle (DMN) is an attractive alternative to parenteral and enteral drug administration owing to its painless self-administration and safety due to non-generation of medical waste. For reproducible and efficient DMN administration, various DMN application methods, such as weights, springs, and electromagnetic devices, have been studied. However, these applicators have complex structures that are complicated to use and high production costs. In this study, a latch applicator that consists of only simple plastic parts and operates via thumb force without any external complex device is developed. Protrusion-shaped latches and impact distances are designed to accumulate thumb force energy through elastic deformation and to control impact velocity. The optimized latch applicator with a pressing force of 25 N and an impact velocity of 5.9 m s⁻¹ fully inserts the drug-loaded tip of the two-layered DMN into the skin. In an ovalbumin immunization test, DMN with the latch applicator shows a significantly higher IgG antibody production rate than that of intramuscular injection. The latch applicator, which provides effective DMN insertion and a competitive price compared with conventional syringes, has great potential to improve delivery of drugs, including vaccines.     

New Mean-Squared-Error Filter Design Method for Multiple-Input Multiple-Output Amplify-and-Forward Relay Systems with a Non-negligible Direct Link

Usage of Internet has increased enormously in this decade due to the pandemic began due to COVID19. Data in the form of Text, Image and Video are communicated across the world through mails, chat applications and meeting applications etc. Such third-party applications are vulnerable while sensitive information such as personal, financial, medical and military communications occurs. Visual Cryptography (VC) is an encryption scheme that protects data in the form of image. In source, VC encrypts the image by dividing into shares and distributes to the receiver side. At the destination, the shares are stacked together physically or digitally to reveal the original data. VC also uses cover images to enhance security. VC supports secret sharing of multiple images. In this research paper, a new Multiple grayscale Secret Image Sharing (MSIS) strategy is proposed for secure transmission of more than one grayscale secret image data to the destination. MSIS uses color cover images to enhance the security. It also minimizes the number of shares and cover images to reduce the complexity.

     

Robust Geodesic Regression

International Journal of Computer Vision - This paper studies robust regression for data on Riemannian manifolds. Geodesic regression is the generalization of linear regression to a setting with a...     

Revolving Vernier Mechanism Controls Size of Linear Homomultimer

A new kind of the Vernier mechanism that is able to control the size of linear assembly of DNA origami nanostructures is proposed. The mechanism is realized by mechanical design of DNA origami, which consists of a hollow cylinder and a rotatable shaft in it connected through the same scaffold. This nanostructure stacks with each other by the shape complementarity at its top and bottom surfaces of the cylinder, while the number of stacking is limited by twisting angle of the shaft. Experiments have shown that the size distribution of multimeric assembly of the origami depends on the twisting angle of the shaft; the average lengths of the multimer are decamer, hexamer, and tetramer for 0°, 10°, and 20° twist, respectively. In summary, it is possible to affect the number of polymerization by adjusting the precise shape and movability of a molecular structure.     

Synthesis of Co/SiO2 hybrid nanocatalyst via twisted Co3Si2O5(OH)4 nanosheets for high-temperature Fischer-Tropsch reaction

A cobalt-silica hybrid nanocatalyst bearing small cobalt particles of diameter ～5 nm was prepared through a hydrothermal reaction and hydrogen reduction.The resulting material showed very high CO conversion (＞82％) and high hydrocarbon productivity (～1.0 gHc·g-1cat,·h-11) with high activity (～8.5 x 10-5 molco·g-1Co·S-1) in the Fischer-Tropsch synthesis reaction.     

Developing a virtual machining model to generate MTConnect machine-monitoring data from STEP-NC

The ability to predict performance of manufacturing equipment during early stages of process planning is vital for improving efficiency of manufacturing processes. In the metal cutting industry, measurement of machining performance is usually carried out by collecting machine-monitoring data that record the machine tool’s actions (e.g. coordinates of axis location and power consumption). Understanding the impacts of process planning decisions is central to the enhancement of the machining performance. However, current methodologies lack the necessary models and tools to predict impacts of process planning decisions on the machining performance. This paper presents the development of a virtual machining model (called STEP2M model) that generates machine-monitoring data from process planning data. The STEP2M model builds upon a physical model-based analysis for the sources of energy on a machine tool, and adopts STEP-NC and MTConnect standardised interfaces to represent process planning and machine-monitoring data. We have developed a prototype system for 2-axis turning operation and validated the system by conducting an experiment using a Computer Numerical Control lathe. The virtual machining model presented in this paper enables process planners to analyse machining performance through virtual measurement and to perform interoperable data communication through standardised interfaces.     

Improvement in mechanical properties of recycled GF prepreg with CNT reinforced composites using a spray coating method

Dispersion and shape of nanoparticles, as well as interfacial conditions, add significantly to difficulties in composite manufacture. In the work reported here, an innovative method of recycling composites using out-of-date prepreg was investigated in which the carbon nanotube (CNT) on the prepreg was optimally coated. Nanocomposites utilizing the out-of-date prepreg were coated with CNT and fabricated by a sheet molding method. CNT nanofillers were observed to be uniformly dispersed on epoxy prepreg by spray coating. The mechanical and interfacial properties of these CNT coated nanocomposites were improved over those of more conventionally manufactured carbon fiber/epoxy composites. The CNT nanofillers were embedded at the epoxy and fiber interface, as a result of etching of the epoxy prepreg surface by a CNT dispersion solution which enhanced interfacial reactivity.