光学薄膜在光通信中的应用

主要介绍了光学薄膜在光通信的无源型器件中的原理及应用,并与光纤光栅和平面光波导型的无源器件作简单比较。     

EPON媒体接入控制的关键技术研究

文章简要介绍了基于以及太网的无源光网络（EPON）这种新型的接入网技术，将其与基于ATM技术的无源光网络（APON）的优缺点进行了比较，并对其媒体接入控制（MAC）的关键技术测距及上行接入进行了讨论，初步提出了光网络单元（ONU）的软、硬件实现方案。     

一种嵌入式TCP／IP的实现

针对许多小型嵌入式系统要求结构紧凑、开销小的TCP／IP协议栈的需求，提出一种可移植的非路由器TCP／IP原型的实现。该TCP／IP原型基于某种小型嵌入式系统，依据RFC1122兼容性规定，提供IP、ARP、TCP、UDP服务和Berkeley Socket编程接口。该实现代码短小，开销低，性能能够满足多数应用需求，具有较强的可移植性。     

On teletraffic applications to OBS

We provide teletraffic models for loss probability evaluation of optical burst switching (OBS). We show that the popular Engset formula is not exact for OBS modeling and demonstrate that in certain cases it is not appropriate. A new exact model is provided. The various models are compared using numerical results for various OBS alternatives with and without burst segmentation.     

建设工程质量保证体系存在的问题及对策

结合建筑业市场管理体制的改革及其发展态势，就建筑工程质量保证体系存在的问题作了阐述，从加强勘察设计资格的管理，完善监理法规等方面，提出了健全和完善质保体系的措施。     

质子和中子的单粒子效应等效性实验研究

通过实验方法确定了高能质子和中子引起的单粒子效应等效关系，实验中采用金箔散射法降低了质子束流强度，并利用热释光剂量计（TLD）进行质子注量的监测，采用新研制的存储器长线实时监测系统，进行了64K位至4M位的SRAM器件单粒子效应实验，确定了两种粒子引起单粒子效应等效关系。     

弹药内弹道性能检验新方法数学模型的建立

本文对弹药内弹道性能检验的传统方法存在的问题进行了分析,提出了一种新的检验方法,重点对新的检验方法的数学模型的建立过程进行了论述。并对数学模型的精度进行了分析、检验和验证。     

Transient hot-electron effect and its impact on circuit reliability

Transient hot-electron effect and its impact on circuit reliability are investigated. The rate of device decay is monitored as a function of the gate pulse transient period. Simulation results reveal that excess charges during a fast turn off time may cause an increase in the maximum substrate current. This, along with our experimental data, identifies that transient excess carrier may cause the enhancement of device degradation under certain stress conditions. The enhancement factor of the degradation is a function of the gate pulse transient time. Correlation between the analysis based upon AC/DC measurement and calculations based upon transient simulation are shown in the paper. Better agreement with experimental data is obtained by using the transient analysis and on chip test/stress structures. The correlation between AC and DC stress data is also shown based on the impact ionization model. A hot-electron design guideline is proposed based on the circuit reliability analysis. This guideline can help improve the circuit reliability without adversely effecting the circuit performance.     

前馈和反馈相结合的控制策略在宝钢线材厂控冷轧线上的应用实践

在详细分析料坯在水箱内冷却热过程特点的基础上，提出了前馈和反馈相结合的水流量优化控制策略，并将该策略应用于宝钢线材厂控冷轧线上。实际运行结果表明：该策略能够合理地控制水箱水流量，从而保证了线材水箱出口处的温度满足工艺要求，大大提高了线材成品的质量。所做工作对国内同类企业有重要的意义。